Altronix ACM4E Series ACM4CBE Access Power Controllers Installation Guide

Altronix ACM4E thiab ACM4CBE Access Power Controllers hloov ib qho (1) 12 mus rau 24-volt AC lossis DC input rau plaub (4) ntawm nws tus kheej tswj fused lossis PTC-tiv thaiv tawm. Cov zis hluav taws xob no tuaj yeem hloov pauv mus rau daim ntawv qhuav "C" hu (ACM4E nkaus xwb). Cov zis tawm tau qhib los ntawm lub dab dej qhib los yog ib txwm qhib (NO) cov lus qhia qhuav los ntawm Access Control System, Card Reader, Keypad, Push Button, PIR, thiab lwm yam. Cov chav nyob yuav xa lub zog mus rau ntau yam kev tswj xyuas cov cuab yeej siv xws li Mag Locks, Electric Strikes, Magnetic Door Holders, thiab lwm yam. Outputs yuav ua hauj lwm nyob rau hauv ob qho tib si Fail-Safe thiab/los yog Fail-Secure hom. Cov chav nyob yog tsim los siv los ntawm ib qho chaw siv hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv, lossis ob (2) tag nrho cov khoom siv hluav taws xob, ib qho (1) muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab lwm yam rau kev xauv / khoom siv. zog. FACP Interface ua rau muaj kev kub ntxhov ceev, thiab kev soj ntsuam lub tswb, lossis siv tau los ua rau lwm yam khoom siv pabcuam. Lub tswb hluav taws kub disconnect feature yog xaiv ib tus zuj zus rau ib qho lossis tag nrho ntawm yim (8) tso tawm.

ACM4E thiab ACM4CBE Configuration Reference Chart

Thaum siv nrog Class 2 Rated Power-Limited fais fab mov.
ANSI/UL 294 7th Ed. Kev Tswj Xyuas Kev Ua Haujlwm Qib: Kev Tawm Tsam Tawm Tsam - Kuv; Endurance - IV; Kab Kev Ruaj Ntseg - Kuv; Stand-by Lub Hwj Chim - I.

Specifications

12 mus rau 24-volt AC lossis DC ua haujlwm (tsis xav tau). (0.6A @ 12 volt, 0.3A @ 24 volt tam sim no noj nrog tag nrho cov relays energized).
Power supply input Options:
- Ib qho (1) cov khoom siv hluav taws xob sib xyaw (lub rooj tsavxwm thiab lub xauv lub zog).
- Ob (2) cov khoom siv hluav taws xob cais tawm (ib qho (1) rau lub rooj tsav xwm lub zog thiab ib qho (1) rau lub xauv / kho vajtse zog).

Plaub (4) Access Control System ua rau cov khoom nkag:
- Plaub (4) ib txwm qhib (NO) inputs.
- Plaub (4) qhib collector dab inputs.
- Ib qho kev sib xyaw ntawm cov saum toj no.

Plaub (4) ntawm nws tus kheej tswj cov zis:
- Plaub (4) Fail-Safe thiab/lossis Fail-Secure fais fab tuag.
- Plaub (4) daim ntawv qhuav "C" 5A rated relay outputs (ACM4E nkaus xwb).
- Ib qho kev sib xyaw ua ke ntawm cov saum toj no (ACM4E nkaus xwb).

Plaub (4) auxiliary power outputs (unswitched).
Tso zis ntsuas:
- ACM4E: Fuses raug ntsuas 3.0A txhua.
- ACM4CBE: PTCs raug ntsuas 2.5A txhua.

Main fuse yog ntsuas ntawm 10A.
Nco tseg: Tag nrho cov zis tam sim no yog txiav txim siab los ntawm cov khoom siv hluav taws xob, tsis pub tshaj 10A tag nrho.
Liab LEDs qhia tias cov zis tau tshwm sim (relays energized).

Hluav taws kub tswb disconnect (latching los yog tsis-latching) yog ib tug neeg xaiv rau ib los yog tag nrho ntawm yim (8) outputs. Fire Alarm disconnect input xaiv:
- Nquag qhib (NO) lossis ib txwm kaw (NC) kev tiv tauj qhuav.
- Polarity reversal input los ntawm FACP signaling circuit.
FACP tso zis relay (daim ntawv "C" tiv tauj @ 1A 28VDC, tsis ntsuas los ntawm UL).

