Learn about the TBPCP2-3070 RF Pulse Current Monitoring Probe with Tekbox's user manual. Designed for surge or RF pulse current monitoring applications, this affordable probe has a flat response from 30 Hz to 70 MHz and is characterized over the frequency range from 1 Hz to 200 MHz.
Learn how to use the TBPCP1-20100 RF Pulse Current Monitoring Probe from Tekbox with these product usage instructions. This affordable probe has a flat response from 20 Hz to 100 MHz and is typically used for surge or RF pulse current monitoring applications in the time domain. Calibrate with the TBCP1-CAL RF Current Probe Calibration Fixture if required. Get detailed specifications and ordering information in this user manual.
Learn about the TBCCP1-2K70 Coaxial RF Current Monitoring Probe with a very flat response from 2 kHz to 70 MHz. This affordable EMC pre-compliance test equipment is compliant with CISPR 15 and CISPR 16-1-4 standards for large loop antennas. Get detailed specifications and usage instructions in this manual.
Learn about the TBCCP1-3K100 coaxial RF current monitoring probe from Tekbox. With a 3 kHz to 100 MHz bandwidth, it's ideal for measuring RF currents in coaxial cables or as a transducer for active loop antennas. Download the application note on Loop Antenna Basics for more information.
Learn more about the TEKBOX TBSCP1-10M500 RF Surface Current Monitoring Probe with its characterized frequency range of 30 kHz to 400 MHz, typical transfer impedance of -7 dB Ohm, and footprint of 40mm x 15mm. Find out how to calibrate the probe and use its typical transfer impedance data for EMC measurement software.
