MCHOSE K99 Function Card User Guide

MCHOSE K99 Handy Guide

K99 Function Card

Tip: When switched to Mac System from Windows, the functions of the WIN key and Left ALT key are Interchanged. Additionally, F1-F12 keys will function as multimedia keys.

SYSTEM MODE SWITCH

SIDE LIGHT SETTING

BACKLIGHT SETTING

STATUS LIGHT SETTING

* Switch replacement tutorial, please visit: https://youtu.be/1cp30_THpHM

https://www.mchose.store/

WIRELESS CONNECTION

1. Switch the toggle to [B] to enter the wireless mode. Note: The connection method of wireless 2 and wireless 3 is the same as wireless 1. For wireless 2, press the key combination [FN-201 and the [indicator light] will be purple for wireless 3, press the key combination [FN-3], and the [indicator light] will be cyan.
2. Press the combination key [Fn+1] to switch to wireless 1 and hold for about 3 seconds until the blue Bght flashes quickly to activate wireless pairing.
3. Search for the wireless device name [MCHOSE K99 3.0] of [MCHOSE K995.0) on your device, and click to connect, the wireless indicator light will returns normal

2.4GHZ CONNECTION

1. Switch the toggle to (2.4G) to enter the 2.4GHz mode. Indicator light] flash green.
2. Open the nameplate cover from the top right comer of the keyboard and take out the USB dongle dongle compartment. USB dongle from the dongle compartment .
3. Insert the USB dongle into the USB port on your computer. The keyboard is now ready for use.

WIRED CONNECTION

1. Switch the toggle to [OFF] to enter the wired mode.
2. Plug the type-c port into the computer & keyboard USB port