Green LED qhia thaum FACP disconnect yog tshwm sim.
Tshem tawm cov terminal blocks yooj yim ntawm installation.

Enclosure Dimentions (H x W x D): 8.5 "x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).

Cov lus qhia installation

Mount chav nyob rau hauv qhov chaw xav tau. Kos thiab predrill qhov nyob rau hauv phab ntsa kom kab nrog rau sab saum toj ob keyhoes nyob rau hauv lub enclosure. Nruab ob sab saum toj fasteners thiab screws nyob rau hauv phab ntsa nrog cov ntsia hlau taub hau protruding. Muab lub qhov rooj xauv lub qhov rooj sab saud ntawm ob lub qhov rooj sab saud; qib thiab ruaj ntseg. Kos rau txoj hauj lwm ntawm peb lub qhov qis. Tshem tawm qhov thaiv. Laum lub qhov hauv qab thiab nruab ob lub fasteners. Muab lub qhov rooj xauv lub qhov rooj sab sauv rau ntawm ob lub qhov rooj sab saud. Txhim kho ob lub hauv qab screws thiab xyuas kom nruj tag nrho cov ntsia hlau (Enclosure Dimensions, pg. 7).
Ua tib zoo rovview:
- LED Diagnostics
- Terminal Identification Table
- Hom Daim Ntawv Thov
- Daim duab sib dhos
Lub hwj chim muab tswv yim:
Cov chav nyob tuaj yeem siv tau nrog ib qho (1) lub zog hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv los yog ob (2) cov khoom siv hluav taws xob sib cais, ib qho (1) muab lub zog rau lub rooj tsavxwm thiab lwm yam los muab lub zog. rau cov khoom siv xauv thiab / lossis nkag mus rau kev tswj hwm kho vajtse.
Nco tseg: Lub zog hluav taws xob tuaj yeem yog 12 txog 24 volts AC lossis DC (0.4A @ 12 volt, 0.2A @ 24 volt tam sim no noj nrog tag nrho cov relays energized).
- Ib qho hluav taws xob muab hluav taws xob input:
  Yog hais tias chav tsev thiab cov khoom siv xauv yuav tsum tau siv lub zog siv ib qho Kev Tswj Xyuas Kev Tswj Hluav Taws Xob, txuas cov zis (12 mus rau 24 volts AC lossis DC) rau cov terminals cim [– Control +].
- Dual fais fab mov inputs (Daim duab 1):
  Thaum siv ob Daim Ntawv Teev Kev Tswj Xyuas Cov Khoom Siv Hluav Taws Xob yog xav tau, jumpers J1 thiab J2 (nyob rau sab laug ntawm lub hwj chim / tswj terminals) yuav tsum raug txiav. Txuas lub hwj chim rau chav tsev mus rau lub terminals cim [– Control +] thiab txuas lub hwj chim rau cov khoom siv xauv rau cov terminals cim [– Fais fab +].
  Nco tseg: Thaum siv DC Listed Access Control Power Supplies polarity yuav tsum tau soj ntsuam. Thaum siv AC Listed Access Control Power Supplies polarity yuav tsum tsis txhob raug soj ntsuam.
  Nco tseg: Rau UL ua raws li cov khoom siv hluav taws xob yuav tsum yog UL Daim Ntawv Teev Npe rau Access Control Systems thiab accessories.
Cov kev xaiv tso zis (Fig. 1, pg. 5):
ACM4E yuav muab plaub (4) hloov hluav taws xob tawm, plaub (4) daim ntawv qhuav "C" tso tawm, lossis ib qho kev sib txuas ntawm ob qho tib si hloov hluav taws xob thiab daim ntawv "C" tso tawm, ntxiv rau plaub (4) cov khoom siv hluav taws xob tsis hloov pauv. ACM4CBE yuav muab plaub (4) hloov hluav taws xob tso tawm lossis plaub (4) cov khoom siv hluav taws xob tsis hloov pauv.
- Switched Fais fab tso zis:
  Txuas qhov tsis zoo (–) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [COM]. Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NC]. Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) cov tswv yim ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [NO].
