Lisebelisoa tsa AEMC MN103 AC Hona Joale Probe
MOEKETSI MOSEBETSI
Setšoantšo sa MN103
Mohlala oa MN103 (Cat. #1031.02) o lekanya ho lutla ha maqhubu a hona joale le a tlase ho tloha ho 1 mA, 'me e lekanya hona joale ho 5 A secondaries. Probe ena ea hajoale e fana ka bokhoni ba ho lekanya ba AC hona joale ho lisebelisoa tse nang le lisebelisoa tsa mV. Model MN103 e fana ka tataiso ea 5 ft e nang le polokeho ea 4 mm banana plug.
TLHOKOMELO
Litemoso tsena tsa polokeho li fanoa ho netefatsa polokeho ea basebetsi le ts'ebetso e nepahetseng ea sesebelisoa.
- Bala bukana ea litaelo ka botlalo 'me u latele lintlha tsohle tsa polokeho pele u leka ho sebelisa kapa ho sebeletsa sesebelisoa sena.
- E-ba hlokolosi mabapi le potoloho efe kapa efe: Ho ka etsahala hore e phahametagmaqhubu le maqhubu a teng 'me a ka baka kotsi e tšosang.
- Bala karolo ea Litlhaloso tsa Tšireletso pele u sebelisa probe ea hajoale. Le ka mohla u se ke ua feta palo e kholotaglintlha tse fanoeng.
- Tšireletseho ke boikarabello ba motho ea sebetsang.
- KAMEHLA hokela probe ea hajoale ho sesebelisoa sa ponts'o pele ho clampho etsa lipatlisiso holim'a sample ntse le lekoa.
- LEkola lisebelisoa, probe, probe cable, le li-terminals pele o sebelisoa. Tlosa likarolo leha e le life tse nang le bothata hang-hang.
- LE KA mohla u se ke ua sebelisa probe ea hona joale ho li-conductors tsa motlakase tse behiloeng ka holimo ho 250 V. E-ba hlokolosi haholo ha u le cl.ampho pota-pota li-conductor tse se nang letho kapa maballo a libese.
LITŠOANTŠISO TSA MOHLASE
Letšoao lena le bolela hore probe ea hajoale e sirelelitsoe ke insulation e habeli kapa e matlafalitsoeng. Sebelisa feela likarolo tse ncha tse boletsoeng ke feme ha u sebeletsa sesebelisoa.
Letšoao lena le bolela TLHOKOMELISO! mme o kopa hore mosebelisi a bue ka bukana ea mosebelisi pele a sebelisa sesebelisoa.
Letšoao lena le bolela hore ona ke mofuta oa sensor ea hona joale ea A le hore kopo e haufi le ho tlosoa ho li-conductor tsa HAZARDOUS LIVE e lumelloa.
TLHALOSO EA MEKHATLO EA LITEKISO (KATSI)
CAT IV: Bakeng sa litekanyo tse etsoang phepelong ea mantlha ea motlakase (<1000 V), joalo ka lisebelisoa tsa mantlha tsa ts'ireletso ea overcurrent, li-ripple control unit, kapa limithara.
CAT III: Bakeng sa litekanyo etsoa mohahong tlhomamiso boemong kabo, tse kang thepa hardwired ka tlhomamiso e tsitsitseng kapa breakers potoloho.
CAT II: Bakeng sa litekanyo tse etsoang lipotolohong tse hokahaneng ka kotloloho le sistimi ea kabo ea motlakase, joalo ka litekanyo tsa lisebelisoa tsa ntlo kapa lisebelisoa tse nkehang.
HO FUMANA MOROBE
Ha u fumana thomello ea hau, etsa bonnete ba hore litaba tse ka hare li lumellana le lenane la ho paka. Tsebisa morekisi oa hau ka lintho tse sieo. Haeba thepa e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa le ho tsebisa mofani oa hau ho fana ka tlhaloso e qaqileng ea tšenyo leha e le efe.
LIEKETSENG LIEKETSENG
Model MN103 e tsamaisana le voltmeter efe kapa efe ea AC, multimeter, kapa matla a mangtagsesebediswa sa ho metha sa e se nang le kenyeletso ya 100 kΩ kapa ho feta. Ho fihlela bonnete bo boletsoeng, sebelisa MN103 e nang le voltmeter e nepahetseng ea 1 % kapa ho feta.
