mokhoa oa ho ithuta oa adafruit
CYBERDECK Bonnet le HAT bakeng sa Raspberry Pi 400
E entsoe ke Kattni Rembor

E qetetse ho nchafatsoa ka 2021-10-20 01:45:58 PM EDT 

Fetileview

Hello keyboard cowboys, na le palama tlhahisoleseling ka Pi 400? U batla pontšo e ntle ea lihlooho, kapa mohlomong u hloka ho hokela NeoPixel wetware…?

Bahlabani ba marang-rang, mamelang holimo mona! Re na le lisebelisoa tse ling tse sa tsoakoang tsa matsatsi a zero tseo re sa tsoa li qoela. Hona joale u ka khona ho qhekella likhoutu, 'me ua ngola mangolo ka mokhoa, ka lebaka la CYBERDECK HAT le Bonnet bakeng sa Raspberry Pi 400 ho tloha Adafruit zaibatsu.

Ho lokile, re sa tsoa hokela li-megabyte tse 12 tsa pheleu le hlooho e 'ngoe ea socket ho tloha tlelabong ea bosholu ba ka tlas'a lefatše haufi le sebaka sa puisano, 'me ke ntlafatso e kholo ho boto ea rona ea extender board - joale u ka kenya Pi bonnet kapa HAT ka morao ho ntlo ea hau. Lehata la Pi 400 ka lehlakoreng le pholileng, le loketseng ho holisa mokato oa hau!

Hape re u fa likhokahanyo tse peli tsa STEMMA (JST 3-PH) ho GPIO #18 le #13, le li-plug tse peli tsa STEMMA QT I2C, bakeng sa lintlafatso tse ling (likhoele tse rekisoang ka thoko (https://adafru.it/JRA))

Ena ke lisebelisoa tse tšoanang le tseo Kevin Mitnick a li sebelisitseng ha a ne a hlahisa Sidewinder! Ho lokile, mohlomong ha ho joalo, empa e tla u tlohella hore u thehe mokato o ikemetseng oa Kali ka ho hokela e 'ngoe ea li-Bonnets kapa li-HAT tsa rona tse ngata.
E tla e se e kopane ka botlalo le ho lekoa kahoo ha ho hlokahale hore u etse letho haese ho e hokela. E sebetsa hantle haholo ka komporo ea Pi 400.

Litšoantšo tsa demo li bonts'a Bonnet ka e 'ngoe ea libone tsa rona tsa 128 × 32 OLED e kentsoeng (https://adafru.it/RfQ). Bonnet/mini-HAT/pHAT efe kapa efe e lokela ho sebetsa hantle feela le Bonnet kaha phini e 'ngoe le e 'ngoe e kopitsoa ho tloha ho tlhahiso ho ea ho e hlahisoang.

Mona ke tse ling tsa lipontšo tseo re li ratang tseo re li khothalletsang bakeng sa Bonnet:

• Adafruit 2.23 ″ Monochrome OLED Bonnet bakeng sa Raspberry Pi (https://adafru.it/RfQ)
• Adafruit 2.13 ″ Monochrome E-Ink Bonnet bakeng sa Raspberry Pi - NAHANA INK (https://adafru.it/RfR)
• Adafruit 128×64 OLED Bonnet bakeng sa Raspberry Pi (https://adafru.it/RfS)
• Adafruit Mini PiTFT 1.3″ - 240×240 TFT Keketso bakeng sa Raspberry Pi (https://adafru.it/RfT)
• Adafruit Mini PiTFT - 135×240 Mmala TFT Keketso bakeng sa Raspberry Pi (https://adafru.it/RfT)
• Adafruit 1.3″ Bonnet ea 'Mala oa TFT bakeng sa Raspberry Pi - 240×240 TFT + Joystick Addon (https://adafru.it/NFh)
• Adafruit PiOLED - Keketso ea 128×32 Monochrome OLED bakeng sa Raspberry Pi (https://adafru.it/NFh)
• Pimoroni Inky pHAT bakeng sa Raspberry Pi – 3 Color eInk Display (https://adafru.it/RfU)
• Pimoroni Inky pHAT – Pontsho ya eInk ya Mmala e 3 – Bosehla/Botsho/Bosweu (https://adafru.it/RfV)

