NORDIC AM18051HDMI Wireless Display Transmitter and Receiver

Introduction

Brief
This document provides an overview of the requirements for the AM 18051 HDMI cale. It is a pair of Full HD wireless display transmitters & receiver. It integrates a powerful video encoder decoder and 5GhzWi-Fi 1110dule with high sensitivity antennas to provide the high-performance

Transmitter
Main Chip	AM8360D
Model	AM18051HDMI cable Transmitter
Network	IEEE 802.11n 5GHz 1T1R
Interface	USB Type-C DP-ALT
Max. Resolution	1920×1080
Function	Screen Mirror/Extend
Color	White
Power	DC5V/0.5A

Receiver
Model	AM18051HDMI cable Receiver
Main Chip	AM8268D
Network	IEEE 802.11n 5GHz 1T1R
Interface	HDMI
Max. Resolution	1920×1080
Function	Screen Mirror/Extend
Color	White
Power	DC5V/0.5A

Product Feature

• Wi-Fi:
• IEEE 802.1 In 5GHz ITIR
• Full HI) Output
• Scrccn Mirror
• Screen Extend (Windows/macOS)
• Netflix App support (The standalone receiver cannot display DRM streaming)
• Proprietary Protocol
• Long Distance
• Low Power Consumption
• Low Latency
• CSA (Channel switch announcement) supported, auto channel switch if current channel jamming.

Installation

1. Receiver : Connect Receiver to your TV and power on by an independent 5V/1A adapter.
2. Transmitter : Power and connect the HDMI connector to your
3. Laptop/MacBook/ Smart Phone supporting USB Type-C DP-Alt port. Wait a few seconds
4. until the flashing light of Transmitter stops, then it will start mirroring automatically.
5. Stop/Restart Mirror: Unplug/ Re-plug Transmitter to stop mirroring or restart mirroring

Manually Pair (If needed)

1. Turn on pairing mode for the receiver
   1. Power up the receiver by an extemal adapter (5 V IA).
   2. Plug the receiver to the HDMI polt on the monitor.
   3. Press the button through the pin hole on the receiver for 2 seconkls. Release when the screen shows “Release the button to pair with”.
      
2. Press the button on Transmitter
   Plug Transmitter on laptop to provide power. Press the button through the pine hole on
   Transmitter for 5 seconds to complete pairing while the screen shows

Requirements

The following sections is to identify the detailed requirements of the Transmitter and Receiver.

Hardware Specification

Blain Component

Transmitter	Hardware Component	Detailed Description
2.1.1.1	Main Chip	AM8360D
2.1.1.2	Wi-Fi	AM9421
Receiver
2.1.1.4	Main Chip	AM8268D
2.1.1.5	Wi-Fi	AM9421

Hardware Interface

Transmitter	Feature	Detailed Description
2.1.2.1	HDMI Interface USB Interface	HDMI 1.4a with HDCP 1.4 Only for power input (5V/1A USB adapter)
2.1.2.2	Button (Pin hole)	Press 5s for paring the Receiver as the
Receiver
2.1.2.3	HDMI Interface	HDMI 1.4a with HDCP 1.4
2.1.2.4	USB Interface	Only for power input (5V/1A USB adapter)
2.1.2.5	Button (Pin hole)	Press 5s to start the pairing process

LED Indicator for

Transmitter	Status	Detailed Description
LED Light	Solid	Device is connected to RX successfully and is able to be operated properly.
	Blinking (Slow)	The device is ready and trying to connect to RX as Receiver is being connected up.
	Blinking (Fast)	The device is processing to pair with RX.
	Light off	The device has malfunctioned, OR no power input.
Receiver
LED Light	Solid	Device is connected to 5V/1A power successfully.

Electrical Characteristic

Transmitter	Feature	Detailed Description
2.1.4.1	Power Input	5V/0.5A
2.1.4.2	Power Consumption	2.5 W
Receiver
2.1.4.3	Power Input	DC 5V/0.5A
2.1.4.4	Power Consumption	2.5W

Mechanical Requirements

Dimension

Transmitter

 

Receiver

Package Specification

Transmitter	Feature	Detailed Description
2.2.2.1	Length	99mm
2.2.2.2	Width	18mm
2.2.2.3	Height	6mm
2.2.2.4	Weight	13g
Receiver
2.2.2.5	Length	677mm
2.2.2.6	Width	17mm
2.2.2.7	Height	6mm
2.2.2.8	Weight	19g

Environmental Requirements

	Feature	Detailed Description
2.3.1	Operating Temperature Conditions	The product is capable of continuous reliable operation when operating in ambient temperature
2.3.2	Non-Operating Temperature Conditions	Neither subassemblies is damaged nor the operational performance be degraded when restored to the operating temperature after exposing to storage temperature in the range of – 2  to +70
2.3.3	Operating Humidity conditions	The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing.
2.3.4	Non-Operating Humidity Conditions	The product is not be damaged nor the performance be degraded after exposure to relative humidity ranging from 5% to 90% non- condensing.

Documents / Resources

NORDIC AM18051HDMI Wireless Display Transmitter and Receiver [pdf] User Guide AM18051, AM18051HDMI Cable, AM18051HDMI Wireless Display Transmitter and Receiver, AM18051HDMI, Wireless Display Transmitter and Receiver, Display Transmitter and Receiver, and Receiver, Receiver

References

• User Manual