PDQ 6400C and 6400CF CVR Exit

DEVICE

MACHINE SCREWS:
USE #7 OR 13/64″ DRILL AND 1/4-20 TAP

NOTES:

1. VERIFY PRINTED TO SCALE
2. SEE TRIM TEMPLATE (IF APPLICABLE) FOR RELATED MACHINING DETAILS
3. DIMENSION “X” SIZED FOR DOOR. REFER TO DEVICE INSTRUCTIONS WHEN CUTTING DOWN FOR A NARROWER OPENING
4. CHECK PDQ WEBSITE FOR THE MOST RECENT REVISION WWW.PDQLOCKS.COM
5. MINIMUM STILE WIDTH: 3-1/2″

INSTALLATION

FOR DOORS WITH 1/2″ THRESHOLD, MEASURE 1-9/16″ TO LOWER THE STRIKE MOUNTING HOLE FROM TOP OF THE THRESHOLD, USE THE UPPER PINHOLE FOR THE BOTTOM LATCH

PDQ Manufacturing2230 Embassy Dr.Lancaster, PA 17603833-273-7832833-2 PDQTECH www.pdqlocks.com

Documents / Resources

PDQ 6400C and 6400CF CVR Exit [pdf] Instruction Manual 6400C and 6400CF CVR Exit, 6400C CVR Exit, 6400C, 6400CF CVR Exit, 6400CF, CVR Exit

References

• User Manual