GO Keyboard
User Guide
CONNECT WITH DONGLE
Install included batteries
2 batteries are included in the package
Install the 2.4 dongles and turn the keyboard on
GO Keys will auto connect
CONNECT WITH BLUETOOTH
Quick Press CONNECT
Switch to preferred connection:
Purple = 2.4
Blue = 
1
Yellow = 2
Press and hold CONNECT
LED will blink in pairing mode
Select “JLab GO Keys” in device settings
KEYS
Fn + 1/2/3:
Quick connection switch
Fn + Q/W/E:
Switch to Mac/Android/Windows keyboard layout
MEDIA DIAL
Vol -/+ : Rotate
Play/Pause: Single press
Track Forward: Double press
TrackBack: Press and hold
Fn + Right Shift: Lock / Unlock Fn key (See Shortcut Keys)
SPECIAL CHARACTERS
Symbols to the left (grey) show Mac mode functions.
Symbols to the right (white) show PC functions.
Access Mac characters (grey circle) with the Opt key.
Access PC symbols (white circle) with the right Alt key.
SHORTCUT KEYS
| Fn + | MAC | PC | Android |
| Esc | N/A | Homepage | Homepage |
| F1 | Brightness + | Brightness Brightness | Brightness + |
| F2 | Brightness – | Task | Brightness – |
| F3 | Task Control | Control | N/A |
| F4 | Show Applications | Notification Center | N/A |
| F5 | Search | Search | Search |
| F6 | Desktop | Desktop | N/A |
| F7 | TrackBack | TrackBack | TrackBack |
| F8 | Play/Pause | Play/Pause | Play Pause |
| F9 | Track Forward | Track Forward | Track Forward |
| F10 | Mute | Mute | Mute |
| F11 | Screenshot | Screenshot | Screenshot |
| F12 | Dashboard | Calculator | N/A |
| Delete | Screen lock | Screen lock | Screen lock |
QUICK TIPS
- When connecting through Bluetooth on Mac/PC/Android, the GO Keyboard should be in Bluetooth 1 or Bluetooth 2 setting.
Press the hold CONNECT button until the light starts blinking. Enter your Bluetooth device settings to connect. - If your device is not connecting, Forget the “JLab GO Keys” in your devise settings. Turn off and on the GO Keyboard.
Press hold the CONNECT button until the blinking light enters pairing mode. Reenter your device settings to repair. - If the 2.4G USB dongle is not registering connection:
- Remove the dongle
- Press Fn + 1 to enter 2.4G connection
- Press and hold CONNECT button until purple light blinks
- Plug the dongle back in
- Keys are non-removable. Do not try to remove it in any circumstance.
- To clean the keyboard, do not use spray cleaner directly on the keyboard. Lightly spray a cloth or microfiber fabric and then wipe the keyboard.
- To completely disconnect all wireless devices and return to factory settings, press hold “T”+”H”+”J” for 3+ seconds.
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
 |
YOUR WARRANTY All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage. |
 |
CONTACT US Reach out to us at support@jlab.com or visit intl.jlab.com/contact |
REGISTER TODAY
intl.jlab.com/register
Product updates | How-to tips FAQs & more
Documents / Resources
 |
JLAB GO Keyboard [pdf] User Guide GO Keyboard, GO, Keyboard |
