“
Specifications:
- Model: 180MW1200TA
- Voltage: 120VAC
- Rated Output Power: 1200W
- Rated Input Power: 2050W
- Dimensions (LxWxH): 22.625 x 20.67 x 14.5
- Net Weight: 71 lb.
- Shipping Weight: 76 lb.
- Plug Type: NEMA 5-20P
Product Usage Instructions:
Precautions:
- Do not operate the oven with the door open.
- Avoid placing objects between the front face and the door.
- Do not operate a damaged oven.
- Do not attempt to adjust or repair the oven yourself.
Safety Instructions:
- Read all instructions before using the appliance.
- Follow precautions to avoid exposure to excessive microwave
energy. - Clean the door and exterior parts with mild, nonabrasive
soaps. - Ensure the appliance is properly grounded.
- Install or locate the appliance according to installation
instructions. - Use the appliance only for its intended purpose as described in
the manual.
Tips for Safe Use:
- Avoid overcooking food and be cautious with paper or plastic
materials inside the oven. - Remove wire twist-ties from bags before heating them.
- Avoid heating whole eggs or sealed containers that may
explode. - Do not use corrosive chemicals or vapors in the appliance.
- Do not use the cavity for storage purposes.
FAQ:
Q: Can I adjust or repair the oven myself if needed?
A: No, it is important that the oven is only adjusted or
repaired by properly qualified service personnel to ensure safety
and proper functioning.
Q: What should I do if material inside the oven ignites?
A: Keep the oven door closed, turn off the oven, and disconnect
the power cord or shut off power at the fuse or circuit-breaker
panel.
“`
User Manual
Commercial Microwaves
E214180
3088899
CONFORMS TO UL 923 & CSA C22.2 NO. 150 CONFORMS TO NSF/ANSI 4
Models: 180MW1200TA, 180MW1800TH, 180MW2100TH Read and keep these instructions. Indoor use only.
12/2024
User Manual
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
1. Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy.
2. Do not place any object between the oven front face and the door, or allow soil or cleaner residue to accumulate on sealing surfaces.
3. Do not operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the:
A.) DOOR (bent)
B.) HINGES AND LATCHES (broken or loosened)
C.) DOOR SEALS AND SEALING SURFACES
4. The oven should not be adjusted or repaired by anyone except properly qualified service personnel.
Specifications
Model
Voltage
Rated
Rated
Output Power Input Power
180MW1200TA 120VAC
1200W
2050W
180MW1800TH 208V/230VAC 1800W
2800W
180MW2100TH 208V/230VAC 2100W
3200W
Dimensions (LxWxH)
Net Wt.
22.625″ x 20.67″ x 14.5″ 71 lb.
22.625″ x 20.67″ x 14.5″ 71 lb.
22.625″ x 20.67″ x 14.5″ 71 lb.
Shipping Wt. 76 lb.
76 lb.
76 lb.
Plug Type
NEMA 5-20P NEMA 6-20P NEMA 6-20P
2
SAVE THESE INSTRUCTIONS
User Manual
IMPORTANT SAFETY INSTRUCTIONS Save these instructions.
When using electrical appliances, basic safety precautions should be followed including the following:
WARNING: To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy:
1. Read all instructions before using the appliance.
2. Read and follow specific “PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY” found on page 2.
15. When cleaning the door and other exterior parts, use only mild, nonabrasive soaps or detergent applied with a sponge or soft cloth.
16. To reduce the risk of fire in the oven cavity:
3. This appliance must be grounded. Connect only to properly grounded outlet. See “GROUNDING INSTRUCTIONS” found on page 4.
A.) Do not overcook food. Carefully attend appliances when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking.
4. Install or locate this appliance only in accordance with the provided installation instructions.
B.) Remove wire twist-ties from paper or plastic bag before placing bag in oven.