Mona ke tse ling tsa lipontšo tseo re li ratang tseo re li khothalletsang bakeng sa HAT:

• Adafruit PiTFT 2.2″ HAT Mini Kit – 320×240 2.2″ TFT – No Touch (https://adafru.it/RfX)
• Adafruit PiTFT 2.4″ HAT Mini Kit – 320×240 TFT Touchscreen (https://adafru.it/RfY)
• PiTFT Plus Assembled 320×240 2.8 ″ TFT + Resistive Touchscreen (https://adafru.it/eZS)
• PiTFT 2.8 ″ TFT 320×240 + Capacitive Touchscreen bakeng sa Raspberry Pi (https://adafru.it/e9Y)
• Adafruit PiTFT Plus 320×240 2.8″ TFT + Capacitive Touchscreen (https://adafru.it/CFo)
• Adafruit PiTFT - 320×240 2.8 ″ TFT+Touchscreen bakeng sa Raspberry Pi (https://adafru.it/dDE)
• PiTFT Plus 320×240 3.2 ″ TFT + Resistive Touchscreen (https://adafru.it/RfZ)
• PiTFT - E kopantsoe 480×320 3.5 ″ TFT + Touchscreen bakeng sa Raspberry Pi (https://adafru.it/e27)
• PiTFT Plus 480×320 3.5 ″ TFT+Touchscreen bakeng sa Raspberry Pi (https://adafru.it/Rf-)
• Pimoroni HyperPixel – 4.0″ Hi-Res Display bakeng sa Raspberry Pke (https://adafru.it/Rga)
• Pimoroni HyperPixel - 4.0 ″ Hi-Res Display bakeng sa Raspberry Pi - Non-Touch (https://adafru.it/Rgb)
• Pimoroni Inky wHAT (ePaper/eInk/EPD) – Red/Black/White (https://adafru.it/Rgc)
• Pimoroni Inky wHAT (ePaper/eInk/EPD) – Black/White (https://adafru.it/Rgd)
• Pimoroni HyperPixel 4.0 Square - Touch Display bakeng sa Raspberry Pi – Capacitive Touch PIM470 (https://adafru.it/Rge)

Pinouts

Lihokelo tsa I2C

• STEMMA QT - Tsena ke likhokahanyo tse nyane ka mahlakoreng a mabeli a HAT le Bonnet. U ka sebelisa likhoele tsa STEMMA QT (https://adafru.it/GfR) ho hokahanya sehlopha sa li-sensor tse fapaneng le ho phatloha (https://adafru.it/HMF) ha ho hlokahale solder kapa breadboard! (Lithapo li rekisoa ka thoko.)
• Lihokelo tsena tse peli li hokahane hammoho ka ho tšoana. U ka khona li-sensor tsa daisy-chain le li-breakouts tse amanang le tsona.

STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable 
Thapo ena ea terata e 4 e bolelele ba 150mm / 6 ″ hanyane 'me e kentsoe likhokahanyo tsa li-pin tsa 4 tsa basali tsa JST-SH ka lehlakoreng le leng le lihlooho tsa banna tsa premium Dupont ka lehlakoreng le leng. Ha ho bapisoa le…$0.95

E teng thepeng e teng ka lebenkeleng
kenya lenaneng
STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Nako e telele
Thapo ena ea terata e 4 e bolelele ba 100mm / 4 ″ hanyane 'me e kentsoe likhokahanyo tsa li-pin tse 4 tsa basali tsa JST-SH mahlakoreng ka bobeli. Ha ho bapisoa le chunkier JST-PH tsena ke 1mm sekontiri sebakeng sa… $0.95
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

STEMMA (3-pin JST PH) Lihokelo

• Tsena ke likhokahanyo tse kholoanyane mahlakoreng ka bobeli a HAT le Bonnet. U ka sebelisa tsena ho hokela li-NeoPixels le tse ling ntle le ho solder kapa boardboard e hlokahalang! (Lithapo li rekisoa ka thoko.)
• Li ngotsoe ka linomoro tsa tsona tsa phini: 18 le 13.

Lisebelisoa tse ling tseo re khothaletsang ho li sebelisa le lihokelo tsa STEMMA JST PH ke tsena!

