Altronix ACM4E Series ACM4CBE Access Power Controllers Tataiso ea ho Kenya

Altronix ACM4E le ACM4CBE Access Power Controllers li fetola e le 'ngoe (1) 12 ho 24-volt AC kapa DC input ho tse' nè (4) tse laoloang ka boithaopo tse fused kapa tse sirelelitsoeng ke PTC. Lisebelisoa tsena tsa matla li ka fetoloa ho mabitso a "C" a omileng (ACM4E feela). Lintho tse hlahisoang li sebelisoa ke sink e bulehileng ea pokello kapa ka tloaelo ho buloa (NO) ho kenya letsoho le omileng ho tloha ho Access Control System, Card Reader, Keypad, Push Button, PIR, joalo-joalo. Liloko, Litokelo tsa Motlakase, Lits'oere tsa mamati a Magnetic, joalo-joalo. Lintho tse hlahisoang li tla sebetsa ka mekhoa ea Fail-Safe le/kapa Fail-Secure. Diyuniti li etselitsoe ho tsamaisoa ke mohloli o le mong o tloaelehileng oa matla o tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela, kapa mehloli e 'meli (2) e ikemetseng ka ho felletseng, e le' ngoe (1) e fana ka matla a ts'ebetso ea boto le e 'ngoe bakeng sa senotlolo / lisebelisoa. matla. FACP Interface e nolofalletsa Emergency Egress, le Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Tšobotsi ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho leha e le life kapa kaofela tse robeli (8).

ACM4E le ACM4CBE Configuration Reference Chart

Ha e sebelisoa le Class 2 Reted Power-Limited power supply.
ANSI/UL 294 7th Ed. Maemo a Ts'ebetso ea Taolo ea Phihlello: Tlhaselo e Senyang - I; Mamello - IV; Line Security - I; Matla a ho ema - I.

Litlhaloso

12 ho 24-volt AC kapa ts'ebetso ea DC (ho beha ha ho hlokahale). (0.6A @ 12 volt, 0.3A @ 24 volt ts'ebeliso ea hona joale e nang le li-relay tsohle tse matlafalitsoeng).
Likhetho tsa ho kenya motlakase:
- Motlakase o le mong (1) o tloaelehileng (boto le matla a senotlolo).
- Lisebelisoa tsa motlakase tse peli (2) tse arohaneng (e le 'ngoe (1) bakeng sa matla a boto le e le' ngoe (1) bakeng sa senotlolo / matla a lisebelisoa).

Tse 'nè (4) tse kenyang mokhoa oa ho laola ho kena:
- Tse nne (4) tse atisang ho buloa (NO).
- Lisebelisoa tse 'nè (4) tse bulehileng tsa pokello ea metsi.
- Motsoako ofe kapa ofe oa tse ka holimo.

Liphetho tse 'ne (4) tse laoloang ka boikemelo:
- Tse 'nè (4) Fail-Sireletsehile le/kapa Fail-Sireletsehile matla a tsoang.
- Mefuta e mene (4) e omileng "C" 5A e lekantsoe liphetho tsa relay (ACM4E feela).
- Motsoako ofe kapa ofe oa tse ka holimo (ACM4E feela).

Lisebelisoa tse 'nè (4) tse thusang (tse sa fetoheng).
Lintlha tse hlahisoang:
- ACM4E: Li-Fuse li lekantsoe 3.0A ka 'ngoe.
- ACM4CBE: PTCs ba rated 2.5A mong le e mong.

Fuse e kholo e lekantsoe ho 10A.
Hlokomela: Kakaretso ea tlhahiso ea hona joale e khethoa ke phepelo ea matla, e se ke ea feta palo e kholo ea 10A.
Li-LED tse khubelu li bonts'a hore lihlahisoa li hlahisoa (li-relays li matlafalitsoe).

Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8). Likhetho tsa ho kenya Alarm ea Mollo:
- Ka tloaelo ho buloa (NO) kapa ka tloaelo ho koetsoe (NC) ho omella ho kopanya.
- Kenyelletso ea ho khutlisa polarity ho tsoa ho potoloho ea matšoao a FACP.
FACP output relay (foromo “C” contact rated @ 1A 28VDC, ha e hlahlojoe ke UL).

LED e tala e bonts'a ha FACP e khaotsoe.
Li-terminal blocks tse ka ntshuwang li thusa ho kenya habonolo.

