Altronix ACM4E Series ACM4CBE Jagoran Shigar Masu Sarrafa Wuta

Altronix ACM4E da ACM4CBE Masu Sarrafa Wutar Lantarki suna canza ɗaya (1) 12 zuwa shigarwar 24-volt AC ko DC zuwa cikin guda huɗu (4) waɗanda ke sarrafa kansu ko abubuwan da aka kariyar PTC. Ana iya juyar da waɗannan fitinun wutar lantarki zuwa lambobi masu busassun “C” (ACM4E kawai). Ana kunna fitarwa ta hanyar buɗaɗɗen mai tattarawa ko kuma buɗe (NO) busasshen shigar da shigar da busassun bayanai daga Tsarin Gudanarwa, Card Reader, faifan maɓalli, Maɓallin turawa, PIR, da sauransu. Raka'a za su tura wutar lantarki zuwa na'urorin sarrafa kayan aiki iri-iri ciki har da Mag. Makullai, Yajin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Fitarwa za su yi aiki a cikin yanayin rashin aminci da/ko gaza-aminci. An tsara raka'a don samun ƙarfi ta hanyar tushen wutar lantarki guda ɗaya wanda zai samar da wutar lantarki ga duka aikin hukumar da na'urorin kulle, ko biyu (2) hanyoyin wutar lantarki masu zaman kansu gaba ɗaya, ɗaya (1) samar da wutar lantarki don aikin hukumar da ɗayan don kulle/na'urorin haɗi. iko. Fuskar FACP tana ba da damar Ƙaddamar Gaggawa, da Kula da Ƙararrawa, ko ana iya amfani da su don jawo wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na takwas (8).

ACM4E da ACM4CBE Tsarin Tunanin Kanfigareshan

Lokacin da aka yi amfani da shi tare da Ƙarfin Ƙarfin Ƙarfi na Class 2.
ANSI/UL 294 7th Ed. Matakan Ayyukan Gudanar da Samun damar: Hare-Hare-Hare-Hare-I; Jimiri - IV; Tsaron layi - I; Tsayawar Wuta - I.

Ƙayyadaddun bayanai

12 zuwa 24-volt AC ko aiki na DC (ba a buƙatar saitin). (0.6A @ 12 volt, 0.3A @ 24 volt amfani na yanzu tare da duk abin da aka ƙarfafa).
Zaɓuɓɓukan shigar da wutar lantarki:
- Ɗaya (1) shigar da wutar lantarki gama gari (allon allo da ikon kullewa).
- Biyu (2) keɓaɓɓen abubuwan shigar wuta (ɗaya (1) don wutar allo da ɗaya (1) don ikon kulle/hardware).

Hudu (4) Tsarin Gudanar da Samun damar shigar da abubuwan shiga:
- Abubuwan shigarwa huɗu (4) yawanci buɗewa (NO).
- Hudu (4) buɗaɗɗen abubuwan shigar ruwa mai tarawa.
- Duk wani hade na sama.

Hudu (4) abubuwan sarrafawa masu zaman kansu:
- Hudu (4) Rashin-Lafiya da/ko Ƙarfin-Tsarin abubuwan samar da wutar lantarki.
- Hudu (4) busassun sigar “C” 5A rated relay results (ACM4E kawai).
- Duk wani haɗuwa na sama (ACM4E kawai).

Hudu (4) na'urorin wutar lantarki na taimako (ba a kunna ba).
Ƙimar fitarwa:
- ACM4E: Fuses an kimanta 3.0A kowanne.
- ACM4CBE: Ana kimanta PTCs 2.5A kowanne.

An ƙididdige babban fuse a 10A.
Lura: Jimlar fitarwa na halin yanzu ana ƙaddara ta hanyar samar da wutar lantarki, kada ya wuce iyakar jimlar 10A.
Jajayen LED suna nuna abubuwan da aka kunna (masu kuzarin relays).

Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8). Zaɓuɓɓukan shigar da ƙararrawar wuta:
- Buɗewa ta al'ada (NO) ko kuma rufe (NC) busasshen shigar da lamba.
- Shigar da juyar da polarity daga da'irar siginar FACP.
FACP fitarwa fitarwa (form "C" lamba lamba @ 1A 28VDC, ba UL kimanta).

Koren LED yana nuna lokacin da aka jawo cire haɗin FACP.
Tubalan tasha masu cirewa suna sauƙaƙe sauƙin shigarwa.

Ƙimar Ƙirar (H x W x D): 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).

Umarnin Shigarwa

Dutsen naúrar a wurin da ake so. Yi alama da ramuka a bango don yin layi tare da manyan maɓallan maɓalli guda biyu a cikin shingen. Shigar da manyan haɗe-haɗe biyu da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya ramukan maɓalli na sama sama da sukurori biyu na sama; daraja da aminci. Alama matsayi na ƙananan ramuka uku. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure biyu. Sanya ramukan maɓalli na sama sama biyu na sama. Shigar da ƙananan sukurori biyu kuma tabbatar da ƙarfafa duk screws (Ƙararren Ƙararren, shafi 7).
A hankali sakeview:
- LED Diagnostics
- Teburin Gano Tasha
- Tsarin aikace-aikace na yau da kullun
- Zane-zane na ƙugiya
Shigar da wutar lantarki:
Ana iya amfani da na'urorin da wutar lantarki guda ɗaya (1) wanda zai samar da wutar lantarki ga duka ayyukan hukumar da na'urorin kulle ko biyu (2) kayan wuta daban-daban, ɗaya (1) don samar da wutar lantarki don aikin hukumar da ɗayan don samar da wutar lantarki. don na'urorin kullewa da/ko kayan sarrafa damar shiga.
Lura: Ƙarfin shigarwa na iya zama ko dai 12 zuwa 24 volts AC ko DC (0.4A @ 12 volt, 0.2A @ 24 volt amfani na yanzu tare da duk ƙarfin relays).
- Shigar da wutar lantarki guda ɗaya:
  Idan za'a kunna naúrar da na'urorin kulle ta amfani da Wutar Wutar Lantarki ta Lissafi ɗaya, haɗa abin fitarwa (12 zuwa 24 volts AC ko DC) zuwa tashoshi masu alamar [- Control +].
- Abubuwan shigar da wutar lantarki guda biyu (Hoto 1):
  Lokacin da ake son amfani da Kayayyakin Wutar Lantarki na Ikon Samun Lissafi guda biyu, masu tsalle-tsalle J1 da J2 (wanda ke gefen hagu na tashoshin wutar lantarki) dole ne a yanke. Haɗa wuta don naúrar zuwa tashoshi masu alama [- Control +] kuma haɗa wuta don na'urorin kulle zuwa tashoshi masu alama [- Power +].
  Lura: Lokacin amfani da Lissafin Lissafin Ikon Samun Ƙarfin Kayayyakin Wutar Lantarki dole ne a kiyaye polarity. Lokacin amfani da Jerin AC Lissafta Ikon Samar da Wutar Kayan Wuta ba buƙatar kiyaye polarity ba.
  Lura: Don yarda da UL dole ne kayan wutar lantarki su kasance UL An jera su don Tsarin Gudanar da Samun dama da na'urorin haɗi.
Zaɓuɓɓukan fitarwa (Hoto 1, shafi 5):
ACM4E za ta samar da ko dai guda huɗu (4) da aka canza wutar lantarki, huɗu (4) busassun nau'in fitowar "C", ko duk wani haɗuwa na biyun da aka canza da kuma samar da abubuwan "C", da kuma nau'ikan wutar lantarki guda huɗu (4) waɗanda ba a canza su ba. ACM4CBE za ta samar da wutar lantarki guda huɗu (4) da aka canza ko kuma huɗu (4) waɗanda ba a kunna wutar lantarki ba.
- Abubuwan da aka Canja Wuta:
  Haɗa madaidaicin shigarwar (-) na na'urar da ake kunna wuta zuwa tasha mai alama [COM]. Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC]. Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tasha mai alama [NO].
