S05T Temperature Logger
“
Product Specifications
S05T Temperature Logger
Version: 1.0
Manufacturer: MOKO TECHNOLOGY LTD.
General Specifications
| Dimensions (L*W*H) | 49.6mm * 28.8mm * 4.7mm |
|---|---|
| IP rated | IP67 |
| Color | White |
| Installation | Sticker |
| Material | EVA, PVC |
| Bluetooth | BLE 5.0 |
Product Usage Instructions
1. Installation
To install the S05T Temperature Logger, follow these steps:
- Peel off the sticker backing.
- Place the device in the desired location.
- Press firmly to ensure secure adhesion.
2. Data Retrieval
To retrieve temperature data from the logger:
- Connect the device to a compatible device via Bluetooth.
- Access the data through the designated application.
3. Battery Replacement
If the battery needs replacement:
- Locate the battery compartment on the device.
- Replace the battery with a compatible one.
- Ensure proper battery orientation before closing the
compartment.
Frequently Asked Questions (FAQ)
Q: Can the S05T Temperature Logger be submerged in water for an
extended period?
A: While the product has IP67 waterproof
performance, it is not recommended to submerge it for a long time
due to material characteristics.
Q: What is the battery lifespan of the S05T Temperature
Logger?
A: The default setting provides a battery
lifespan of 2 years.
Q: How many sets of temperature data can be stored in the
device?
A: The device supports storage of up to 60000
sets of temperature data with a 512K Bytes external flash.
“`
Product Specification
S05T Temperature Logger
Version 1.0
1 Copyright © 2023 MOKO TECHNOLOGY LTD.
MOKO TECHNOLOGY LTD.
Revision History
Version Data
Notes
V1.0
Jan 17, 2025 Initial version
S05T Temperature Logger Product Specification V1.0
Contributor(s) Leo
About document
This product specification was designed to help users to know the hardware overview and feature instructions of S05T Temperature Logger Products. Through this document, users will be initial to understand the application scenarios, hardware specifications, as well as basic instructions of product.
1 Copyright © 2025 MOKO TECHNOLOGY LTD.
S05T Temperature Logger Product Specification V1.0
Table of Contents
1. Overview ……………………………………………………………………………………………………………………………. 3 2. Product brief ………………………………………………………………………………………………………………………..4 3. General specifications ……………………………………………………………………………………………………………5
3.1 Hardware specifications ………………………………………………………………………………………………………………………. 5 3.2 Lifecycle estimation ………………………………………………………………………………………………………………………………6 3.3 LED functionality ………………………………………………………………………………………………………………………………….6 4. Basic instructions …………………………………………………………………………………………………………………. 7 4.1 How to power ON/OFF device? ………………………………………………………………………………………………………………7 4.2 How to restore factory settings? …………………………………………………………………………………………………………….7
2 Copyright © 2025 MOKO TECHNOLOGY LTD.
S05T Temperature Logger Product Specification V1.0
1. Overview
This Product specification is mainly applicable for MOKO S05T Temperature Logger Products, and mainly contained below parts:
Product brief General specifications Basic instructions For more information about user guidance of product functions and configuration APP, please contact our sales team directly for official document.
3 Copyright © 2025 MOKO TECHNOLOGY LTD.
S05T Temperature Logger Product Specification V1.0
2. Product brief
S05T Temperature Logger is a disposable temperature logger distinguished by its low cost, lightweight design, and customizable flexibility. This logger efficiently captures temperature data during asset storage and throughout the whole transportation process, while simultaneously tracking its real-time location and temperature information. Moreover, it boasts a capacity to store up to 60,000 groups of sensor data. This data, whether stored or in real-time, can be uploaded to the cloud via trackers or BLE gateways for continuous monitoring. Additionally, using MOKO’s standard app, customers can connect to the device to export historical temperature data and analysis reports in Excel format as required.
Figure 1: Appearance overview of S05T Temperature Logger
4 Copyright © 2025 MOKO TECHNOLOGY LTD.
S05T Temperature Logger Product Specification V1.0
3. General specifications
3.1 Hardware specifications
General specifications of S05T Temperature Logger
Dimensions(L*W*H)
49.6mm*28.8mm*4.7mm
IP rated
IP67
Physical
Color
White
Installation
Sticker
Material
EVA, PVC
Bluetooth
BLE 5.0
MCU
Silicon Labs series
Connectivity
Maximum Tx Power Long range mode*
+6dBm Yes
Transmission range*
Legacy mode – 150 meters Long range mode 350 meters
Accelerometer sensor
Optional
Temperature sensor
Accuracy tolerance : ±0.5°C ~ ±0.2°C (-30 °C~ 0°C) ±0.2°C (0 °C~ 60°C)
Humidity sensor
No
Hardware
LED External Flash
1*Green LED + 1*Red LED 512K Bytes (Supports storage of 60000 sets of temperature data)
Battery Capacity
220mAh
Battery lifespan
2 years (Default setting*)
Replaceable battery
No
Operating temperature
-30°C ~ 60°C
Regulatory
Certifications
FCC | CE | RoHS | REACH
Table 1: Hardware specifications of S05T Temperature Logger ———————————————————————————————————————————————————–
Transmission range*: Tested in the open area and no obstacles in the route.