5. Some products such as whole eggs and sealed
C.) If material inside of the oven ignites, keep oven
containers–for example, closed glass jars–are able
door closed, turn oven off, and disconnect the power
to explode and should not be heated in this oven.
cord, or shut off power at the fuse or circuit-breaker
6. Use this appliance only for its intended use as
panel.
described in the manual. Do not use corrosive
D.) Do not use the cavity for storage purposes. Do not
chemicals or vapors in this appliance. This type of
leave paper products, cooking utensils, or food in the
oven is specifically designed to heat, cook, or dry
cavity when not in use.
food. It is not designed for industrial or laboratory use. 17. Liquids, such as water, coffee, or tea, are able to
7. HOT CONTENTS CAN CAUSE SEVERE BURNS. DO NOT be overheated beyond the boiling point without
ALLOW CHILDREN TO USE THE MICROWAVE.
appearing to be boiling. Visible bubbling or boiling
Use caution when removing hot items.
when the container is removed from the microwave
8. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.
9. This appliance should be serviced only by qualified service personnel. Contact the nearest authorized
oven is not always present. THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID.
To reduce the risk of injury to persons:
service facility for examination, repair, or adjustment.
A.) Do not overheat the liquid.
10. Do not cover or block any openings on the appliance.
11. Do not store this appliance outdoors. Do not use this product near water–for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location.
12. Do not immerse cord or plug in water.
13. Keep cord away from heated surface.
14. Do not let cord hang over edge of table or counter.
B.) Stir the liquid both before and halfway through heating it.
C.) Do not use straight-sided containers with narrow necks.
D.) After heating, allow the container to stand in the microwave oven for a short time before removing the container.
E.) Use extreme care when inserting a spoon or other utensil into the container.
3
User Manual
Grounding Instructions
Save these instructions.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord and grounding plug. The appliance must be plugged into an outlet that is properly installed and grounded.
WARNING: Improper use of the grounding can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounded plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance.
DANGER–Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance.
WARNING–Electric Shock Hazard Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded. 1. A short power-supply cord is provided to reduce the risks resulting from becoming
entangled in or tripping over a longer cord. 2. Longer cord sets or extension cords are available and may be used if care is exercised in
their use. 3. If a cord or extension cord is used:
A.) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.
B.) The extension cord must be a grounding-type 3-wire cord. C.) The longer cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
4
User Manual
Radio Interference
THIS DEVICE COMPLIES WITH PART 18 OF THE FCC RULES. 1. Operation of the microwave oven may cause interference to your radio, TV, or
similar equipment. 2. When there is interference, it may be reduced or eliminated with the following measures:
A.) Clean door and sealing surface of the oven. B.) Reorient the receiving antenna of radio or television. C.) Relocate the microwave oven with respect to the receiver. D.) Move the microwave oven away from the receiver. E.) Plug the microwave oven into a different outlet so that the microwave oven and
receiver are on different branch circuits.
Safety
1. The oven must be on a leveled surface. 2. Use only the specified bag size when using Direct Access Popcorn. 3. The oven has several built-in safety switches to ensure that the power remains off when the
door is open. Do not tamper with these switches. 4. Do not operate the microwave oven empty. Operating the oven with no food or food that is
extremely low in moisture can cause fire, charring, or sparking. 5. Do not heat baby bottles or baby food in the microwave oven. Uneven heating may occur
and could cause physical injury. 6. Do not heat narrow-necked containers such as syrup bottles. 7. Do not attempt to deep-fry in your microwave oven. 8. Do not attempt home canning in this microwave oven, as it is impossible to be sure all
contents of the jar have reached boiling temperature. 9. Do not use this microwave oven for commercial purposes. This microwave oven is made for
household use only. 10. To prevent delayed eruptive boiling of hot liquids and beverages or scalding yourself, stir
liquid before placing the container in the oven and again halfway through cooking time. Let stand in the oven for a short time and stir again before removing the container. 11. Exercise caution when cooking food in the microwave oven to avoid burning due to excessive cooking. 12. Failure to maintain the oven in a clean condition could lead to deterioration that could adversely affect the life of the appliance and possibly result in a hazardous situation.
5
User Manual
Materials & Utensils in Microwave Oven
Tightly-closed containers could explode. Closed containers should be opened and plastic pouches pierced before cooking. There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, test utensil in question with the following procedure: 1. Fill a microwave safe container with 1 cup (250mL) of cold water along with utensil in question. 2. Cook on maximum power for 1 minute. Do not exceed 1 minute. 3. Carefully feel the utensil. If it is warm, do not use for microwave cooking.