- Form "C" abubuwan fitarwa (ACM4E):
  Lokacin da ake son fitar da nau'i na "C" dole ne a cire fuse mai dacewa (1-4). Haɗa korau (-) na wutar lantarki kai tsaye zuwa na'urar kullewa. Haɗa tabbataccen (+) na wutar lantarki zuwa tasha mai alama [C]. Don Rashin-Safe aiki haɗa tabbataccen (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC]. Don Ƙarfafa Amintaccen aiki haɗa tabbataccen (+) na na'urar da aka kunna zuwa tashar da aka yiwa alama [NO].
- Fitowar wutar lantarki (ba a kunna):
  Haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tasha mai alama [C] da mummunan (-) na na'urar da ake kunna wutar zuwa tasha mai alama [COM]. Ana iya amfani da fitarwa don samar da wuta ga masu karanta katin, maɓalli da sauransu.
  Lura: Lokacin da wayoyi don iyakantaccen kayan aiki yana amfani da ƙwanƙwasa daban da wanda aka yi amfani da shi don wayoyi marasa iyaka.
Zaɓuɓɓukan shigar da ƙara (Hoto 1, shafi 5):
- Kullum Buɗe [NO] shigar da fararwa:
  Ana kunna abubuwan shigarwa 1-4 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa. Haɗa na'urori (masu karanta katin, faifan maɓalli, buƙatun fita maɓallan da sauransu) zuwa tashoshi masu alama [IN] da [GND].
- Buɗe abubuwan shigar da Mai Tari:
  Haɗa kwamitin kula da shiga da buɗe fitarwa mai tara zuwa tashar da aka yiwa alama [IN] da na gama gari (mara kyau) zuwa tasha mai alama [GND].
Zaɓuɓɓukan Interface Ƙararrawar Wuta (Figs. 3 zuwa 7, shafi 6):
Rufe [NC], yawanci buɗe [NO] shigarwar ko shigar da juzu'i na polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa. Don kunna cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1- SW4] KASHE. Don kashe cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW4] ON.
- Kullum Buɗe shigarwar [NO]:
  Don ƙugiya mara latch duba hoto 4, shafi. 6. Don latch ƙugiya duba hoto 5, shafi. 7.
- Shigar da aka saba rufe [NC]:
  Don ƙugiya mara latch duba hoto 6, shafi. 7. Don latch ƙugiya duba hoto 7, shafi. 7.
- Shigar da siginar siginar FACP:
  Haɗa tabbataccen (+) da korau (-) daga fitowar siginar FACP zuwa tashoshi masu alamar [+ INP -]. Haɗa FACP EOL zuwa tashoshi masu alama [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa). Jumper J3 dole ne a yanke (Fig. 3, shafi na 6).
FACP Dry form “C” fitarwa (Hoto 1a, shafi 5):
Haɗa na'urar da ake so don haifar da busasshiyar fitowar lamba ta naúrar zuwa tashoshi masu alamar [NO] da [C] FACP don buɗe fitarwa ta al'ada ko tashoshi masu alamar [NC] da [C] FACP don fitowar da aka rufe.
Shigar da tamper canza (Ba a Haɗe):
Dutsen UL Jerin tamper canza (Altronix Model TS112 ko makamancinsa) a saman shingen. Zamar da tampmadaidaicin madaidaicin madaidaicin zuwa gefen shingen kusan 2” daga gefen dama. Haɗa tampcanza wayoyi zuwa shigarwar da aka jera Control Panel ko na'urar da aka jera UL da ta dace don kunna siginar ƙararrawa lokacin da ƙofar shinge ke buɗe.

Kulawa

Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don gudanar da aikin da ya dace. Voltage akan kowane kayan aiki dole ne a gwada shi don jihohi masu faɗakarwa da waɗanda ba masu tayar da hankali ba kuma dole ne a kwaikwayi ayyukan FACP.

