Probe Manuals & User Guides

COMET CO2 External Probe Instruction Manual

August 29, 2026

COMET CO2 External Probe Overview The CO2G-xx I2C-output probe measures air CO2 concentration in chemically non-aggressive environments using a dual-wavelength NDIR principle with automatic compensation for ageing effects. The probe features IP65 protection, a replaceable PTFE sensor cover/filter, and stores…

Brand: COMET

TEKBOX TBPCP3 Pulse Current Monitoring Probe Instruction Manual

August 21, 2026

TEKBOX TBPCP3 Pulse Current Monitoring Probe  Introduction The TBPCP3-20H70 is an RF pulse current monitoring probe, expanding the Tekbox product range of affordable test equipment. The probe has a 3 dB bandwidth from 20 Hz to 70 MHz and is…

Brand: TEKBOX

Telonic Instruments TBPCP4-50H50 RF Pulse Current Monitoring Probe User Manual

August 20, 2026

Telonic Instruments TBPCP4-50H50 RF Pulse Current Monitoring Probe Quick Guide Terminate the probe output according to your measurement setup: the specified transfer impedance depends on using a 50 Ω load or a high-impedance load. Use the probe for time-domain surge/RF…

Brand: Telonic Instruments

PINTECH PT-8000 Series Differential Probe Instruction Manual

August 17, 2026

PINTECH PT-8000 Series Differential Probe Overview The PT series differential probe is designed for measuring differential voltages and converting high differential voltages into a low-voltage output for use with an oscilloscope. Specifications Parameter PT-8101 PT-8001 PT-8002 Bandwidth (-3dB) 10X: DC-50MHz100X:…

Brand: PINTECH

PINTECH PT-600 Series Differential Probe Instruction Manual

August 17, 2026

PINTECH PT-600 Series Differential Probe General Overview of Security Please read the following safety precautions carefully to avoid you from getting hurt and damaging to the product or any product connected to it. Must be grounded when used: This probe…

Brand: PINTECH

TEKBOX TBCP1-200 RF Current Monitoring Probe Instruction Manual

August 16, 2026

TEKBOX TBCP1-200 RF Current Monitoring Probe Overview The TBCP1-200 is a fixed-aperture RF current monitoring probe for EMC pre-compliance testing. It has a 3 dB bandwidth of approximately 200 MHz and is characterized for use from 1 kHz to 500…

Brand: TEKBOX

Sensorcon B004YWTP06 2 CO Detector Kit With Pump and Probe Instruction Manual

July 25, 2026

Sensorcon B004YWTP06 2 CO Detector Kit With Pump and Probe Specification Brand Sensorcon Style Inspector Kit Power Source Battery Powered Product Dimensions 10"D x 10"W x 4"H Item Weight 0.74 kg Alarm Visual Sensor Type Carbon Monoxide Global Trade Identification…

Brand: SENSORCON

PinTech N2050Apro Differential Probe Instruction Manual

July 22, 2026

PinTech N2050Apro Differential Probe Quick Setup and Use Read and follow the safety warnings in this manual. Ensure the circuit under test is powered off before connecting the probe. Inspect the differential probe before each use; if any damage is…

Brand: PINTECH

PINTECH N20 Series Oscilloscope Differential Probe Instruction Manual

July 22, 2026

PINTECH N20 Series Oscilloscope Differential Probe Specifications Power/ratio switch: Press to start up; Hold down three seconds to indicate shutdown; Press the power button briefly, and the power light lights; continue to Press the power button, the switching ratio transitions.…

Brand: PINTECH

ThermoWorks RFX MEAT MINI Wireless Probe Instruction Manual

July 3, 2026

 Radiance Instruments Ltd. Flat 2002, 20/F, CEO Tower, 77 Wing Hong Street Lai Chi Kok, Kowloon, Hong Kong, China. Phone: +852 2466-8608 Fax: +852 2466-1231 RFX MEAT MINI Getting Started Remove the RFX MEAT MINI from the packaging, including the…

Brand: ThermoWorks