See below for a list of materials and their proper handling instructions:
Utensil Aluminum Foil
Browning Dish
Dinnerware Glass Jars
Glassware Oven Cooking Bags Paper Plates and Cups Paper Towels Parchment Paper Plastic
Plastic Wrap
Thermometers Wax Paper
Notes For shielding only. Small, smooth pieces can be used to cover thin parts of meat or poultry to prevent overcooking. Arcing can occur if foil is too close to oven walls. The foil should be at least 1″ (2.5 cm) away from oven walls. Follow manufacturer’s instructions. Bottom of browning dish must be placed on ceramic board. Incorrect usage may cause the ceramic board to break. Use only if labeled “microwave safe.” Do not use cracked or chipped dishes. Always remove lid, and use only to heat food until warm. Most glass jars are not heat-resistant and may break. Use only if heat-resistant. Do not use cracked or chipped dishes, and make sure there is no metallic trim. Do not close with metal tie. Make slits to allow steam to escape. Use for short-term cooking/warming only. Do not leave unattended while cooking. Use only to cover food for reheating and absorbing fat. Do not leave unattended while cooking. Use only as a cover to prevent splattering or wrap for steaming. Use only if labeled “microwave safe.” Some plastic containers soften as food inside gets hot. “Boiling bags” and tightly closed plastic bags should be slit, pierced, or vented as directed by package. Use only if labeled “microwave safe.” Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. Use only for use with meat and candy thermometers and if labeled “microwave safe.” Use as a cover to prevent splattering and retain moisture.
See below for a list of materials to avoid when using the microwave oven:
Utensil
Notes
Aluminum Tray
May cause arcing. Transfer food into microwave safe dish.
Food Carton with Metal May cause arcing. Transfer food into microwave safe dish. Handle
Metal or Metal-Trimmed Metal shields the food from microwave energy. Metal trim may cause arcing. Utensils
Metal Twist Ties
May cause arcing or start fire.
Paper Bags
May start fire.
Plastic Foam
May melt or contaminate the liquid inside when exposed to a high temperature.
Wood
Will dry out and split or crack.
6
User Manual
Setting Up Your Oven
In case of any differences between the appliance and the pictures in this manual, refer to your specific product.
Names of Oven Parts & Accessories
Remove the oven and all materials from the carton and oven cavity. A.) Control panel B.) Safety interlock system C.) Observation window D.) Ceramic board NOTES: 1. Do not press the ceramic board forcibly. 2. Place and remove the utensils gently during the operation in order
to avoid damage to the ceramic board. 3. After using, do not touch the ceramic board by hand in order to
avoid high-temperature scald.
7
User Manual
Countertop Installation
1. Remove all packing material and accessories. 2. Examine the oven for any damage such as dents or a broken door.
Do not install if oven is damaged. 3. Remove any protective film on the oven’s cabinet surface.
FIG 1
12 inch(30cm)
4.0 inch(10cm)
4.0 inch(10cm)
OPEN
36.0 in (91.4 cm)
FIG 2
A
B
Installation
1. Select a level surface that provides enough open space for the intake and/or outlet vents (FIG 1).
A 4″ (10 cm) spacing should be kept between the appliance and right and back walls, and a 12″ (30 cm) spacing kept on the top. Never dismantle the appliance’s feet, and do not block the air intake and exhaust opening. The left side must be open.
A.) Blocking the intake and/or outlet openings can damage the oven.
B.) Place the oven as far away from radios and TVs as
C
possible. Operation of microwave oven may cause
interference to your radio or TV reception.
C.) Plug your oven into a standard household outlet. Be sure the voltage and the frequency are the same as the voltage and the frequency on the rating label.
D.) WARNING: The plug socket, electric appliances, or the
appliance should be
wkehpicthawcaany
be effected by heat and moisture from any vents on the oven.
