MEAN WELL SP-150 Series 150W Single Output with PFC Function logo

MEAN WELL SP-150 Series 150W Single Output with PFC Function

MEAN WELL SP-150 Series 150W Single Output with PFC Function product

Features

  • Universal AC input / Full range
  • Built-in active PFC function, PF>0.93
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Built-in constant current limiting circuit
  • Remote ON-OFF control(Optional)
  • LED indicator for power on
  • 100% full load burn-in test
  • Fixed switching frequency at PFC:67KHz PWM:134KHz
  • 3 years warranty

SPECIFICATION

MODEL

SP-150-3.3 SP-150-5 SP-150-7.5 SP-150-12 SP-150-13.5 SP-150-15 SP-150-24 SP-150-27

SP-150-48

OUTPUT DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
RATED CURRENT 30A 30A 20A 12.5A 11.2A 10A 6.3A 5.6A 3.2A
CURRENT RANGE 0 ~ 30A 0 ~ 30A 0 ~ 20A 0 ~ 12.5A 0 ~ 11.2A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 3.2A
RATED POWER 99W 150W 150W 150W 151.2W 150W 150W 151.2W 153.6W
RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME 700ms, 40ms at full load
HOLD UP TIME (Typ.) 20ms at full load
INPUT VOLTAGE                                    RANGE                                      85 ~ 264VAC         120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.93/230VAC         PF>0.97/115VAC at full load
EFFICIENCY (Typ.) 73% 77.5% 81% 84% 84% 85% 85% 85% 85%
AC CURRENT (Typ.) 2.5A/115VAC        1.2A/230VAC
INRUSH CURRENT (Typ.) COLD START 45A/230VAC
LEAKAGE CURRENT <2mA / 240VAC
PROTECTION  OVERLOAD 105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF
ENVIRONMENT WORKING TEMP. -10 ~ +55℃ (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.05%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

 

SAFETY STANDARDS UL60950-1 approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC     I/P-FG:2KVAC     O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level,   criteria A

OTHERS

MTBF 191.2K hrs. min.      MIL-HDBK-217F (25℃)
DIMENSION 199*99*50mm (L*W*H)
PACKING 0.76Kg; 20pcs/16.4Kg/1.21CUFT
NOTE
  • All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  • Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  • Tolerance : includes set up tolerance, line regulation and load regulation.
  • The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
  • Derating may be needed under low input voltages. Please check the derating curve for more details.
  • Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
Mechanical Specification

MEAN WELL SP-150 Series 150W Single Output with PFC Function 01
MEAN WELL SP-150 Series 150W Single Output with PFC Function 02
MEAN WELL SP-150 Series 150W Single Output with PFC Function 03Terminal Pin No. Assignment

Pin No.

Assignment Pin No.

Assignment

1

AC/L 4,5 DC OUTPUT -V
2 AC/N 6,7

DC OUTPUT +V

3

FG

Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional)

Pin No. Assignment Mating Housing Terminal

1

RC+ JST XHP or equivalent

JST SXH-001T-P0.6 or equivalent

2

RC-

Block Diagram

MEAN WELL SP-150 Series 150W Single Output with PFC Function 04

Derating Curve

MEAN WELL SP-150 Series 150W Single Output with PFC Function 05

Output Derating VS Input Voltage

MEAN WELL SP-150 Series 150W Single Output with PFC Function 06

Documents / Resources

MEAN WELL SP-150 Series 150W Single Output with PFC Function [pdf] Instruction Manual
SP-150 Series 150W Single Output with PFC Function, SP-150 Series, 150W Single Output with PFC Function

References

Leave a comment

Your email address will not be published. Required fields are marked *