Bophahamo ba Sebaka (H x W x D): 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).

Litaelo tsa ho Hloma

Beha yuniti sebakeng se lakatsehang. Tšoaea le ho phunya masoba leboteng ho tsamaisana le likoti tse peli tse ka holimo sebakeng se kampetsoeng. Kenya li-fasteners le li-screws tse peli leboteng 'me lihlooho tsa screw li hlahelle. Beha likoti tse ka holimo tsa sekoahelo holim'a likurufu tse peli tse ka holimo; boemo le ho sireletseha. Tšoaea boemo ba likoti tse tharo tse tlase. Tlosa sebaka se kampetsoeng. Hlakola likoti tse tlase ebe u kenya li-fasteners tse peli. Beha masoba a ka holimo a kokelo holim'a likurufu tse peli tse ka holimo. Kenya li-screw tse peli tse tlase 'me u tiise hore u tiisa li-screw tsohle (Enclosure Dimensions, pg. 7).
Ka hloko review:
- Lisebelisoa tsa LED
- Lethathamo la Boitsebiso ba Terminal
- Setšoantšo se Tloaelehileng sa Kopo
- Lits'oants'o tsa ho hoka
Phepelo ea motlakase:
Litsi li ka tsamaisoa ka matla a le mong (1) a tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela kapa lisebelisoa tse peli (2) tse arohaneng tsa motlakase, e le 'ngoe (1) ho fana ka matla bakeng sa ts'ebetso ea boto le e' ngoe ho fana ka matla. bakeng sa lisebelisoa tsa ho notlela le/kapa lisebelisoa tsa taolo ea phihlello.
Hlokomela: Matla a kenyang e ka ba 12 ho isa ho 24 volts AC kapa DC (0.4A @ 12 volt, 0.2A @ 24 volt ts'ebeliso ea hona joale ka li-relay tsohle tse matlafalitsoeng).
- Phepelo ea motlakase e le 'ngoe:
  Haeba yuniti le lisebelisoa tsa ho notlela li tla tsamaisoa ho sebelisoa Sesebelisoa se le seng sa Lethathamo la ho Laola Matla a ho Finyella, hokela tlhahiso (12 ho 24 volts AC kapa DC) ho li-terminals tse tšoailoeng [- Control +].
- Lisebelisoa tse peli tsa phepelo ea motlakase (setšoantšo sa 1):
  Ha ho lakatseha tšebeliso ea Lisebelisoa tse peli tse thathamisitsoeng tsa Matla a ho Laola Matla, li-jumpers J1 le J2 (tse ka letsohong le letšehali la li-terminals tsa matla / taolo) li tlameha ho khaoloa. Hokela matla a yuniti ho li-terminals tse tšoailoeng [- Control +] 'me u hokele matla bakeng sa lisebelisoa tsa ho notlela lienteng tse tšoailoeng [- Power +].
  Hlokomela: Ha u sebelisa DC Listed Access Control Power Supplies polarity e tlameha ho hlokomeloa. Ha u sebelisa AC Listed Access Control Power Supplies polarity ha ea lokela ho hlokomeloa.
  Hlokomela: Bakeng sa ho latela melao ea UL, phepelo ea motlakase e tlameha ho ngolisoa ka UL bakeng sa Litsamaiso tsa Taolo ea Phihlelo le lisebelisoa.
Likhetho tsa tlhahiso (setšoantšo sa 1, leqephe la 5):
ACM4E e tla fana ka lisebelisoa tse 'nè (4) tse fetotsoeng tsa matla, lihlahisoa tse' nè (4) tse omeletseng tsa "C", kapa motsoako ofe kapa ofe oa matla a mabeli a fetotsoeng le lihlahisoa tsa "C", hammoho le lisebelisoa tse 'nè (4) tse sa fetoheng tsa motlakase. ACM4CBE e tla fana ka lisebelisoa tse 'nè (4) tse fetotsoeng tsa matla kapa tse' nè (4) tse sa fetoheng tsa matla a thusang.
- Liphetoho tsa Power tse fetotsoeng:
  Hokela molaetsa o fosahetseng (–) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [COM]. Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