STEMMA JST PH 3-Pin ho Male Header Cable - 200mm
Thapo ena e tla u lumella ho fetola boema-kepe ba lithapo tsa JST PH 3-pin hore e be lithapo tse 3 ka bomong tse nang le li-plug tsa hlooho tsa banna tsa boleng bo holimo tse 0.1 ″ qetellong. Re
re nkile tsena ho tsamaisana le rona… $1.25
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

STEMMA JST PH 3-Pin ho Female Socket Cable - 200mm
Thapo ena e tla u lumella ho fetola boema-kepe ba thapo ea JST PH 3-pin hore e be lithapo tse 3 ka bomong tse nang le li-sockets tsa hlooho ea basali tsa boleng bo holimo tsa 0.1 ″ qetellong. Re nkile tsena ho tsamaisana le… $1.25
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

JST PH 3-pin Plug to Color Coded Alligator Clips Cable
Thapo ena e tla u lumella ho fetola boema-kepe ba lithapo tsa JST PH 3-pin hore e be lithapo tse 3 ka bomong tse nang le likotoana tsa grippy mini alligator. Re nkile tsena ho tsamaisana le liboto tsa rona kapa… $1.95
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

Adafruit NeoPixel LED Strip e nang le 3-pin JST PH Connector
Hokela 'me u bonese, Adafruit NeoPixel LED Strip ena e nang le JST PH Connector e na le li-LED tse 30 ka har'a sebaka sa "60 LED ka mithara",… $12.50
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

Sebatli sa hau ha se sebelise video tag.
Adafruit STEMMA Non-Latching Mini Relay
Likarolo tsa plug-and-play tsa STEMMA li etsa hore projeke ea hau e latelang e se ke ea rekisoa! Ena ke STEMMA Non-Latching Mini Relay. E u fa matla a ho laola, le ho laola…$5.95
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

Lihlooho tsa Raspberry Pi

Ka holimo le tlase ho HAT le Bonnet ho na le lihlooho tsa Raspberry Pi.

• E ka tlase e reretsoe ho hokela ho Pi (e sebetsa hantle ka Pi 400!). Ba ka lehlakoreng la ho tsamaisa Pi 400.
• Lihlooho tse ka holimo li u lumella ho hokela HAT kapa Bonnet. Li-pinouts lia tšoana - feela plug ho HAT efe kapa efe kapa Bonnet!

Adafruit 2.23 ″ Monochrome OLED Bonnet bakeng sa Raspberry Pi
Haeba u batla ponts'o e khanyang, e ka baloang ea OLED bakeng sa Raspberry Pi (mohlomong $22.50
E teng thepeng e teng ka lebenkeleng
kenya lenaneng

PiTFT Plus 480×320 3.5 ″ TFT+Touchscreen bakeng sa Raspberry Pi
Na see ha se pontšo e ntle ka ho fetisisa, e nyane bakeng sa Raspberry Pi? E na le ponts'o ea 3.5 ″ e nang le lipikselse tsa mebala tsa 480 × 320 16-bit le sekoahelo se se nang letho.
E felile
E felile

Lisebelisoa

Files:

• Ntho e makatsang bakeng sa HAT ho Laeborari ea Adafruit Fritzing (https://adafru.it/Rgf)
• Ntho e makatsang bakeng sa Bonnet ho Adafruit Fritzing Library (https://adafru.it/RgA)
• EagleCAD PCB files ho GitHub (https://adafru.it/RgB)
• 3D Model bakeng sa HAT ho GitHub (https://adafru.it/RkA)
• 3D Model bakeng sa Bonnet ho GitHub (https://adafru.it/Rsb)

Schematic and Fab Print bakeng sa CYBERDECK HAT

Schematic and Fab Print bakeng sa CYBERDECK Bonnet

 © Adafruit Industries
E qetetse ho ntlafatsoa: 2021-10-20 01:45:58 PM EDT

Litokomane / Lisebelisoa

adafruit CYBERDECK Bonnet le HAT bakeng sa Raspberry Pi 400 [pdf] Litaelo CYBERDECK, Bonnet le HAT bakeng sa Raspberry Pi 400, CYBERDECK Bonnet le HAT bakeng sa Raspberry Pi 400

Litšupiso

• Bukana ea Mosebelisi