Learn about the TBPCP2-3070 RF Pulse Current Monitoring Probe with Tekbox's user manual. Designed for surge or RF pulse current monitoring applications, this affordable probe has a flat response from 30 Hz to 70 MHz and is characterized over the frequency range from 1 Hz to 200 MHz.
Learn how to use the TBPCP1-20100 RF Pulse Current Monitoring Probe from Tekbox with these product usage instructions. This affordable probe has a flat response from 20 Hz to 100 MHz and is typically used for surge or RF pulse current monitoring applications in the time domain. Calibrate with the TBCP1-CAL RF Current Probe Calibration Fixture if required. Get detailed specifications and ordering information in this user manual.
Learn about the TEKBOX TBCCP1-400K600 Coaxial RF Current Monitoring Probe through its user manual. This affordable EMC pre-compliance test equipment has a 3 dB bandwidth from 400 kHz to 600 MHz, making it ideal for measuring RF currents in coaxial cables and passive loop antennas. Download the application note for more details.
Learn about the TBCCP1-2K70 Coaxial RF Current Monitoring Probe with a very flat response from 2 kHz to 70 MHz. This affordable EMC pre-compliance test equipment is compliant with CISPR 15 and CISPR 16-1-4 standards for large loop antennas. Get detailed specifications and usage instructions in this manual.
Learn about the TBCCP1-3K100 coaxial RF current monitoring probe from Tekbox. With a 3 kHz to 100 MHz bandwidth, it's ideal for measuring RF currents in coaxial cables or as a transducer for active loop antennas. Download the application note on Loop Antenna Basics for more information.
Learn about the TEKBOX TBCP2-500 - 32mm Snap-On RF Current Monitoring Probe with a flat response of 500 MHz. This affordable EMC pre-compliance test equipment has a transfer impedance of >15 dB Ohm and a characterized frequency range of 30kHz to 600 MHz. Check out the typical transfer impedance table and create a correction file for EMC measurement software. Find all the specifications you need in the user manual.
Learn more about the TEKBOX TBSCP1-10M500 RF Surface Current Monitoring Probe with its characterized frequency range of 30 kHz to 400 MHz, typical transfer impedance of -7 dB Ohm, and footprint of 40mm x 15mm. Find out how to calibrate the probe and use its typical transfer impedance data for EMC measurement software.