- Liphetho tsa Foromo ea "C" (ACM4E):
  Ha foromo ea "C" e lakatseha, fuse e tsamaisanang le eona (1-4) e tlameha ho tlosoa. Hokela negative (–) ea phepelo ea motlakase ka kotloloho ho sesebelisoa sa ho notlela. Hokela positi (+) ea phepelo ea motlakase ho theminale e tšoailoeng [C]. Bakeng sa ts'ebetso ea Fail-Safe, hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NO].
- Lisebelisoa tsa Matla a Thusang (tse sa fetoloang):
  Hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [C] le negative (–) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
  Hlokomela: Ha wiring bakeng sa tlhahiso e fokolang ea matla e sebelisa ho kokota ho fapana le e sebelisoang bakeng sa lithapo tse se nang matla.
Likhetho tsa ho kenya letsoho (setšoantšo sa 1, leqephe la 5):
- Ka tloaelo Bula [NO] trigger ea ho kenya:
  Litlhahiso tsa 1-4 li kentsoe tšebetsong ka mokhoa o tloaelehileng oa ho kenya sekontiri se bulehileng kapa se bulehileng. Hokela lisebelisoa (libali tsa likarete, li-keypad, kopo ea ho tsoa likonopo, joalo-joalo) ho litheminale tse tšoailoeng [IN] le [GND].
- Open Collector Sink inputs:
  Hokela phanele ea taolo ea phihlello 'me u bule tlhahiso ea pokello ho theminale e tšoailoeng [IN] le e tloaelehileng (negative) ho theminale e tšoailoeng [GND].
Likhetho tsa Sehokelo sa Alarm ea Mollo (Setšoantšo sa 3 ho isa ho sa 7, leqephe la 6):
[NC] eo hangata e koetsoeng, eo hangata e bulang [NO] kapa keno e khutlisang polarity ho tsoa ho potoloho ea matšoao ea FACP e tla hlahisa likhetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa tlhahiso, tima switch e tsamaellanang le eona [SW1- SW4] TIMA. Ho tima FACP hakoa bakeng sa tlhahiso, bulela switch e tsamaisanang le eona [SW1-SW4].
- Ka tloaelo Bula [NO] ho kenya:
  Bakeng sa ho se latching hook-up bona Setšoantšo sa 4, leq. 6. Bakeng sa ho latching hook-up bona Setšoantšo sa 5, leq. 7.
- Hangata ho koetsoe [NC]:
  Bakeng sa ho se latching hook-up bona Setšoantšo sa 6, leq. 7. Bakeng sa ho latching hook-up bona Setšoantšo sa 7, leq. 7.
- Sehlomathisi se kenyang sa Potoloho ea Pontšo ea FACP:
  Hokela positive (+) le negative (–) ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP –]. Hokela FACP EOL ho li-terminals tse tšoailoeng [+ RET –] (polarity e hlalositsoe boemong ba alamo). Jumper J3 e tlameha ho khaoloa (setšoantšo sa 3, leqephe la 6).
FACP Dry form "C" tlhahiso (setšoantšo sa 1a, leqephe la 5):
Hokela sesebelisoa se lakatsehang se ka hlahisoang ke khokahanyo e ommeng ea yuniti ho liteminale tse tšoailoeng [NO] le [C] FACP bakeng sa tlhahiso e tloaelehileng e bulehileng kapa litheminale tse tšoailoeng [NC] le [C] FACP bakeng sa tlhahiso e tloaelehileng e koetsoeng.
Ho kenngoa ha tamper switch (Ha e kenyelelitsoe):
Thaba ea UL Listed tamper switjha (Altronix Model TS112 kapa e lekanang) ka holimo ho sebaka se kampetsoeng. Tsamaisa tamper switjha borakete moeling oa sebaka se kampetsoeng hoo e ka bang 2” ho tloha ka lehlakoreng le letona. Kopanya tamper switjha wiring ho Listed Access Control Panel kapa sesebelisoa se nepahetseng sa UL Listed reporting ho kenya lets'oao la alamo ha lemati la sebaka se kampetsoeng le butsoe.

