usoro mmụta adafruit
CYBERDECK Bonnet na okpu maka Raspberry Pi 400
Kattni Rembor mepụtara
Emelitere ikpeazụ na 2021-10-20 01:45:58 PM EDT
gafereview
Ndị na-ahụ maka ahụigodo daalụ, ị na-eji Pi 400 na-efegharị ozi ahụ superhighway? Chọrọ ihe ngosi ihu dị mma, ma ọ bụ ikekwe ị ga-achọ waya wetware NeoPixel…?
Ndị dike Cyber, gee ntị ebe a! Anyị nwere ngwaike na-ewepụtaghị ụbọchị efu nke anyị butere mmiri mmiri. Ugbu a ị nwere ike ịgbawa koodu, wee dee scripts nwere ụdị, ekele maka CYBERDECK HAT na Bonnet maka Raspberry Pi 400 sitere na Adafruit zaibatsu.
Ọ dị mma, anyị gbachiri megabytes nke ebule 12 na ụfọdụ isi oghere nwere akụkụ site na ụlọ egwuregwu hacker dị n'okpuru ebe a na-akparịta ụka, ma ọ bụ nnukwu nkwalite na bọọdụ ịgbatị anyị - ugbu a ị nwere ike ịbanye na Pi bonnet ma ọ bụ okpu ọ bụla n'azụ nke gị. Okpokoro isi Pi 400 n'akụkụ dị mma, zuru oke maka ịkwalite oche gị!
Anyị na-enyekwa gị njikọ abụọ STEMMA (JST 3-PH) na GPIO #18 na #13, yana ejima STEMMA QT I2C ọdụ ụgbọ mmiri, maka nkwalite ndị ọzọ (eriri na-ere iche (https://adafru.it/JRA))
Nke a bụ otu ngwaike Kevin Mitnick ji mee ihe mgbe ọ gbapụtara Sidewinder! Ọ dị mma, ma eleghị anya ọ bụghị, mana ọ ga-ahapụ gị ka ịmepụta oche Kali nke kwụ ọtọ site na ịpịnye na otu n'ime ọtụtụ ngosi Bonnets ma ọ bụ okpu anyị.
Na-abịa achịkọtachachaa ma nwalee yabụ na ịkwesighi ịme ihe ọ bụla kama itinye ya. Ọ na-arụ ọrụ kacha mma na kọmputa Pi 400.
Ihe ngosi ngosi gosipụtara Bonnet nwere Otu n'ime 128 × 32 OLED bonnets etinyere (https://adafru.it/RfQ). Ihe ọ bụla bonnet / mini-HAT / pHAT wdg kwesịrị ịrụ ọrụ nke ọma na Bonnet ka a na-emepụta pin ọ bụla site na ntinye gaa na mmepụta.
Nke a bụ ụfọdụ ngosipụta ọkacha mmasị anyị anyị na-akwado maka Bonnet:
- Adafruit 2.23 ″ Monochrome OLED Bonnet maka Raspberry Pi (https://adafru.it/RfQ)
- Adafruit 2.13 ″ Monochrome E-ink Bonnet maka Raspberry Pi - TERE INK (https://adafru.it/RfR)
- Adafruit 128×64 OLED Bonnet maka Raspberry Pi (https://adafru.it/RfS)
- Adafruit Mini PiTFT 1.3 ″ – 240×240 TFT Tinye-on maka Raspberry Pi (https://adafru.it/RfT)
- Adafruit Mini PiTFT – 135×240 Agba TFT mgbakwunye maka Raspberry Pi (https://adafru.it/RfT)
- Adafruit 1.3 ″ TFT Bonnet maka Raspberry Pi – 240×240 TFT + Joystick Addon (https://adafru.it/NFh)
- Adafruit PiOLED – 128×32 Monochrome OLED Tinye-on maka Raspberry Pi (https://adafru.it/NFh)
- Pimoroni Inky pHAT maka Raspberry Pi – Ngosipụta eInk agba 3 (https://adafru.it/RfU)
- Pimoroni Inky pHAT - Ngosipụta eInk agba 3 - Yellow/Black/White (https://adafru.it/RfV)
Nke a bụ ụfọdụ ngosi ọkacha mmasị anyị anyị na-akwado maka okpu:
