Mounting instructions

POS mounting solution

Item no: 2987166

SP-POS-100

VESA Compatible 75×75  100×100

---

           

A (x1)                      B (x1)         C (x1)            D (x1)

                       

E (x1)             F (x1)             G (x1)       H (x1)      I (x1)

                                                        

J (x1)      K (x2)      L (x3)      M (x2) M5x6    N (x1) M6x10

                                   

O (x4) M5      P (x1) 4mm    Q (x1) 6mm       R (x1) 8mm

---

                                                 

M-A (x4) M4x12      M-B (x4) M5x12        M-C (x4) D5

---

1

Desktop with Existing Through-Hole.

        

---

2

1. Cable clip (K) can be adjusted by demands.

---

3

---

4

---

5

---

6

1. Too long
2. Too Short

---

7

---

Note: If the display does not stop at your desired position, tighten the screws as shown.

---

               

---

1. Terminal holder
2. Printer holder
3. Scanner holder
4. Cable clip (K) can be adjusted by demands.

Width adjustment according to device.

IMPORTANT:
Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty.

INSTRUCTIONS OF SAFETY AND WARNINGS:

• Make sure that the mounting surface is strong enough to handle a mounted product and equipment.
• DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
• Always use an assistant or a mechanical lifting device to safely lift and position heavy products.
• Tighten screws firmly, but do not over tighten. Over tightening can cause product damage that greatly reduces the holding power.
• Keep a clear area and distance from moving parts when using the product.
• Use only as intended. Never stand, hang or climb on the product.
• This product is intended for indoor use only.
• Any attempts to reconstruct the construction aren’t allowed.
• This product may contain small items that could be a choking hazard if swallowed. Keep children away unless the product is intended for their use and all instructions and manuals are fully reviewed and understood by them.
• Check that the product is secure and safe to use at regular intervals (at least every three months).

Should you ever have any questions or feel you require help please contact your place of purchase for assistance.

Documents / Resources

	SpeaKa SP-POS-100 POS Mounting Solution [pdf] Instruction Manual SP-POS-100 POS Mounting Solution, SP-POS-100, POS Mounting Solution, Mounting Solution
	SpeaKa SP-POS-100 POS Mounting Solution [pdf] Instruction Manual SP-POS-100 POS Mounting Solution, SP-POS-100, POS Mounting Solution, Mounting Solution

References

• User Manual