2. Stacking installation instructions below. Never stack more than two units.
A.) Loosen screws and remove mounting plates as shown (FIG 2). Retighten the screws after the mounting plates have been removed.
B.) Remove the corner screws as shown in FIG 2. This is where the units will mount together.
C.) Mount the mounting plates removed in Step A in the
position where the screws were removed in Step B (FIG 2).
Retighten the screws that were removed from the corners
8
to secure the mounting plates.
User Manual
Cleaning Instructions
Always keep the oven clean. For cleaning instruction on particular pieces of the appliances, see below:
Glass Viewing Window, Inner Door Panel, and Oven Front: 1. For best performance and to maintain a high degree of safety, the inner door panel should
be free of food and grease build-up. 2. Clean parts with mild detergent, rinse, and wipe dry. 3. Never use abrasive powders or pads.
Control Panel and Plastic Parts: 1. Do not apply a detergent or alkaline liquid spray, as it may cause damage. 2. Use a dry cloth, not a soaked cloth.
Scrub your glass to a sparkling shine while leaving absolutely no residue or streaks with this Noble Chemical Reflect glass cleaner! Reflect boasts a ready-to-use formula that quickly penetrates dust, grease, soil, and smoke on all glass surfaces.
Oven Interior: 1. Be sure to clean up spilled liquids, splattered oil, and food debris as quickly as possible. If
oven is used when dirty, efficiency drops and dirt that gets stuck may cause odors. 2. Use cloth soaked in lukewarm water with a mild detergent that has been dissolved, then rinse
soap off with a damp cloth.
CAUTION: Do not wipe plastic and painted sections of the oven with bleach, thinners, or other cleaning agents. This may cause parts to dissolve.
CAUTION: Clean oil blockage and filter regularly. Otherwise, stain on oil blockage will drop on food and appliance will overheat.
Easily attack and eliminate 99.99% of harmful bacteria with this Noble Chemical QuikSan sanitizer and disinfectant. Its powerful solution is perfect for sanitizing virtually all hard, nonporous food contact surfaces quickly and efficiently.
9
User Manual
Control Panel & Features
1. Power Buttons 2. Time Entry Button 3. Double Quantity Button
4. Stop/Reset Button 5. Start Button 6. Number Keyboard
Operation Instructions
USER OPTIONS Items bolded (right) are the default values.
Option
1 EOC Tone
(1)
(2) (3) (4) (5)
2 Beeper Volume
3 Beeper On/Off
4 Keyboard Window
5
(6)
On-the-Fly
6 Door Reset
7 Max Time
8 Manual Programming
9 Double Digit
Setting
OP:10 OP:11 OP:12 OP:20 OP:21 OP:22 OP:23 OP:30 OP:31 OP:40 OP:41 OP:42 OP:43 OP:50 OP:51 OP:60 OP:61 OP:70 OP:71 OP:80 OP:81 OP:90 OP:91
Description
3-second beep Continuous beep 5 quick beeps, repeating Beeper off Low Medium High Keybeep off Keybeep on 15 seconds 30 seconds 60 seconds 120 seconds On-the-fly disabled On-the-fly enabled Door reset disabled Door reset enabled 60-minute maximum cook time 10-minute maximum cook time Manual programming disabled Manual programming enabled Single-digit mode: 10 programs Double-digit mode: 100 programs
DEFAULT COOK TIMES
The oven will ship with the following preset cook times (right) unless otherwise noted in the product specification.
10
User Manual
Operation Instructions
Power Up “_ _ _ _ _ _ _” displays when the oven is electrified for the first time. If “pause” button is pressed, the oven will change to Idle Mode. Under Idle Mode, no button can be pressed.
Idle Mode 1. The oven shall enter Idle Mode after a set number of seconds has expired in Ready Mode
without a keyboard press or a door open and close. The number of seconds is determined by the keyboard Timeout Window, set by User Option 4. 2. During Idle Mode, the screen displays “ECO”. 3. Opening and closing the oven door will make the unit exit Idle Mode and enter Ready Mode.
