CHLSC16 Rgbw LED Controller User Manual
CHLSC16 Rgbw LED Controller
M series LED controller is compatible with 8 kinds remotes of different function (patent technology) .
which means using one receiver could experience single color/CT dimming, RGB/RGBW adjustment to meet customers’ different lighting requirements. With the RF remote, speed/brightness adjustment. customise color and lighting changing modes selection could all be achieved
Parameter:
Remote (RGBW) :
| Model: | M4/M8 |
| Working Voltage: | 3Vdc (battery CR2032) |
| Working Frequency: | 433.92MHz |
| Remote Distance: | 30m |
| Working Temp.: | -30 ~55℃ ℃ |
| Weight(N.W.): | 42g |
CV Receiver (RGBW):
| Model: | M4-5A |
| Input Voltage: | 12~24Vdc |
| Current Load: | 5A×4CH Max 20A |
| Max Output Power: | (0…60W~120W) × 4CH |
| Protection: | Short circuit / Over-load |
| Working Temp.: | -30 ~55℃ ℃ |
| Weight(N.W.): | 125g |
System Diagram:
Product Size:
The Learning ID Method of Remote Control:
Remote control has been matched to the receiver before leave factory, if deleted accidentally , you can learn ID as follow .
Learning ID:
Short press ID learning button on the M4-5A receiver, the running light is on, then press any key on the M4/M8 remote control, the running light flashes several times, activated.
Cancel ID: Long press ID learning button on the M4-5A receiver for 5 seconds .
Attn: one receiver can be matched with max 10 same or different kinds remote.
Operating Instruction for Receiver：
Operating Instruction for Remote Control :
M4 Changing Mode Table
| No. | Mode | Instrutcion |
| 1 | Static Red | Brightness Adjustable |
| 2 | Static Green | Brightness Adjustable |
| 3 | Static Blue | Brightness Adjustable |
| 4 | Static Yellow | Brightness Adjustable |
| 5 | Static Purple | Brightness Adjustable |
| 6 | Static Cyan | Brightness Adjustable |
| 7 | Static White | Brightness Adjustable |
| 8 | RGB Skipping | Speed/Brightness Adjustable |
| 9 | 7 Colors Skipping | Speed/Brightness Adjustable |
| 10 | RGB Color Smooth | Speed/Brightness Adjustable |
| 11 | Full-color Smooth | Speed/Brightness Adjustable |
| 12 | Static Black | White light can be turn/off and adjusted |
Wiring Diagram:
E.g. 2: Connected 24V lamp, loads 0~480W ( 5A×4CH×24V ).
Documents / Resources
 |
LTECH CHLSC16 Rgbw LED Controller [pdf] User Manual CHLSC16 Rgbw LED Controller, CHLSC16, Rgbw LED Controller, LED Controller, Controller |
