Wireless Display Transmitter & Receiver

1.0 Introduction

1.1 Brief

This document provides an overview of the requirements for the AM18051HDMI cable. It is a pair of Full HD wireless display transmitter & receiver. It integrates a powerful video encoder/decoder and 5Ghz Wi-Fi module with high sensitivity antennas to provide the high-performance screen mirroring function.

1.2 Product Feature

• Wi-Fi: IEEE 802.11n 5GHz 1T1R
• Full HD Output
• Screen Mirror
• Screen Extend (Windows/macOS)
• Netflix App support (The standalone receiver cannot display DRM streaming)
• Proprietary Protocol
• Long Distance
• Low Power Consumption
• Low Latency
• CSA (Channel switch announcement) supported, auto channel switch if current channel jamming.

1.3 Installation

1. Receiver: Connect Receiver to your TV and power on by an independent 5V/1A adapter.
2. Transmitter: Power and connect the HDMI connector to your Laptop/MacBook/ Smart Phone supporting USB Type-C DP-Alt port. Wait a few seconds until the flashing light of Transmitter stops, then it will start mirroring automatically.
3. Stop/Restart Mirror: Unplug/ Re-plug Transmitter to stop mirroring or restart mirroring.

1.4 Manually Pair (If needed)

1. Turn on pairing mode for the receiver

• Power up the receiver by an external adapter (5V/1A).
• Plug the receiver to the HDMI port on the monitor.
• Press the button through the pin hole on the receiver for 2 seconds. Release when the screen shows “Release the button to pair with".

Receiver Interface:

HDMI Port

Reset Button (located on the side)

USB Port (power supply)

2. Press the button on Transmitter

Plug Transmitter on laptop to provide power. Press the button through the pin hole on Transmitter for 5 seconds to complete pairing while the screen shows "Ready to pair". After paired, it will start casting automatically.

Transmitter Interface:

HDMI Port

Reset Button (located on the side)

USB Port (power supply)

2.0 Requirements

The following sections identify the detailed requirements of the Transmitter and Receiver.

2.1 Hardware Specification

2.1.1 Main Component

2.1.2 Hardware Interface

2.1.3 LED Indicator for

2.1.4 Electrical Characteristic

2.2 Mechanical Requirements

2.2.1 Dimension

2.2.1.1 Transmitter

Diagram Description: Top view and side view of the transmitter with dimensions indicated. The main body is approximately 29.99mm in length and 18.1mm in width. The cable extends 600mm from the main body, with a connector at the end measuring 26mm in length and 12.2mm in width.

2.2.1.2 Receiver

Diagram Description: Top view and side view of the receiver with dimensions indicated. The main body is approximately 29.99mm in length and 18.1mm in width. The cable extends 600mm from the main body, with a connector at the end measuring 26mm in length and 12.2mm in width.

2.2.2 Package Specification

2.3 Environmental Requirements