Ready Mode 1. In this mode, the oven is ready to either begin a manual or preset cook cycle. 2. Opening and closing the door while the oven is in Idle Mode will put the oven into Ready Mode. 3. During Ready Mode, “READY” displays. 4. From Ready Mode, the oven can go to almost all of the other modes.
Door Open Mode 1. While the door of the oven is open, the oven shall be in Door Open Mode. 2. If the door is open during cooking state, “DOOR OPEN” will display and the fan and oven
lamp will turn on. 3. When the door is closed, if User Option OP:60 is selected and the oven is running a manual
or preset cook cycle, the oven will enter Pause Mode. In all other cases, the oven will return to Door Open Mode with User Option OP:61 set. Opening and closing the door will clear out any information about a Manual or Preset Program which was running. 4. In the cooking state, open the oven door. “DOOR OPEN” will display once and then the screen will display the remaining time.
Pause Mode 1. This mode allows a user to temporarily stop the cooking cycle to inspect or stir food. 2. While in Manual Cook Mode or Preset Program Cook Mode, if the door is open and then
closed or if the pause button is pressed, the oven will enter Pause Mode. 3. While paused, the screen will display the remaining cooking time. 4. Pause Mode will cycle into Idle Mode in the same way as Ready Mode and the time settings
can be configured in User Option 4. Additionally, if the “pause” button is pressed, the oven will immediately enter Ready Mode. Or, if the “start” button is pressed, the oven will go into working mode.
11
User Manual
Manual Cook Entry Mode 1. The user may manually enter a cook time and power level while in this mode. 2. While the oven is in the Ready Mode, pressing the “Time Entry” button on the keyboard will
put the oven into Manual Cook Entry Mode. 3. When “00:00” displays in this mode, you can input the time you need. 4. If you press the “Hold 0%,” “Defrost 20%,” “Medium 50%,” or Med-Hi 70%” buttons to select
the power level, the screen will display the related power. If the same button is pressed twice, the power will change to full power. If no power is chosen, full power is the default setting. 5. During setting process, press “start” to enter Manual Cook Mode. Press “pause” to enter Ready Mode.
Manual Cook Mode 1. This mode allows cooking of the food items. While in Manual Cook Entry Mode, pressing
the “start” button will cause the oven to begin Manual Cook Mode. 2. In this mode, the remaining cooking time shows on the display. The fan and oven light will
also run. 3. When the cooking program finishes, the oven will enter End of Cook Cycle Mode. If you
press the “pause” button under this mode, the oven will enter Pause Mode.
End-of-Cook-Cycle Mode 1. After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode, the
oven will enter End of Cook Cycle Mode. 2. During this mode, “DONE” displays. 3. If either User Option OP:11 or OP:12 is selected, the oven shall continue to sound until the
user acknowledges this by either opening and closing the door or pressing the “pause” button. If User Option OP:10 is selected, after the 3 second beep, the oven shall display “DONE”. After the beep, “READY” will display and the oven will enter Idle Mode without any operation for a period of time.
Preset Program Cook Mode 1. This mode allows cooking of food items through a one-button touch operation. While in
Ready Mode, pressing number buttons will cause the oven to run the Preset Program associated with that number button. 2. During this mode, the screen displays the remaining cooking time. When using multi-stage cooking, the total remaining cooking time displays rather than a specific stage cooking time. 3. When the cooking program finishes, the oven will enter End of Cook Cycle Mode. If you press the “pause” button under this mode, the oven will enter Pause Mode.
12
User Manual
On-the-Fly Cooking 1. While oven is cooking, if User Option OP:51 is selected, press the number buttons and
the preset cooking program will start automatically. 2. The screen displays the remaining cooking time. 3. When the cooking program finishes, the oven will enter End of Cook Cycle Mode.
