NORTH SPORE Repeat Cycle Timer Instructions

Repeat Cycle Timer
Instructions

Repeat Cycte Timer Instructions- Side A

Contents hide

1 PRODUCT OVERVIEW:

2 TECHNICAL SPECIFICATIONS:

3 OPERATION INSTRUCTIONS:

4 Documents / Resources

4.1 References

PRODUCT OVERVIEW:

Quality product at an affordable price. The Spartan Series repeat cycle timer is perfect for £02 cantrol, pumps, fans and other 120 Volt appliances. Features a 5 second to 30 ‘minute ‘ON” time and 5 second to 60 minute “OFF’ time and a buit in photocel for day or might use. Simpl o operate and easy 1o use.
Timer is set in 24 Hour Control Mode. Refer 1o side B to set in Day or Night mode.

TECHNICAL SPECIFICATIONS:

Voltage: 125 Volt
Hertz: 60Kz

Max Operating Amps: 15 Amps Resistive Load
Operating temperature: 32°F – 122°F (0°-50° )

Includes 1 year repair or replacement warranty. For technical assistance call 888-808-4826 from Mon-Fri 8 AM-5 PM PST. Go to www.titancontrols.net for more information.

OPERATION INSTRUCTIONS:

Step 1
Setting ‘ON” & ‘OFF’ times for repeat cycle timer.
A. Rotate knob to set ‘ON” time.B. Rotate knob to set ‘OFF’ time.Step2
Plug ito outlet and appliance will cycle ‘ON’ then ‘OFF’ using current timer settings.Continue to other side for Step 3.Repeat Cycte Timer Instructions- Side B
CHANGING MODES:
Step3
Sty ehour cantrolA. Adjust both top & bottom knabs 1o mininu settings
B. Plgin, then rutate top & bottom knobs to maximum sstting within 5 seconds.
C. The ‘Output On’ LED activates bas on timer ssttings.
Set to DAY control:A. Adjust both top & bottom knabs 1o mininu settings
B. Pugin, then rotate top nob o minkum, then bottom knob to minimum settings ithin 5 seconds.
C. The ‘Output On’ LED activates based on timer sattings.
Set to NIGHT control:A Adjust both top & bottom knobs to ‘maximum sattings.
B. Pugin, then rotate ottom knob to minimum, then top knob to miimum settings withi 5 seconds.
C. The ‘Output On’ LED activates based on timer sattings.