WA-LAPMIC2P limited Device Database
Specifications:
- Model: XYZ-2000
- Power: 1200W
- Capacity: 2 liters
- Material: Stainless steel
- Dimensions: 10 x 12 x 8 inches
Product Information:
The XYZ-2000 is a high-quality electric kettle designed for fast
and efficient boiling of water. With a power rating of 1200W, it
can quickly heat up 2 liters of water in its stainless steel
container. The compact dimensions of 10 x 12 x 8 inches make it
suitable for various kitchen settings.
Usage Instructions:
1. Initial Setup:
Before using the XYZ-2000 for the first time, make sure to clean
it thoroughly with warm soapy water and rinse it well.
2. Filling the Kettle:
Open the lid of the kettle and fill it with water up to the
desired level. Do not overfill beyond the maximum capacity of 2
liters.
3. Boiling Water:
Place the kettle on its base and plug it into a power source.
Press the power button to start the boiling process. The kettle
will automatically turn off once the water reaches boiling
point.
4. Pouring and Serving:
Once the water is boiled, carefully pour it out using the spout
into your cup or teapot. Ensure that you handle the hot kettle with
caution to prevent burns.
FAQ:
Q: Can I use the kettle to boil liquids other than water?
A: It is recommended to only use the XYZ-2000 for boiling water
to maintain its performance and longevity.
Q: How do I clean the kettle?
A: To clean the kettle, unplug it and let it cool down. Wipe the
exterior with a damp cloth and use a mild detergent to clean the
interior. Rinse thoroughly and dry before next use.
<C ©
APP Vlog
..
,
,:
F
ID
‘ 1. J —
4 g 8
l – 3f
)
G)
©
Type-CD
k1
K2
l Type-C
— APP
OPPO/OVTIVGO./IQOOO/TGo{lme
UI
35
3S
K2
li!Kl
C
1
2
15
(1) (2) (3)
(4)Type-C (5)
Wireless Microphone
User Manual
0 © MAXINCHINA
Introduction
Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program Interview, recording, video teaching and other occasions
This product consists of three parts: charging box, microphone transmitter and receiver (as shown in the figure below, some models have no charging box, Based on the actual object)
1
; f —-
·`–
Charging box
Microphone Receiver transmitter
ID Diagram
(1) ;,:
G)Windproof Net
Q) Connectkln indicator light
G) Mute indicator light
@ Noise reduction indicator light Battery indicator @Microphone Type-c charging port Microphone clip
@ Power on/off/mute button K1
@Futkln button K2 @porttoIphone @ portof iver @ Indicator light Q) Charging box Type-C charging port
Chargingbox indicator
How to use
Step 1: Long press the power button oo the microphone, and the connection indicator light wiash, indicag successful powe on Step 2: Connect one end of the receiving end to the phone interface Step 3: The indicator light for the connection between the receiver and transmitter emains oo, indicating a successful connection Open the camera live streaming app on your phooe and use the microphone to listen
Switch key
J-tdicator Light
‘always on Nole: oppo/vivo/ iqoo/realmbrand mobile phones can be
used normally o nlywhen they go to the set tings (search’OTG’- t urn on OTG power supply)
About UI
Microphone Transmitter
Function Button
J”Ul on
Poworoff r
Silent mode
“”3S” g fl”3S 1-.n
Ckon e’KllionK2
C
hK1
“J.ulU “mtm
Crging
L.owal
Receiver
Function
| Opete
coon1ml”
omned2mlUo,
Packing List
Content of packing (1) Microphone transmitter
(2) Lightning receiver (3) Charging box
LED
Connor light
AJIIIbam MM u`eoo,IrI: ‘TM huononm m dIfoll “|mo nd”bMM
m
W”e. m.J’m .1. ‘.,”. ‘”U.r'”.”t.l”`”~m’1 U..l”. I.,m”d
ILED
(4) Charging cable (5) User manual
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
Oldshark WA-LAPMIC2P limited Device Database [pdf] User Manual 2A2HV-WA-LAPMIC2P, 2A2HVWALAPMIC2P, WA LAPMIC2P, WA-LAPMIC2P limited Device Database, WA-LAPMIC2P, limited Device Database, Device Database, Database |