Programming Mode This mode allows the user to assign cook times and power levels to the one-touch buttons. 1. Open the door and press the “1” button for 5 seconds, the buzzer will sound once and enter
Programming Mode: “PROGRAM” displays. 2. Press any number 09 and the screen will display saved time. 3. To change the cooking factor: Press “X2” and the screen will display “CF: XX”. The default
factor is 80% and “CF:08” displays. If you need to change the cooking factor, press one of the number buttons to set. If you press “0”, “CF:10” will display. After setting, press “start” to save, and “PROGRAM” will display. If you do not need to change the cooking factor, please skip this step. 4. Press numbers to input the cooking time. 5. Press “Hold 0%,” “Defrost 20%,” “Medium 50%,” or “MedHi 70%” to input the power level and the screen will display the related power. If the same button has been pressed twice, the power will change to 100%. If no power is chosen, “100%” is the default. NOTE: Set the time first, then choose the power. 6. After setting the time and power, press “start” and the cooking program will be saved. When the program is saved, “PROGRAM” displays. 7. If the cooking time exceeds the maximum time of User Option 7, when pressing “start” button to save the program, the buzzer will sound three times to notify you that the time did not save. Then, the screen will display “PROGRAM.” 8. Close the door and the oven will return to Ready Mode. If you press the “pause” button during the setting process, the oven will return to Door Open Mode. Any unsaved program will be lost. If there is a program saved, you can select the preset number and the program will run. If there is no program saved, the buzzer will sound to signal an error. For example: Set the program as memory cooking. Power level 70% and cooking time is 1 minute and 25 seconds. Step 1: Open the door, press number button “1” for 5 seconds, “PROGRAM” displays. Step 2: Press number button “3,” the screen will display “P:03” after two seconds. Step 3: Press number buttons “1,” “2,” and “5” to input the cooking time. Step 4: Press ” Med-Hi 70% ” button, “1:25 70” displays. Setting finished. Step 5: Press “start” button to save. When you use the program next time, just press “3”
the related program will start. NOTE: · If the electricity is cut off, the saved program will not be lost. · If the program needs to reset, just repeat the above steps. · If you press “pause” at the last step, it will return to Ready Mode and setting will not be saved.
13
User Manual
Double Quantity Cooking 1. If the “X2” button is pressed, the user can set the second cooking time for a particular food item. 2. If the “X2” button is pressed in Ready Mode, followed by the starting of a Preset Program,
or if the “X2” button is pressed within 5 seconds of starting a Preset Program, the oven will start cooking with the quantity preset cooking time. 3. Press “X2” and “DOUBLE” displays. When the number buttons are pressed, the screen will display the quantity preset time. For example: The number button “5” and its preset time is 1 minute. Then press “X2”, and the time will change to 1:00* (1+0.8) = 1:48 (1 minute and 48 seconds). 4. When the cooking program finishes, the oven will enter End of Cook Cycle Mode.
Stage Cooking Programming This mode allows the user to cook food items at Manual Cook Mode and Programming Mode. 1. Three stages can be set at most under Cooking Mode or Programming Mode. After setting
the power and time for the first stage, press “Time Entry” to set the second stage. Repeat to set the third stage. 2. When setting the second or third stage, press “Time Entry,” “STAGE-2,” or “STAGE-3” displays. 3. Press the “start” button to begin cooking. Example: In Programming Mode, press number button “3” to set two stages of cooking. The first stage is 70% and time is 1 minute, 25 seconds. The second stage is 50% and 5 minutes, 40 seconds. The steps are as follows:
A.) Open the door. Press number button “1” for 5 seconds. “PROGRAM” displays. B.) Press number button “3,” the screen will display “P:03.” After two seconds, the
screen will display the related time “:30.” C.) Press “1,” “2,” “5” to input the cooking time. “1:25” displays. D.) Press “Med-Hi 70%,” “1:25 70” displays. The first stage is finished. E.) Press “Time Entry,” “STAGE- 2” displays. F.) Press “5,” “4,” “0” button, “5:40” displays. G.) Press “Medium 50%,” “5:40 50” displays. The second stage is finished. H.) Press “start” button to save.
User Option Mode This mode allows the user to choose various ways for the oven to operate. 1. To enter this mode, open the oven door and press the “2” button for 5 seconds until the
buzzer sounds once. 2. The screen will display “OP:–.” 3. Press any number button to enter related mode setting. For example: To set the voice of the
buzzer to medium, press “2,” “OP:22” displays. If you want to change, keep pressing “2,” the screen displays “OP:20,” “OP:21,” “OP:22,” “OP:23,” “OP:20” …..in cycle. 4. Press “start” to save the current setting. After being saved, “OP: – -” will display again.
