MIGATRONIC MIG-A-Twist Smart Torch Module

OVERVIEW

• Smart Torch module with 2 buttons (80100432)
• Smart Torch module with 4 buttons (80100431)
• Graphical Smart Torch module with 4 buttons (80100430)

HOW TO USE

Note:

• Smart Torch modules are only compatible with Sigma Select/One/Core and/or
• Automig 300 Pulse power sources equipped with wire feeder PCB 71613664 version C1 and later. For earlier versions – please contact your Migatronic Service Partner.
• Software package 4.0 must be installed in the machine.
• Software can be downloaded from http://migatronic.com

BASIC / GRAPHICAL Manual MIG/MAG

GRAPHICAL Synergic MIG/MAG

BASIC Manual MIG/MAG

GRAPHICAL Manual MIG/MAG

• a. Voltage (default)
• b. Arc-adjust
• c. Sequence
• d. Disabled
• a. Voltage trim (default)
• b. Arc-adjust
• c. Sequence 
• d. Disabled

Selection of functions GRAPHICAL

Torch setup 

1. Home/return Return to menu
2. Change wire feeder unit
3. Selection of functions Selection of function/setting that should be controlled by the 2 key pads at the button.
4. Selection of water cooling
5. Confirm modifications

Selection of functions 

1. Home/return Return to menu
2. Confirm choice of function
3. Function list:
   • Voltage (default)
   • Arc-adjust
   • Sequence
   • Disabled

BASIC Manual MIG/MAG

GRAPHICAL Manual MIG/MAG

SIGMA SELECT – GRAPHICAL Synergic MIG/MAG

SIGMA ONE – GRAPHICAL Synergic MIG/MAG

AUTOMIG PULSE – GRAPHICAL Synergic MIG/MAG

MigaJOB 

Torch setup 

1. Home/return Return to menu
2. Change wire feeder unit
3. MigaJOB index
4. Selection of water cooling
5. Confirm modifications

MigaJOB index

1. Home/return Return to menu
2. Delete job from index
3. Add job for index
4. Index list Up to 9 jobs

Selection of job

Specifications

• Smart Torch module with 2 buttons (80100432)
• Smart Torch module with 4 buttons (80100431)
• Graphical Smart Torch module with 4 buttons (80100430)

Note: Compatible with Sigma Select/One/Core and/or Automig 300 Pulse power sources equipped with wire feeder PCB 71613664 version C1 and later. Software package 4.0 must be installed.

FAQS

Q: Can I use the Smart Torch module with any welding machine?
A: No, the Smart Torch modules are only compatible with specific Migatronic power sources mentioned in the manual.

Q: How can I download the required software package?
A: You can download the software package 4.0 from http://migatronic.com

Q: What functions are available on the Smart Torch modules?
A: The modules offer functions such as wire feed speed adjustment, welding current control, voltage settings, arc adjustment, sequence selection, and more. Refer to the manual for specific details.

Documents / Resources

MIGATRONIC MIG-A-Twist Smart Torch Module [pdf] User Manual 80100432, 80100431, 80100430, MIG-A-Twist Smart Torch Module, MIG-A-Twist, Smart Torch Module, Torch Module, Module

References

• User Manual