NEXBLUE-LOGO

NEXBLUE Zen Current Sensor

NEXBLUE-Zen-Current-Sensor-PROFCUCT

Product Information

Specifications

  • Product Name: NexBlue Zen (Current Sensor)
  • Load Balancer for: Non-smart Meter Scenarios
  • Key Features:
    • Hassle-free smart charging
    • Optimizing energy use
    • Effortless installation
    • Compact and highly compatible
    • Measurement up to 1500A
  • Dimensions: Not specified in the provided text
  • Connectivity:
    • Wi-Fi: 2.4 GHz 802.11b/g/n
    • Bluetooth: BLE 4.2
    • Nexus RF RS-485: TIA/EIA-485A
    • Ethernet: ISO/IEEE 802.3u
  • Regulations: EU Type Examination Certificate (Module B) confirming compliant with:
    • Radio Equipment Directive 2014/53/EU Article 3.1.a: Health and Safety
    • Article 3.1.b: EMC
    • Article 3.2: Effective use and efficient use of radio spectrum

Product Usage Instructions

  1. Step 1: Installation
    Follow the provided installation guide to set up the NexBlue Zen] Current Sensor in your desired location.
  2.  Step 2: Connectivity
    Connect the sensor to your preferred network using one of the available connectivity options (Wi-Fi, Bluetooth, RF RS-485, orEthernet).
  3. Step 3: Configuration
    Configure the sensor settings as per your requirements for energy optimization and monitoring.
  4. Step 4: Monitoring
    Monitor the energy consumption and load balancing using the NexBlue Zen Current Sensor.

Frequ ently Asked Questions (FAQ)
Q: What is the maximum current measurement capacity of the NexBlue Zen Current Sensor?
A: The NexBlue Zen Current Sensor can measure up to 1500A ofcurrent.

NexBlue Zen Product Shee (Current Sensor)

+46 73898196
Sweden Office:5
Sven Rinmans Gata 6,
+47 4007909
112 37Stockholm, Sweden
Norway Office:5
Stemmane 11,
4636 Kristiansand, Norway
General Inquiry Email: info@nexblue.com

NexBlue Zen (Current Sensor)

Load Balancer for Non-smart Meter Scenarios

NEXBLUE-Zen-Current-Sensor- (2)

NEXBLUE-Zen-Current-Sensor- (3)Hassle-free smart charging

  • Uninterrupted charging with DLB even without network
  • High penetrability through walls with
  • Nexus RF (Radio Frequency)
  • Inter-circuit load balancing available through the Cloud in one Location
  •  Future-proof for communication with energy storage and PV panels

NEXBLUE-Zen-Current-Sensor- (4)Effortless installation

  • No disassembly required.
  • No additional APP required.
  • No external power adaptor required
  • Wired MCB pre-integrated
  • 2-minute installation with DIN rail design

NEXBLUE-Zen-Current-Sensor- (5)Optimizing energy use

  • Efficiently monitor and optimize energy use
  • via WiFi or Ethernet
  • Turn on Solar Surplus Mode to access free,
  • Eco-friendly charging with solar panels
  • Save cost by setting up household electricity consumption limits during peak hours
  • Grasp real-time data from CT clamps, transmit to Cloud and chargers

NEXBLUE-Zen-Current-Sensor- (6)Compact and highly compatible

  • Nexus RF / Wi-Fi / Bluetooth / Ethernet
  • Enhanced connectivity with external & extendable antenna
  • Supporting installations without smart meters
  • With optional Rogowski Coil, current measurement up to 1500A

Dimensions

NEXBLUE-Zen-Current-Sensor- (1)

Technical Information

General

  • Model: CS3ANA
  • Dimension (mm):
  • H:85.8 xW: 27 xD: 66.8
  • Weight: 95 g
  • Over-voltage category: OVC II
  • Insulation class: II
  • Voltage measurement range:
  • 85-264 V AC
  • Rated power: 3 W
  • Current measurement range:
  • CT clamps (included): ± 0 – 80 A (MAX
  • cross-section: 16 mm²)
  • Rogowski coil (optional): ±0 – 1500 A

Power supply:

  • 85 – 264 V AC, 50Hz
  • Installation system: TT, IT or TN
  • single to three phase
  • Terminals: Grid terminal / solar panel
  • terminal / RS-485 / LAN / Wi-Fi terminal /
  • power supply terminal
  • Mounting: DIN rail
  • Warranty: 3 years

Operating conditions

Operating temperature:

  • -25°C to +55°C
  • Ingress protection: IP30
  • Relative humidity: 0 – 90%
  • Altitude: 0-2000 m
  • Indoor use: Yes

Connectivity

  • Wi-Fi: 2.4 GHz 802.11b/g/n
  • Bluetooth: BLE 4.2
  • Nexus RF
  • RS-485: TIA/EIA-485A
  • Ethernet: ISO/IEEE 802.3u

Regulations:

  • EU Type Examination Certificate
  • (Module B) confirming compliant with:
  • Radio Equipment Directive 2014/53/EU
  • Article 3.1.a: Health and Safety
  • Article 3.1.b: EMC
  • Article 3.2: Effectively uses and efficient use of radio spectrum

2024 NexBlue. All rights reserved.

Documents / Resources

NEXBLUE Zen Current Sensor [pdf] Instruction Manual
Zen Current Sensor, Current Sensor, Sensor
NEXBLUE Zen Current Sensor [pdf] User Guide
Zen Current Sensor, Zen, Current Sensor, Sensor
NEXBLUE Zen Current Sensor [pdf] Installation Guide
Zen Current Sensor, Zen, Current Sensor, Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *