PDQ 6300D Dummy Exit Device
DEVICE
| MACHINE SCREWS: USE #7 OR 13/64″ DRILL AND 1/4-20 TAP |
| WOOD SCREWS: USE 5/32″ DRILL |
| SEX NUTS: USE 3/8″ DRILL PULL SIDE USE 9/32″ DRILL PUSH SIDE |
NOTES:
- VERIFY PRINTED TO SCALE
- SEX NUTS MAY BE REQUIRED
FOR UNREINFORCED DOORS OR COMPOSITE FIRE DOORS.
CONSULT DOOR MANUFACTURER’S RECOMMENDATIONS - DIMENSION “X” SIZED FOR DOOR.
REFER TO DEVICE INSTRUCTIONS WHEN CUTTING DOWN FOR NARROWER OPENING - MINIMUM STILE WIDTH: 3″
- CHECK PDQ WEBSITE FOR MOST RECENT REVISION
WWW.PDQLOCKS.COM
PDQ Manufacturing
2230 Embassy Dr.
Lancaster, PA 17603
833-273-7832
833-2 PDQTECH
www.pdqlocks.com
Documents / Resources
 |
PDQ 6300D Dummy Exit Device [pdf] Instructions 6300D Dummy Exit Device, 6300D, Dummy Exit Device |
