MCHOSE K99 Handy Guide
K99 Function Card
Tip: When switched to Mac System from Windows, the functions of the WIN key and Left ALT key are Interchanged. Additionally, F1-F12 keys will function as multimedia keys.
SYSTEM MODE SWITCH
SIDE LIGHT SETTING
BACKLIGHT SETTING
STATUS LIGHT SETTING
* Switch replacement tutorial, please visit: https://youtu.be/1cp30_THpHM
WIRELESS CONNECTION
- Switch the toggle to [B] to enter the wireless mode.
Note: The connection method of wireless 2 and wireless 3 is the same as wireless 1. For wireless 2, press the key combination [FN-201 and the [indicator light] will be purple for wireless 3, press the key combination [FN-3], and the [indicator light] will be cyan. - Press the combination key [Fn+1] to switch to wireless 1 and hold for about 3 seconds until the blue Bght flashes quickly to activate wireless pairing.
- Search for the wireless device name [MCHOSE K99 3.0] of [MCHOSE K995.0) on your device, and click to connect, the wireless indicator light will returns normal
2.4GHZ CONNECTION
- Switch the toggle to (2.4G) to enter the 2.4GHz mode. Indicator light] flash green.
- Open the nameplate cover from the top right comer of the keyboard and take out the USB dongle dongle compartment. USB dongle from the dongle compartment .
- Insert the USB dongle into the USB port on your computer. The keyboard is now ready for use.
WIRED CONNECTION
- Switch the toggle to [OFF] to enter the wired mode.
- Plug the type-c port into the computer & keyboard USB port
Documents / Resources
 |
MCHOSE K99 Function Card [pdf] User Guide K99 Function Card, K99, Function Card, Card |