14
User Manual
5. During the setting process, press “pause” to enter Door Open Mode. Closing the door will enter Ready Mode. 6. If the “start” button is not pressed at the last step, the program will not be saved. Factory Default Setting In the Ready Mode, pressing “start” will restore factory-default settings. 1. Press “start” and “0.” The buzzer will sound once and the screen will display “CHECK.” If the microwave is in the
factory-default setting, the screen will display “11” after three seconds. Then, the oven will cycle to the Ready Mode. Press “pause” to cancel the display and go back a step on the display. If the microwave oven is not in the factory-default setting, the screen will display “00.” Press “start” to enter factorydefault settings and the screen will display “CLEAR.” The buzzer sounds once after a self-test and the screen will then display “11” or “00.” 2. If you do not press “start” when the display is “00,” the setting will cancel. NOTE: Be careful in the operation as it will restore all configurations to factory-default settings.
15
How to Remove & Install the Filter
User Manual
Loosen the screws by turning counterclockwise.
Remove the filter.
To reinstall, align the base plate mounting holes, replace the screws, and turn clockwise to tighten.
Installation (supplement)
1. The switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorable voltage supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system impedance Zmax of 0.2 Ohms at the interface point of the user’s supply. The user has to ensure that this device is connected only to a power supply system which fulfills the requirement above. If necessary, the user can ask the public power supply company for the system impedance at the interface point.
2. If there is no equipotential bonding conductor in the electric supply, an external equipotential bonding conductor must be installed at the rear of the appliance (see symbol). This terminal shall be in effective electrical contact with all fixed exposed metal parts and shall allow the connection of a conductor having a nominal cross-sectional area up to 10 mm².
Symbol for the external connection of equipotential bonding conductors.
16
User Manual
Troubleshooting
For problems with the microwave oven, please use the chart below to find a solution for each issue.
Problem
Possible Cause
Oven will not start
A. Electrical cord is not plugged in. B. Door is open. C. Wrong operation is set.
Arcing or sparking
A. Materials to be avoided in oven were used. B. The oven is empty. C. Spilled food remains in the cavity.
Unevenly cooked foods
A. Materials to be avoided in oven were used. B. Food is not defrosted completely. C. Cooking time and power level are not suitable. D. Food is not turned or stirred.
Overcooked foods
Cooking time and power level are not suitable.
Undercooked foods
A. Materials to be avoided in oven were used. B. Food is not defrosted completely. C. Oven ventilation ports are restricted. D. Cooking time and power level are not suitable.
Improper defrosting
A. Materials to be avoided in oven were used. B. Cooking time and power level are not suitable. C. Food is not turned or stirred.
The screen display is “E-01” or “E-02″
Temperature sensor breakdown.
The screen display is High temperature in the oven will activate over”OVEN IS HOT, DO NOT heating protection. OPEN THE DOOR”
Lamp light and fan
—
make noise when the
oven finishes working
Solution A. Plug into outlet. B. Close door and try again. C. Check instructions.
A. Use microwave safe cookware only. B. Do not operate with oven empty. C. Clean with wet towel.
A. Use microwave safe cookware only. B. Completely defrost food. C. Use correct cooking time and power level. D. Turn or stir food.
Use correct cooking time and power level.
A. Use microwave safe cookware only. B. Completely defrost food. C. Correct ventilation ports. D. Use correct cooking time and power level.
A. Use microwave safe cookware only. B. Use correct cooking time and power level. C. Turn or stir food.
Unplug, then plug in again after 10 seconds.
Wait for 3 minutes, and then oven can eliminate faults automatically. Remember, do not overheat food, do not work without food in oven, and clean vent if it is blocked.
This is normal.
17
Documents / Resources
 |
Solwave 180MW1200TA Push Button Controls [pdf] User Manual 180MW1200TA, 180MW1800TH, 180MW2100TH, 180MW1200TA Push Button Controls, 180MW1200TA, Push Button Controls, Button Controls, Controls |