- Daim ntawv "C" outputs (ACM4E):
  Thaum daim ntawv "C" cov zis xav tau, cov zis fuse (1-4) yuav tsum raug tshem tawm. Txuas qhov tsis zoo (–) ntawm cov khoom siv hluav taws xob ncaj qha mus rau lub ntsuas phoo. Txuas qhov zoo (+) ntawm lub hwj huam mov mus rau lub davhlau ya nyob twg cim [C]. Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [NC]. Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NO].
- Cov khoom siv hluav taws xob sib txuas (tsis hloov):
  Txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [C] thiab qhov tsis zoo (–) ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [COM]. Cov zis tuaj yeem siv los muab lub zog rau daim npav nyeem ntawv, keypads thiab lwm yam.
  Nco tseg: Thaum xaim rau cov khoom siv hluav taws xob txwv tsis pub siv lub khob tawm cais los ntawm ib qho siv rau cov tsis muaj hluav taws xob txwv.
Input trigger xaiv (Fig. 1, pg. 5):
- Nquag Qhib [NO] input trigger:
  Cov khoom siv 1-4 yog qhib los ntawm ib txwm qhib lossis qhib cov khoom ntim khoom ntim khoom. Txuas cov khoom siv (daim npav nyeem ntawv, keypads, thov kom tawm cov nyees khawm thiab lwm yam) rau cov terminals cim [IN] thiab [GND].
- Qhib Collector Sink inputs:
  Txuas lub vaj huam sib luag tswj kev nkag thiab qhib cov khoom tso tawm mus rau lub davhlau ya nyob twg cim [IN] thiab qhov sib xws (tsis zoo) rau lub davhlau ya nyob twg cim [GND].
Kev xaiv hluav taws kub tswb Interface (Fig. 3 txog 7, pg. 6):
Ib txwm kaw [NC], ib txwm qhib [NO] cov tswv yim lossis polarity reversal input los ntawm FACP signaling circuit yuav ua rau cov khoom siv tau xaiv. Txhawm rau ua kom FACP Disconnect rau qhov tso zis tig qhov sib txuas [SW1- SW4] OFF. Txhawm rau lov tes taw FACP disconnect rau qhov tso zis tig qhov sib txuas [SW1-SW4] ON.
- Nquag Qhib [NO] input:
  Rau qhov tsis-latching hook-up saib daim duab 4, pg. 6. Rau latching hook-up saib daim duab 5, pg. 7.
- Nquag Kaw [NC] input:
  Rau qhov tsis-latching hook-up saib daim duab 6, pg. 7. Rau latching hook-up saib daim duab 7, pg. 7.
- FACP Signaling Circuit Court input trigger:
  Txuas qhov zoo (+) thiab qhov tsis zoo (–) los ntawm FACP signaling circuit output rau cov terminals cim [+ INP –]. Txuas lub FACP EOL mus rau lub davhlau ya nyob twg cim [+ RET –] (polarity yog hais txog lub tswb). Jumper J3 yuav tsum tau txiav (Fig. 3, pg. 6).
FACP Qhuav daim ntawv "C" tso zis (Fig. 1a, pg. 5):
Txuas cov khoom siv uas xav tau los ua los ntawm chav tsev qhov kev tiv tauj qhuav rau cov terminals cim [NO] thiab [C] FACP rau ib txwm qhib tawm lossis cov terminals cim [NC] thiab [C] FACP rau ib txwm kaw cov zis.
Installation ntawm tamper hloov (Tsis suav):
Mount UL Listed tamper hloov (Altronix Model TS112 los yog sib npaug) nyob rau sab saum toj ntawm lub enclosure. Swb lub tamper hloov bracket mus rau ntawm ntug ntawm lub kaw lus kwv yees li 2 "los ntawm sab xis. Txuas tamper hloov xaim mus rau Listed Access Control Vaj Huam Sib Luag input los yog cov khoom tsim nyog UL Listed reporting device kom qhib lub tswb ceeb toom thaum lub qhov rooj qhib.