TLHOKOMELISO EA HAjoale - MN103 THAKO
LIEKETSENG MOTLATSI
- Boemo ba Hona Joale (tlase):
10 A: 1 mA ho isa ho 10 AAC - Lets'oao la Tlhahiso:
1 mV AC/mAAC (10 V @ 10 A) - Ho nepahala*:
Ho nepahala: 1 mA ho 10 AAC
(45 ho 65) Hz: ± 3 % Ho bala ± 1 mA - Boemo ba Hona Joale (holimo):
100 A: (1 ho isa ho 100) AAC - Lets'oao la Tlhahiso:
1 mV AC/AAC
(100 mV @ 100 A) - Tšitiso ea Meroalo:
100 KΩ mets - Ho nepahala*:
Ho nepahala: 1 A ho 100 AAC
(45 ho isa ho 65) Hz: ±2 % Ho bala ±0.1 A
> (65 ho isa ho 500) Hz: -2, +3 % Ho bala ±0.1 A
*Maemo a litšupiso: 23 °C ±3 °K,
(20 ho 70)% RH, matla a khoheli a kantle <40 A/m, ha a na karolo ea DC, ha ho na mokhanni ea jereng ea kantle, tlhahlobo ea s.ample centered. Khokahano ea ho jara 1 MΩ. - Marang-rang:
(45 ho isa ho 500) Hz
Sebetsa Voltage: 250 VAC
Mokhoa o Tloaelehileng Moqtage: 250 VAC - Tlhahlobo ea Calibration:
E khothaletsoa hang ka selemo
LIEKETSENG MOCHA
- Thempereichara ea ho sebetsa:
(14 ho 122) °F (-10 ho 50) °C
Mocheso oa polokelo:
(40 ho 176) °F (-40 ho 80) °C - Maximum Cable Diameter:
0.47 ho Ø max. (12 mm) - Boholo:
(1.26 x 4.53 x 0.87) ho (32 x 115 x 22) mm - Boima ba 'mele:
5.6 oz (160 g) - Lintho tse entsoeng ka polycarbonate:
Tšoara: 10% Fiberglass e qosoa polycarbonate
UL 94 V0 - Sephetho:
MN103: E kentsoeng habeli / e matlafalitsoeng
5 ft (1.5 m) lead e nang le polokeho ea 4 mm banana polaka
TS'IRELETSO TS'OANE
Motlakase (IEC 414):
250 V sebetsa voltage
250 V max mokhoa o tloaelehileng pakeng tsa tlhahiso le fatše
3 kV 50/60 Hz dielectric bakeng sa 1 min
TAELO TSEBISO
AC Current Probe MN103……Cat #1031.02
(E khaotsoe - Ho nkela sebaka ke Katse. 2129.19
AC Current Probe Model MN05)
Lisebelisoa:
Adapter ea plug ea Banana
(ho polaka e sa kengoang) …………Katse #1017.45
TS'EBETSO
Ho etsa Litekanyo ka AC Current Probe Model MN103
- Hokela lead lead e ntšo ea probe ea hajoale ho "tloaelehileng" le lead lead e khubelu ho AC voltagho DMM ea hau kapa molumo o mongtagsesebelisoa sa ho metha. Lethathamo la "10 A" le na le letšoao la tlhahiso ea 1 mV/mA AC. Sena se bolela hore bakeng sa 10 AAC ho conductor ho pota-pota moo probe e leng clamped, 10 VAC e tla tsoa ho probe e lebisa ho DMM kapa sesebelisoa sa hau. Lethathamo la "100 A" le na le letšoao la tlhahiso ea 1 mV/AAC. Sena se bolela hore bakeng sa 100 AAC ho conductor ho pota-pota moo probe e leng clamped, 100 mVAC e tla tsoa ho probe e lebisa ho DMM kapa sesebelisoa sa hau. Khetha sebaka ho DMM ea hau kapa sesebelisoa se lumellanang hantle le se lekantsoeng hajoale. Haeba boholo ba hona joale bo sa tsejoe, qala ka sebaka se phahameng ka ho fetisisa pele 'me u sebetse fatše ho fihlela moeli o nepahetseng le qeto e fihletsoe. Clamp mochochisi o potileng mokhanni. Nka 'malo ho metara' me u e atise ka lets'oao la tlhahiso le sebelisetsoang ho fumana motlakase o lekantsoeng. (mohlala, haeba metara e bala 100.5 mV [range 1 mV/mA], joale ea hajoale e lekana le 100.5 mAAC). Unclamp probe ho tsoa ho conductor pele o e hakolla ho DMM kapa sesebelisoa sa hau.
- Bakeng sa ho nepahala ho hoholo, qoba ho ba haufi ha li-conductors tse ling tse ka bakang lerata ha ho khoneha.
Malebela a ho Etsa Litekanyo tse Nepahetseng
- Ha u sebelisa probe ea hona joale e nang le meter, ke habohlokoa ho khetha mefuta e fanang ka tharollo e molemo ka ho fetisisa. Ho hloleha ho etsa sena ho ka baka liphoso tsa tekanyo.