Tlhokomelo

Yuniti e lokela ho lekoa bonyane hang ka selemo bakeng sa ts'ebetso e nepahetseng. Molumotage ho sehlahisoa se seng le se seng se tlameha ho lekoa bakeng sa linaha tse qalang le tseo e seng li-trigger mme ts'ebetso ea interface ea FACP e tlameha ho etsisoa.

Lisebelisoa tsa LED

LED	ON	TLOA
LED 1 – LED 4 (Khubelu)	Li-relay tse hlahisoang li matlafalitsoe.	Li-relay li feletsoe ke matla.
TRG (Tala)	Ho kenya FACP (boemo ba alamo).	FACP e tloaelehileng (boemo boo e seng alamo).

Lethathamo la Boitsebiso ba Terminal

Terminal Taba	Mosebetsi/Tlhaloso
– Matla +	12VDC ho 24VDC keno e tsoang ho UL Listed Access Control Power Supply.
– Taolo +	Li-terminals tsena li ka hokeloa sebakeng se arohaneng, sa UL Listed Access Control Power Supply ho fana ka matla a ts'ebetso a ikhethileng bakeng sa ACM4E/ACM4CBE. (li-jumpers J1 le J2 li tlameha ho tlosoa).
MOTS'EOA SE KENYA 1 – SE KENYA 4 HO, GND	Ho tsoa ho lisebelisoa tse tloaelehileng tse bulehileng le / kapa tse bulehileng tsa mokelli (kopo ea ho tsoa likonopo, ho tsoa li-PIR, joalo-joalo).
TLHALOSO EA 1 – OUTPUT 4 NC, C, NO, COM	Li-volts tse 12 ho isa ho tse 24 tsa AC/DC li baka liphetho tse laoloang: Fail-Safe [NC positive (+) & COM Negative (–)], Fail-Sireletsehile [HA HO positi (+) & COM Negative (–)], Sephetho sa tlatsetso [C positive (+) & COM Negative (-)] (Ha u sebelisa polarity ea matla a AC ha ea lokela ho bonoa), NC, C, NO fetoha foromo "C" 5A 24VAC/VDC e lekanyelitse liphello tse omeletseng ha li-fuse li tlosoa (ACM4E). Mabitso a bonts'itsoeng a sa qalelle.
FACP INTERFACE T, + INNPUT –	Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa trigger li ka buleha ka tloaelo, hangata li koetsoe ho tloha ho FACP output circuit (Fig. 3 through 7, pg. 6-7).
FACP INTERFACE NC, C, NO	Foromo "C" relay contact rated @ 1A/28VDC bakeng sa tlaleho ea alamo. (Sephetho sena ha se so hlahlojoe ke UL).

Setšoantšo se Tloaelehileng sa Kopo

Boloka lithapo tse lekanyelitsoeng matla li arohane le tse se nang matla. Sebelisa sebaka sa bonyane 0.25 ″.

TLHOKOMELISO:
Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa yuniti ho pula kapa mongobo. Fetola li-fuse (ACM4E feela) ka mofuta le litekanyetso tse tšoanang, 3A/32V.

Lits'oants'o tsa ho hoka

Setšoantšo sa 2

Ho hokela ka boikhethelo ho sebelisa lisebelisoa tse peli (2) tse ikhethileng tsa phepelo ea motlakase:

Setšoantšo sa 3
Kenyelletso ea ho khutlisa polarity ho tsoa ho sephetho sa potoloho ea matšoao a FACP (polarity e bonts'itsoe maemong a alamo):(Sephetho sena ha se so hlahlojoe ke UL).

Setšoantšo sa 4
Ka tloaelo Bula - Non-Latching FACP trigger input:

Setšoantšo sa 5
Ka tloaelo Open FACP Latching trigger input with reset: (Sephetho sena ha se eso hlahlojoe ke UL).

Setšoantšo sa 6
Hangata e Koetsoe - Kenyelletso ea FACP e sa Lapeng:

Setšoantšo sa 7
Hangata e Koetsoe - Latching FACP e kenya letsoho ka ho seta bocha (Sephetho sena ha se so hlahlojoe ke UL):

Kakaretso ea boholo (H x W x D e batla e lekanyelitsoe)

8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm)

Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fax: 718-567-9056 websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Warranty ea bophelo bohle
IIACM4E/ACM4CBE F25U.

Litokomane / Lisebelisoa

Altronix ACM4E Series ACM4CBE Access Power Controllers [pdf] Tlhophiso Tataiso
ACM4E Series, ACM4CBE, Access Power Controllers, ACM4E Series ACM4CBE Access Power Controllers

Litšupiso

Bukana ea Mosebelisi

Altronix ACM4E Series ACM4CBE Access Power Controllers

Fetileview