Kev tu

Chav tsev yuav tsum tau sim tsawg kawg ib xyoos ib zaug rau kev ua haujlwm kom raug. Lub voltage ntawm txhua qhov tso zis yuav tsum tau sim rau ob qho tib si ua thiab tsis yog lub xeev thiab kev ua haujlwm ntawm FACP interface yuav tsum tau simulated.

LED Diagnostics

LED	ON	OFF
LED 1 - LED 4 (Liab)	Output relay(s) energized.	Output relay(s) de-energized.
TRG (ntsuab)	FACP input triggered (lub tswb mob).	FACP li qub (tsis yog lub tswb).

Terminal Identification Table

Terminal lus dab neeg	Function/Kev piav qhia
- Lub zog +	12VDC rau 24VDC tawm tswv yim los ntawm UL Listed Access Control Fais Fab.
- Tswj +	Cov terminals no tuaj yeem txuas mus rau ib qho kev sib cais, UL Listed Access Control Power Supply los muab kev ua haujlwm cais tawm rau ACM4E / ACM4CBE (Jumpers J1 thiab J2 yuav tsum raug tshem tawm).
TIG INPUT 1 – INPU 4 IN, GND	Los ntawm ib txwm qhib thiab / lossis qhib cov dab dej sib sau ua rau cov khoom nkag (thov kom tawm khawm, tawm PIRs, thiab lwm yam).
OUTPUT 1 - OUTPUT 4 NC, C, NO, COM	12 mus rau 24 volts AC / DC trigger controlled outputs: Fail-Safe [NC positive (+) & COM Negative (–)], Fail-Secure [NO positive (+) & COM Negative (–)], Cov khoom siv txhawb nqa [C zoo (+) & COM Negative (–)] (Thaum siv cov khoom siv hluav taws xob AC polarity yuav tsum tsis txhob saib), NC, C, TSIS tau dhau los ua daim ntawv "C" 5A 24VAC / VDC rated qhuav outputs thaum fuses raug tshem tawm (ACM4E). Cov kev sib cuag tau pom nyob rau hauv lub xeev uas tsis yog-triggered.
FACP INTERFACE T, + Kev nkag -	Hluav taws kub tswb Interface ua rau cov tswv yim los ntawm FACP. Cov khoom siv hluav taws xob tuaj yeem qhib tau ib txwm, feem ntau kaw los ntawm FACP tso zis hluav taws xob (Daim duab 3 txog 7, pg. 6-7).
FACP INTERFACE NC, C, NO	Daim ntawv "C" relay hu rau @ 1A / 28VDC rau kev ceeb toom ceeb toom. (Cov zis no tsis tau soj ntsuam los ntawm UL).

Hom Daim Ntawv Thov

Khaws cov kab hluav taws xob txwv tsis pub sib cais los ntawm tsis muaj hluav taws xob txwv. Siv qhov tsawg kawg nkaus 0.25 "qhov nrug.

CEEB TOOM:
Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob poob siab, tsis txhob tso lub tsev los nag lossis dej noo. Hloov fuses (ACM4E nkaus xwb) nrog tib hom thiab ntsuas, 3A / 32V.

Daim duab sib dhos

Daim duab 2

Optional hook-up siv ob (2) cais fais fab mov inputs:

Daim duab 3
Polarity reversal input los ntawm FACP signaling circuit output (polarity yog hais txog nyob rau hauv lub tswb): (Cov zis no tsis tau soj ntsuam los ntawm UL).

Daim duab 4
Nquag Qhib - Tsis-Latching FACP txhais cov tswv yim:

Daim duab 5
Nquag Qhib FACP Latching trigger input nrog pib dua: (Cov zis no tsis tau raug soj ntsuam los ntawm UL).

Daim duab 6
Nquag kaw - Tsis-Latching FACP ua rau cov tswv yim:

Daim duab 7
Nquag Kaw - Latching FACP ua rau cov tswv yim nrog rov pib dua (Cov zis no tsis tau raug tshuaj xyuas los ntawm UL):

Enclosure Dimensions (H x W x D kwv yees)

8.5 "x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm)

Altronix tsis yog lub luag haujlwm rau txhua qhov yuam kev typographical.
140 58th Street, Brooklyn, New York 11220 USA | xov tooj: 718-567-8181 Ib | fax: 718-567-9056 Ib webqhov chaw: www.altronix.com | e-mail: yog info@altronix.com | Lub neej Warranty
IIACM4E/ACM4CBE F25U.

Cov ntaub ntawv / Cov ntaub ntawv

Altronix ACM4E Series ACM4CBE Access Power Controllers [ua pdf] Daim ntawv qhia kev teeb tsa
ACM4E Series, ACM4CBE, Access Power Controllers, ACM4E Series ACM4CBE Access Power Controllers

Cov ntaub ntawv

Cov neeg siv phau ntawv

Altronix ACM4E Series ACM4CBE Access Power Controllers

Tshajview