- Etsa bonnete ba hore libaka tse kopanyang mohlahare oa probe ha li na lerōle le tšilafalo. Litšila li baka likheo tsa moea pakeng tsa mehlahare, ho eketsa phetoho ea mohato pakeng tsa mathomo le a bobeli. E bohlokoa haholo bakeng sa ho lekanya matla.
TLHOKOMELO
Tlhokomediso
- Bakeng sa tlhokomelo, sebelisa feela likarolo tse ncha tse ncha.
- Ho qoba ho tsukutloa ke motlakase, seke oa leka ho etsa ts'ebeletso efe kapa efe sesebelisoa ntle le haeba o tšoaneleha ho etsa joalo.
- Ho qoba ts'oaetso ea motlakase le / kapa tšenyo ea sesebelisoa, u se ke ua lumella metsi kapa baemeli ba tsoang linaheng tse ling ho kopana le probe.
Ho hloekisa
Ho netefatsa tshebetso e ntlafetseng, ho bohlokwa ho boloka sebaka sa ho nyalana ha mohlahare se hlwekile ka dinako tsohle. Ho hloleha ho etsa joalo ho ka baka phoso ho bala. Ho hloekisa mehlahare ea probe, sebelisa pampiri ea lehlabathe e ntle haholo (e ntle 600) ho qoba ho phunya mohlahare, ebe u hloekisa ka bonolo ka lesela le bonolo, le tlotsitsoeng ka oli.
TS'OATSO E TS'OA
O tlameha ho iteanya le Setsi sa rona sa Tshebeletso bakeng sa nomoro ya Tumello ya Tshebeletso ya Bareki (CSA#). Sena se tla etsa bonnete ba hore, ha sesebelisoa sa hau se fihla, se tla lateloa le ho sebetsoa hang-hang. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa.
Sekepe ho ea: Chauvin Arnoux®, Inc. dba AEMC® Instruments
15 Faraday Drive
Dover, NH 03820 USA
Mohala: 800-945-2362 (Ext. 360)
603-749-6434 (Ext. 360)
Fax: 603-742-2346
E-mail: repair@aemc.com
(Kapa ikopanye le mophatlalatsi oa hau ea lumelletsoeng)
HLOKOMELA: O tlameha ho fumana CSA # pele o khutlisa sesebelisoa leha e le sefe.
THUSO LE THEKISO
Haeba u na le mathata afe kapa afe a tekheniki, kapa u hloka thuso efe kapa efe mabapi le ts'ebetso e nepahetseng kapa ts'ebeliso ea sesebelisoa sa hau, ka kopo letsetsa, e-mail kapa fekse sehlopha sa rona sa ts'ehetso ea tekheniki:
Ikopanye le: Chauvin Arnoux®, Inc. dba AEMC® Lisebelisoa
Mohala: 800-945-2362 (Ext. 351) kapa 603-749-6434 (Ext. 351)
Fax: 603-742-2346 • E-mail: techsupport@aemc.com
TIISETSO MOEKETSI
Probe ea hajoale e netefalitsoe ho mong'a eona nako ea lilemo tse peli ho tloha ka letsatsi leo e rekiloeng ka lona khahlano le liphoso tse entsoeng. Tiisetso ena e lekanyelitsoeng e fanoa ke AEMC® Instruments, eseng ke morekisi eo e rekiloeng ho eena. Tiisetso ena ha e na letho haeba yuniti e bile tampe entsoe, e hlekefelitsoe, kapa haeba sekoli se amana le tšebeletso e sa etsoang ke AEMC® Instruments.
Tšireletso e felletseng ea waranti le ngoliso ea sehlahisoa e fumaneha ho rona websebaka ho:
www.aemc.com/warranty.html.
Ka kopo, hatisa Boitsebiso ba Tšireletso ea Tiisetso ea Marang-rang bakeng sa lirekoto tsa hau.
LBH:
Q: ke lisebelisoa life tsa Model MN103?
A: Model MN103 e lumellana le voltmeter efe kapa efe ea AC, multimeter, kapa matla a mang.tagsesebediswa sa ho metha se nang le kenyeletso ya 100 k kapa ho feta.
Q: ke eng kgothaletswa calibration frequency bakeng sa Model MN103?
A: Ho khothaletsoa ho hlahloba litekanyo hang ka selemo ho netefatsa litekanyo tse nepahetseng.
P: Ke lokela ho etsa eng haeba thepa ea ka e senyehile kapa e le sieo?
A: Haeba thepa ea hau e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa le ho tsebisa mofani oa hau ho fana ka tlhaloso e qaqileng ea tšenyo leha e le efe. Tsebisa morekisi oa hau ka lintho tse sieo hape.
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa AEMC MN103 AC Hona Joale Probe [pdf] Bukana ea Mosebelisi Phatlalatso ea hajoale ea MN103 AC, MN103, Probe ea Hona Joale ea AC, Phatlalatso ea Hona Joale, Patlisiso |
