SM V48 Single Head Cutter Plotter

ABOUT

• 【CUTTING CAPACITY】- 34-inch vinyl cutter with maximum paper feed of 870mm(34.3″), maximum cutting width of 780mm(30.7″), cutting precision of +/-0.01mm(0.0004″), and paper feed precision of 3m(118″).
• 【STRONG STABILITY】- Adopts D-typed motherboard and 128K-2M high speed cache memory. 2 double-spring pinch rollers and aluminum knurling stick ensure that the paper feed will not deviate by long distance.
• 【HIGH COMPATIBILITY】- Available with COMPIM and USB interface for more precise control. Supports DM/PL, HP/GL language. System: Pentium processor-based PC or compatible computer (Windows), Windows XP/Vista/7/8/10 (32-bit & 64-bit). NOT compatible with Mac system.
• 【DIGITAL CONTROL】- Comes with illuminated LCD screen and large control panel. With cutting pressure 10-500g adjustable, and cutting speed 10-800mm/s adjustable.
• 【WIDELY USED】- Can be used in advertisement field, various decoration, handcraft, supplementary for heat transfer, label & sign making, etc.

Specifications

• Maximum Media Width: 1350 mm
• Maximum Cutting Width: 1240 mm
• Maximum Contour Cutting Width: 1200 mm
• Packing Size: 1620 x 380 x 420 mm
• Gross Weight: 39 kg
• Cutting Precision: ±0.01 mm
• Repeat Precision: 0.082 mm
• Maximum Moving Speed: 700 mm/s
• Maximum Cutting Speed: 600 mm/s
• Processor Memory: 128 MB
• Motor Type: Stepper
• Power Consumption: Less than 100 W
• Working Environment: Temperature range of +5°C to +35°C
• Max Paper Feed: 34.3″ (870 mm)
• Max Cutter Width:30.7″ (780 mm)
• Cutter Pressure: 10-500g
• Cutting Speed: 0.4″-31.5″/s (10-800 mm/s)
• Memory: 128K-2M
• Repetition Accuracy: 0.0004″ (0.01 mm)

Additional Information

Product description

Usage Guide 

Setup and Installation

1. Unbox the Plotter: Ensure all components, including power cables, USB cables, blades, and cutting mat, are included.
2. Position the Machine: Place it on a stable surface. Ensure proper ventilation.
3. Connect the Power Supply: Plug in the power cable and turn on the machine.
4. Install Drivers & Software:
   • Install the required software (e.g., CorelDRAW, SignMaster, or ArtCut).
   • Install the necessary drivers for communication between the plotter and the computer.
5. Connect to PC: Use a USB cable or Wi-Fi (if supported) to link the plotter to your computer.

Loading Material

1. Adjust Pinch Rollers: Ensure the rollers align with the material width.
2. Load the Vinyl/Paper: Feed the material under the rollers and adjust its position.
3. Set the Cutting Origin: Use the control panel or software to set the starting position.

Blade Setup

1. Insert the Blade: Choose a blade angle (e.g., 30°, 45°, or 60°) depending on the material.
2. Adjust Cutting Depth:
   • Too deep = damage to the cutting strip.
   • Too shallow = incomplete cuts.
3. Test Cut: Perform a small test cut to confirm settings.

Cutting Process

1. Prepare the Design: Create or import your design into the cutting software.
2. Adjust Cutting Settings: Set speed, pressure, and blade force according to the material type.
3. Send the Job: Click Cut/Send from the software.
4. Monitor the Process: Ensure smooth movement and alignment.

Contour Cutting (Using Camera)

1. Print Your Design with Registration Marks.
2. Load the Printed Material.
3. Use the Optical Camera: The cutter will detect the marks and align accordingly.
4. Start Cutting: Ensure accuracy before proceeding.

Finishing Up

1. Unload the Material: Carefully remove the cut design.
2. Weed Excess Vinyl: Remove unwanted sections using a weeding tool.
3. Apply Transfer Tape (if needed).
4. Power Off the Machine.

Maintenance Tips

• Regularly clean the blade holder and pinch rollers.
• Keep the cutting strip in good condition.
• Update firmware/software as needed.
• Store blades properly to prevent dulling.

Safety Guidelines

To ensure safe and optimal operation of your SM V48 Single Head Cutter Plotter, follow these precautions:

Electrical Safety

• Use the correct power voltage as specified in the user manual.
• Avoid using damaged or loose power cords.
• Do not operate the plotter with wet hands or in a damp environment.
• Turn off and unplug the machine when not in use.

Blade Safety

• Handle cutting blades carefully to avoid injury.
• Always use the appropriate blade for your material.
• Store unused blades safely away from children.

Operational Safety

• Ensure the cutting area is clear before starting.
• Keep hands and loose clothing away from moving parts.
• Use proper ventilation when working with adhesive-backed vinyl.

Maintenance Safety

• Turn off the machine before performing maintenance.
• Regularly clean the blade holder, pinch rollers, and cutting strip.
• Do not attempt to disassemble internal electrical components.

Warranty Information

The SM V48 Single Head Cutter Plotter typically comes with a standard manufacturer warranty, which may vary by region or seller. Below are the common warranty terms:

Warranty Coverage

• Duration: Usually 1 year from the purchase date.
• Covers: Manufacturing defects, electrical faults, and non-user-induced malfunctions.
• Parts Covered: Mainboard, motor, display panel, and power supply unit.

Warranty Exclusions

• Damage due to mishandling, improper use, or unauthorized modifications.
• Wear-and-tear items (e.g., blades, cutting strip, pinch rollers).
• Issues caused by third-party software or accessories.
• Damage from power surges or improper voltage use.

FAQs 

How do I install the SM V48 cutter plotter?
Connect the power and USB cable, install the driver and cutting software, load the material, and set the blade.

Why is my cutter not cutting accurately?
Check blade sharpness, adjust cutting pressure and speed, and ensure the material is properly aligned.

What maintenance does the SM V48 cutter require?
Regularly clean the blade holder, pinch rollers, and cutting strip. Replace worn-out blades and check software updates.

Documents / Resources

SM V48 Single Head Cutter Plotter [pdf] Instruction Manual V48 Single Head Cutter Plotter, V48, Single Head Cutter Plotter, Head Cutter Plotter, Cutter Plotter

References

• User Manual