LED Diagnostics

LED	ON	KASHE
LED 1 - LED 4 (ja)	Relay(s) na fitar da kuzari.	Relay(s) na fitar da kuzari.
TRG (Green)	An kunna shigar da FACP (yanayin ƙararrawa).	FACP na al'ada (yanayin rashin ƙararrawa).

Teburin Gano Tasha

Labarin Ƙarshe	Aiki/Bayyana
- Power +	Shigar da 12VDC zuwa 24VDC daga UL Listed Control Power Supply.
– Sarrafa +	Ana iya haɗa waɗannan tashoshi zuwa wani keɓan, UL Listed Control Power Supply don samar da keɓantaccen ikon aiki don ACM4E/ACM4CBE (dole ne a cire masu tsalle J1 da J2).
FADAKARWA INPUT 1 - INPUT 4 IN, GND	Daga budewa da/ko buɗaɗɗen abubuwan shigar da ke jawo mai tarawa (buƙatun fita maɓallan, fita PIRs, da sauransu).
FITOWA TA 1 - FITOWA TA 4 NC, C, NO, COM	12 zuwa 24 volts AC/DC yana jawo abubuwan sarrafawa masu sarrafawa: Rashin-Safe [NC tabbatacce (+) & COM Negative (-)], Rashin-Secure [NO tabbatacce (+) & COM Korau (-)], Fitowar taimako [C tabbatacce (+) & COM Korau (-)] (Lokacin da ake amfani da wutar lantarki na AC ba a buƙatar kiyaye polarity), NC, C, NO zama nau'i "C" 5A 24VAC/VDC da aka ƙididdige abubuwan busassun lokacin da aka cire fis (ACM4E). Lambobin sadarwa suna nunawa a cikin yanayin da ba a kunna ba.
FACP INTERFACE T, + INPUT -	Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci ana rufe su daga da'irar fitarwa ta FACP (Hoto 3 zuwa 7, shafi 6-7).
FACP INTERFACE NC, C, NO	Form "C" tuntuɓi mai lamba @ 1A/28VDC don rahoton ƙararrawa. (UL ba ya kimanta wannan fitarwa).

Tsarin aikace-aikace na yau da kullun

Kiyaye iyakataccen wayoyi daban da mara iyaka. Yi amfani da tazara mafi ƙarancin 0.25 inci.

GARGADI:
Don rage haɗarin gobara ko girgizar lantarki, kar a bijirar da naúrar ga ruwan sama ko danshi. Sauya fis (ACM4E kawai) tare da nau'in iri ɗaya da ƙima, 3A/32V.

Zane-zane na ƙugiya

Hoto 2

Ƙunƙwalwar zaɓi ta amfani da abubuwan shigar wutar lantarki guda biyu (2):

Hoto 3
Shigar da juyar da polarity daga fitowar sigina na FACP (ana yin la'akari da polarity a yanayin ƙararrawa): (UL ba ya kimanta wannan fitarwa).

Hoto 4
Buɗewa Kullum - shigarwar FACP mara-lalacewa:

Hoto 5
Yawanci Buɗe shigarwar faɗakarwar FACP Latching tare da sake saiti: (UL ba ta kimanta wannan fitarwa ba).

Hoto 6
Kullum Rufewa - Ba-Latching FACP shigar da fararwa:

Hoto 7
Kullum Rufewa - Latching FACP yana haifar da shigarwa tare da sake saiti (UL ba ya kimanta wannan fitarwa):

Girman Rukunin (H x W x D kimanin)

8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm)

Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Garanti na rayuwa
IIACM4E/ACM4CBE F25U.

Takardu / Albarkatu

Altronix ACM4E Series ACM4CBE Masu Sarrafa Wuta [pdf] Jagoran Shigarwa
Jerin ACM4E, ACM4CBE, Masu Gudanar da Wuta, ACM4E Series ACM4CBE Masu Kula da Wutar Lantarki

Magana

Manual mai amfani

Altronix ACM4E Series ACM4CBE Masu Sarrafa Wuta

Ƙarsheview