Long range mode*: Means “Coded PHY advertising mode”.
Default setting*: The S05T Temperature Logger lifetime estimated based on standard working mode under 25°C conditions.(0dBm Tx Power | 3000ms ADV interval | 10s sampling interval | No accelerometer sensor)
Remark:
1. Please do not tear the shell of the product, so as not to affect the waterproof performance of the product
2. Although the product has IP67 waterproof performance, but due to the characteristics of the product material, it is not recommended to let the product for a long time in a state of submerged water, otherwise the product may be damaged.
5 Copyright © 2025 MOKO TECHNOLOGY LTD.
S05T Temperature Logger Product Specification V1.0
3.2 Lifecycle estimation
Please refer to documents “MOKO Beacon_Battery Lifecycle summary” for more details on battery lifecycle.
3.3 LED functionality
Here we have described the LED response status in some common situations.
Scenarios Power ON Device connect
Device status checking
Power OFF Hardware reset Software reset DFU upgrade Low battery LED notification Remote reminder
LED response status
LED color Response
Green Green
Green / Red
Red Red Red Red Red
Blinking for 3 seconds
Blinking twice
Single click the button, the led will solid for 1 second according to the device status. ————————————————————————————————————–
If the temperature trigger broadcast function is enabled. Single click the button, the Green led solid for 1 second Indicates that no trigger events have occurred on the device during the work period. Single click the button, the Red led solid for 1 second indicates that a trigger event has occurred on the device during the work period.
———————————————————————————————————— If the temperature trigger broadcast function is disabled.
Single click the button, the Green led solid for 1 second Indicates that the device is in the power-on operating state.
Single click the button, the Green led is not working, indicates that the device is turned off or the device is out of power.
Solid for 3 seconds
Solid for 3 seconds and then device reboot
Solid for 3 seconds and then device reboot
Blinking during DFU upgrade, and solid for 3 seconds after done
Blinking twice every 10 seconds
Red
Customized notification mechanism
Red
Customized notification mechanism
Table 2: LED response status in various situations
6 Copyright © 2025 MOKO TECHNOLOGY LTD.
4. Basic instructions
S05T Temperature Logger Product Specification V1.0
4.1 How to power ON/OFF device?
Power ON: Long press the button, hold on for 3 seconds and then Green LED will keep blinking for 3 seconds to indicate device power on status. Power OFF: Long press inner button, hold on for 3 seconds and then Red LED will keep solid for 3 seconds to indicate device power off status. Remark: The device does not support power-off via button by default. If you need this feature, you can enable it by modifying the parameters through the app.
4.2 How to restore factory settings?
There have two ways to restore factory settings. Software reset: Connect with device through configuration APP and then execute “Reset Beacon” operations to
finish the software reset. Hardware reset: Long press the back button for 10s or more, then release button and single press back button
again within 2s, then device will proceed on factory reset, along with the red LED solid for 3 seconds. At last, Device will reboot and the green LED start flashing for 3 seconds to indicate the factory reset success.
Figure 2: How to reset S05T Products? Remark: 1. Software reset won’t reset connection password. 2. The hardware factory reset feature is enabled by default. If you don’t need this function, you can disable it through the APP.
7 Copyright © 2025 MOKO TECHNOLOGY LTD.
S05T Temperature Logger Product Specification V1.0
© Copyright 2025 MOKO TECHNOLOGY. All Rights Reserved. Any information furnished by MOKO TECHNOLOGY LTD. is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of MOKO TECHNOLOGY LTD. materials or products rests with the end user since MOKO TECHNOLOGY LTD. cannot be aware of all potential uses. MOKO TECHNOLOGY LTD. makes no warranties as to non-infringement nor as to the fitness, merchantability, or sustainability of any MOKO TECHNOLOGY LTD. materials or products for any specific or general uses. MOKO TECHNOLOGY LTD. or any of its affiliates shall not be liable for incidental or consequential damages of any kind. All MOKO TECHNOLOGY LTD. products are sold pursuant to the MOKO TECHNOLOGY LTD. Terms and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. Other marks may be the property of third parties. Nothing herein provides a license under any MOKO TECHNOLOGY LTD. or any third-party intellectual property right. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Contact
MOKO TECHNOLOGY LTD. An original manufacturer for IoT smart devices
Address: 4F, Building 2, Guanghui Technology Park, MinQing Rd, Longhua, Shenzhen, Guangdong, China
E-mail: Support_BLE@mokotechnology.com
Website: www.mokosmart.com
www.mokoblue.com
8 Copyright © 2025 MOKO TECHNOLOGY LTD.
Documents / Resources
 |
MOKO SMART S05T Temperature Logger [pdf] Owner's Manual S05T, S05T Temperature Logger, Temperature Logger, Logger |