- Adafruit PiTFT 2.2 ″ okpu Obere - 320 × 240 2.2 ″ TFT - enweghị mmetụ (https://adafru.it/RfX)
- Adafruit PiTFT 2.4 ″ okpu mini Kit – 320×240 TFT ihuenyo mmetụ (https://adafru.it/RfY)
- PiTFT Plus gbakọtara 320 × 240 2.8 ″ TFT + ihuenyo mmetụ na-eguzogide. (https://adafru.it/eZS)
- PiTFT 2.8 ″ TFT 320×240 + Capacitive Touchscreen maka Raspberry Pi (https://adafru.it/e9Y)
- Adafruit PiTFT Plus 320×240 2.8″ TFT + Capacitive Touchscreen (https://adafru.it/CFo)
- Adafruit PiTFT – 320×240 2.8 ″ TFT+ ihuenyo mmetụ maka Raspberry Pi (https://adafru.it/dDE)
- PiTFT Plus 320×240 3.2″ TFT + Resistive Touchscreen (https://adafru.it/RfZ)
- PiTFT – Agbakọtara 480×320 3.5 ″ TFT + ihuenyo mmetụ maka Raspberry Pi (https://adafru.it/e27)
- PiTFT Plus 480 × 320 3.5 ″ TFT+ ihuenyo mmetụ maka Raspberry Pi (https://adafru.it/Rf-)
- Pimoroni HyperPixel – 4.0 ″ Hi-Res Ngosipụta maka Raspberry Pm (https://adafru.it/Rga)
- Pimoroni HyperPixel – 4.0 ″ Hi-Res Ngosipụta maka Raspberry Pi – anaghị emetụ aka (https://adafru.it/Rgb)
- Pimoroni Inky whAT (ePaper/eInk/EPD) - Red/Black/White (https://adafru.it/Rgc)
- Pimoroni Inky whAT (ePaper/eInk/EPD) - Black/White (https://adafru.it/Rgd)
- Pimoroni HyperPixel 4.0 Square – Ngosipụta mmetụ maka Raspberry Pi – Capacitive Touch PIM470 (https://adafru.it/Rge)
Pinouts
Njikọ I2C
- STEMMA QT - Ndị a bụ obere njikọ n'akụkụ ọ bụla nke okpu na Bonnet. Ị nwere ike iji STEMMA QT cables (https://adafru.it/GfR) iji jikọọ ụyọkọ sensọ dị iche iche na nkwụsịtụ (https://adafru.it/HMF) na-enweghị soldering ma ọ bụ breadboard mkpa! (A na-ere eriri ndị dị iche iche.)
- Njikọ abụọ a jikọtara ọnụ n'otu n'otu. Ị nwere ike dasy-chain sensọ na breakouts jikọọ na ha.
STEMMA QT / Qwiic JST SH 4-pin na eriri isi ndị nwoke adịchaghị
Igwe eriri 4-waya dị ntakịrị karịa 150mm / 6 ″ ogologo yana dabara na njikọ njikọ 4-pin nwanyị JST-SH n'otu nsọtụ yana ndị isi nwoke Dupont dị elu na nke ọzọ. Tụnyere na…$0.95
Dị na ngwaahịa
tinye na ụgbọ ibu
STEMMA QT / Qwiic JST SH 4-pin USB – 100mm Ogologo
Igwe eriri 4-waya dị ntakịrị karịa 100mm / 4 ″ ogologo yana dabara na njikọ njikọ 4-pin nwanyị JST-SH na nsọtụ abụọ ahụ. E jiri ya tụnyere chunkier JST-PH ndị a bụ 1mm pitch kama… $0.95
Dị na ngwaahịa
tinye na ụgbọ ibu
Njikọ STEMMA (3-pin JST PH).
- Ndị a bụ nnukwu njikọ n'akụkụ abụọ nke okpu na Bonnet. Ị nwere ike iji ndị a jikọọ NeoPixels na ndị ọzọ na-enweghị soldering ma ọ bụ bred achịcha achọrọ! (A na-ere eriri ndị dị iche iche.)
- A na-eji akara ntụtụ ha akara: 18 na 13.
Nke a bụ ụfọdụ ngwa anyị na-akwado iji njikọ njikọ STEMMA JST PH gị!
STEMMA JST PH 3-Pin na eriri nkụnye nwoke - 200mm
Igwe USB a ga-ahapụ gị ka ịgbanye ọdụ ụgbọ mmiri JST PH 3-pin ka ọ bụrụ waya 3 nke nwere nnukwu ọkpọ nkụnye eji isi mee 0.1 ″ nwoke na njedebe. Anyị bụ
na-ebu ndị a ka ọ dabara na anyị… $1.25
Dị na ngwaahịa
tinye na ụgbọ ibu
STEMMA JST PH 3-Pin na eriri eriri nwanyị - 200mm
Igwe USB a ga-ahapụ gị ka ịgbanye ọdụ ụgbọ mmiri JST PH 3-pin ka ọ bụrụ wires 3 nke nwere oghere isi isi nwanyị 0.1 dị elu na njedebe. Anyị na-ebu ndị a ka ọ dabara na… $1.25
Dị na ngwaahịa
tinye na ụgbọ ibu
Nkwụnye 3-pin JST PH na eriri Clips Alligator nwere agba
Igwe eriri a ga-ahapụ gị ka ị tụgharịa ọdụ ụgbọ mmiri JST PH 3-pin ka ọ bụrụ waya 3 nke nwere obere mkpirisi mkpirisi grippy. Anyị na-ebu ndị a ka ọ dabara na bọọdụ anyị ọ bụla ma ọ bụ… $1.95
Dị na ngwaahịa
tinye na ụgbọ ibu
Adafruit NeoPixel LED Strip nwere njikọ 3-pin JST PH
Tinye ọkụ ma na-egbuke egbuke, Adafruit NeoPixel LED Strip na JST PH Connector nwere 30 ngụkọta LED na oghere "60 LED kwa mita", ... $ 12.50
Dị na ngwaahịa
tinye na ụgbọ ibu
Ihe nchọgharị gị anaghị akwado vidiyo ahụ tag.
Adafruit STEMMA Obere Relay na-abụghị Latching
Akụkụ plọg na-egwu STEMMA na-eme ka ọrụ gị na-esote enweghị ere! Nke a bụ STEMMA Obere Relay na-abụghị Latching. Ọ na-enye gị ike ijikwa, na ịchịkwa…$5.95
Dị na ngwaahịa
tinye na ụgbọ ibu
Raspberry Pi nkụnye eji isi mee
N'elu na ala nke okpu na Bonnet bụ ndị isi Raspberry Pi.
- Ezubere ala ka itinye na Pi (na-arụ ọrụ kacha mma na Pi 400!). Ha nọ n'akụkụ iji kwado Pi 400.
- Isi nkụnye eji isi mee bụ inye gị ohere itinye okpu ma ọ bụ Bonnet. Pinouts bụ otu - naanị tinye okpu ma ọ bụ Bonnet ọ bụla!
Adafruit 2.23 ″ Monochrome OLED Bonnet maka Raspberry Pi
Ọ bụrụ na ị na-achọ ihe ngosi OLED na-egbuke egbuke maka Raspberry Pi (yikarịrị $22.50).
Dị na ngwaahịa
tinye na ụgbọ ibu
PiTFT Plus 480 × 320 3.5 ″ TFT+ ihuenyo mmetụ maka Raspberry Pi
Nke a ọ bụghị ihe ngosi kacha mma, obere ngosi maka Raspberry Pi? Ọ nwere ngosipụta 3.5 ″ nwere 480 × 320 pikselụ agba 16-bit yana ihe mkpuchi mmetụ na-eguzogide.
Ọdịghị na ngwaahịa
Ọdịghị na ngwaahịa
Nbudata
Files:
- Ihe na-efe efe maka okpu n'ọbá akwụkwọ Adafruit Fritzing (https://adafru.it/Rgf)
- Ihe fritzing maka Bonnet na Adafruit Fritzing Library (https://adafru.it/RgA)
- EagleCAD PCB filedị na GitHub (https://adafru.it/RgB)
- Ụdị 3D maka okpu na GitHub (https://adafru.it/RkA)
- Ụdị 3D maka Bonnet na GitHub (https://adafru.it/Rsb)
Schematic na Fab Bipute maka okpu CYBERDECK
Schematic na Fab Bipute maka CYBERDECK Bonnet
© Adafruit Industries
Emelitere ikpeazụ: 2021-10-20 01:45:58 PM EDT
Akwụkwọ / akụrụngwa
 |
Adafruit CYBERDECK Bonnet na okpu maka Raspberry Pi 400 [pdf] Ntuziaka CYBERDECK, Bonnet na okpu maka Raspberry Pi 400, CYBERDECK Bonnet na okpu maka Raspberry Pi 400 |
