NEXBLUE Zen Current Sensor
Product Information
Specifications
- Product Name: NexBlue Zen (Current Sensor)
- Load Balancer for: Non-smart Meter Scenarios
- Key Features:
- Hassle-free smart charging
- Optimizing energy use
- Effortless installation
- Compact and highly compatible
- Measurement up to 1500A
- Dimensions: Not specified in the provided text
- Connectivity:
- Wi-Fi: 2.4 GHz 802.11b/g/n
- Bluetooth: BLE 4.2
- Nexus RF RS-485: TIA/EIA-485A
- Ethernet: ISO/IEEE 802.3u
- Regulations: EU Type Examination Certificate (Module B) confirming compliant with:
- Radio Equipment Directive 2014/53/EU Article 3.1.a: Health and Safety
- Article 3.1.b: EMC
- Article 3.2: Effective use and efficient use of radio spectrum
Product Usage Instructions
- Step 1: Installation
Follow the provided installation guide to set up the NexBlue Zen] Current Sensor in your desired location. - Step 2: Connectivity
Connect the sensor to your preferred network using one of the available connectivity options (Wi-Fi, Bluetooth, RF RS-485, orEthernet). - Step 3: Configuration
Configure the sensor settings as per your requirements for energy optimization and monitoring. - Step 4: Monitoring
Monitor the energy consumption and load balancing using the NexBlue Zen Current Sensor.
Frequ ently Asked Questions (FAQ)
Q: What is the maximum current measurement capacity of the NexBlue Zen Current Sensor?
A: The NexBlue Zen Current Sensor can measure up to 1500A ofcurrent.
NexBlue Zen Product Shee (Current Sensor)
+46 73898196
Sweden Office:5
Sven Rinmans Gata 6,
+47 4007909
112 37Stockholm, Sweden
Norway Office:5
Stemmane 11,
4636 Kristiansand, Norway
General Inquiry Email: info@nexblue.com
NexBlue Zen (Current Sensor)
Load Balancer for Non-smart Meter Scenarios
Hassle-free smart charging
- Uninterrupted charging with DLB even without network
- High penetrability through walls with
- Nexus RF (Radio Frequency)
- Inter-circuit load balancing available through the Cloud in one Location
- Future-proof for communication with energy storage and PV panels
Effortless installation
- No disassembly required.
- No additional APP required.
- No external power adaptor required
- Wired MCB pre-integrated
- 2-minute installation with DIN rail design
Optimizing energy use
- Efficiently monitor and optimize energy use
- via WiFi or Ethernet
- Turn on Solar Surplus Mode to access free,
- Eco-friendly charging with solar panels
- Save cost by setting up household electricity consumption limits during peak hours
- Grasp real-time data from CT clamps, transmit to Cloud and chargers
Compact and highly compatible
- Nexus RF / Wi-Fi / Bluetooth / Ethernet
- Enhanced connectivity with external & extendable antenna
- Supporting installations without smart meters
- With optional Rogowski Coil, current measurement up to 1500A
Dimensions
Technical Information
General
- Model: CS3ANA
- Dimension (mm):
- H:85.8 xW: 27 xD: 66.8
- Weight: 95 g
- Over-voltage category: OVC II
- Insulation class: II
- Voltage measurement range:
- 85-264 V AC
- Rated power: 3 W
- Current measurement range:
- CT clamps (included): ± 0 – 80 A (MAX
- cross-section: 16 mm²)
- Rogowski coil (optional): ±0 – 1500 A
Power supply:
- 85 – 264 V AC, 50Hz
- Installation system: TT, IT or TN
- single to three phase
- Terminals: Grid terminal / solar panel
- terminal / RS-485 / LAN / Wi-Fi terminal /
- power supply terminal
- Mounting: DIN rail
- Warranty: 3 years
Operating conditions
Operating temperature:
- -25°C to +55°C
- Ingress protection: IP30
- Relative humidity: 0 – 90%
- Altitude: 0-2000 m
- Indoor use: Yes
Connectivity
- Wi-Fi: 2.4 GHz 802.11b/g/n
- Bluetooth: BLE 4.2
- Nexus RF
- RS-485: TIA/EIA-485A
- Ethernet: ISO/IEEE 802.3u
Regulations:
- EU Type Examination Certificate
- (Module B) confirming compliant with:
- Radio Equipment Directive 2014/53/EU
- Article 3.1.a: Health and Safety
- Article 3.1.b: EMC
- Article 3.2: Effectively uses and efficient use of radio spectrum
2024 NexBlue. All rights reserved.
Documents / Resources
![]() |
NEXBLUE Zen Current Sensor [pdf] Instruction Manual Zen Current Sensor, Current Sensor, Sensor |
![]() |
NEXBLUE Zen Current Sensor [pdf] User Guide Zen Current Sensor, Zen, Current Sensor, Sensor |
![]() |
NEXBLUE Zen Current Sensor [pdf] Installation Guide Zen Current Sensor, Zen, Current Sensor, Sensor |