MIO-5391
7th Gen Intel Core Mobile Processors, Xeon, i7, i5, i3 3.5″ SBC w/ MIOe
Features
- 7th Gen Intel Core i7/i5/i3 + PCH QM175 & Xeon + PCH CM238
- Dual channel DDR4 2400, Max 32GB
- 1 Intel i210 GbE & 1 Intel i219 GbE support iAMT, rich I/O: 2COM, SATA, USB3.0, SMBus/I2C,16 bit GPIO full-size Mini PCIe or mSATA /M.2 E Key support NVME, 12V Power input
- Full-size Mini PCIe or mSATA /M.2 E Key
- Support NVME (optional)
- Supports iManager, WISE-PaaS/RMM, emb. SW API
Software APIs:
Specifications
| Platform | Processor | i7-7820EQ | i5-7442EQ | i3-7102E | E3-1505MV6 |
| Max. requency | 3.7 GHz | 2.9 GHz | – | 4.0 GHz | |
| Base requency | 3.0 GHz | 2.1 GHz | 2.1 GHz | 3.0 GHz | |
| Core/Tread | 4 | 4 | 2 | 4 | |
| LLC | 8MB | 6MB | 3MB | 8MB | |
| CPU TDP | 45W | 25W | 25W | 45W | |
| Chipset | QM175 | QM175 | QM175 | CM238 | |
| BIOS | AMI UEFI 28Mbit | ||||
| Memory | Technology | DDR4 up to 2400MHz | |||
| Max. Capacity | Up to 32GB | ||||
| Channel/Socket | Dual Channel 260P SO-DIMM (1 DIMM per Channel) | ||||
| ECC Support | ECC is supported with Xeon SKU | ||||
| Graphics | Controller | Intel Gen 9 low power graphics | |||
| Max. requency | 1GHz | ||||
| Base Frequency | 350MHz | ||||
| Graphics Memory | Intel DMVT5.0, share memory up to 1024MB | ||||
| 3D/HW Acceleration | HW Codec: H.265/HEVC 8bit/10bit encode/decode; VP8 8bit encode/decode, VP9 10bit decode; MPEG2; JPEG; VC1/WMV9. | ||||
| Display I/F | LVDS | 48-bit LVDS up to WUXGA 1920 x 1200 at 60Hz Supports 3.3/5/12V for VDD power, 5/12V for inverter | |||
| HDMI | Supports 2 ports HDMI 1.4 for HD Video playback Max resolution up to 4096 x 2304 @ 30Hz | ||||
| Mulit-Display | HDMI + LVDS, Dual HDMI + LVDS with each display combinations | ||||
| Ethernet | Controller | LAN1: Intel 219LM, LAN2: Intel 210IT | |||
| Speed | 10/100/1000 Mbps | ||||
| External I/O | Ethernet | 2 x RJ-45 | |||
| VGA/HDMI/DP | -/2/- | ||||
| USB3.0/USB2.0 | 4/- | ||||
| COM Port | 1 x RS-232/422/485 | ||||
| LED | Power status, HDD R/W | ||||
| Power DC-Jack | Optional | ||||
| Internal I/O | SATA | 2 x SATA GenIII 6.0Gbps | |||
| USB2.0 | 2 | ||||
| Serial Bus | SMBus default, I2C optional | ||||
| COM Port | 1 x RS-232/422/485 | ||||
| GPIO | 16-bit general purpose input output I/O (Option to 2x COM ports, RS-232 only) | ||||
| Audio | Realtek ALC888S, High Definition Audio (HD), Line-in, Line-Out, Mic-in | ||||
| Invertor | 3.3/5/12V for VDD power, 5/12V for inverter | ||||
| LPC/SPI Bus | – | ||||
| CAN Bus | – | ||||
| Fan | 1 x Smart Fan | ||||
| Front Panel Control | Power-on, Reset, Buzzer, … | ||||
| Board Feature | Watchdog Timer | 65536 level, 0~65535 sec | |||
| TPM | TPM2.0 (Infineon SLB9665) | ||||
| iManager 3.0 | Yes | ||||
| Storage | SATA | 2, up to 6Gb/s (600 MB/s) | |||
| mSATA | 1 x Full-size | ||||
| NVME* | 1, dimension: 2230; PCIex2 | ||||
| Expansion | M.2 | E-Key (PCIe x1, USB2.0) | |||
| mPCIe/mSATA | 1 x full size mSATA with Sim holder | ||||
| MI/O Extension | DDI x 1, 4 PCIex1, USB2.0, LPC, SMBUS, rest, Line out, Power on | ||||
| Power | Supply Voltage | Vin: DC 12V +/- 10%; RTC Battery: Lithium 3V/210mAH | |||
| Connector | ATX 2×2 pin 90D, optional DC-Jack or ATX 2×2 pin 180D | ||||
| Power Management | AT, ATX | ||||
| Max. Consumption | 67.6W | 50.729W | 29.623 W | TBD | |
| Idle Consumption | 8.2W | 6.595W | 5.333 W | TBD | |
| Environment | Temperature | Operating: Standard: 0 ~ 60° C (32 ~ 140° F), Extend: -40 ~ 85° C (-40 ~ 185° F) Storage: -40 ~ 85° C (-40 ~ 185° F) | |||
| Humidity | Operating: 40° C @ 95% relative humidity, non-condensing Storage: 60° C @ 95%relative humidity, non-condensing | ||||
| Vibration Resistance | 3.5 Grms | ||||
| Certification | EMC | CE, FCC | |||
| Safety | – | ||||
| Mechanical | Dimensions | 146 x 102 mm (5.7” x 4”) | |||
MI/O Extension SBCs, Modules and Chassis
All product specifications are subject to change without notice.
Block Diagram
Ordering Information
| Part No. | CPU | Max. Frequency | Core | TDP | DDR4 Memory | PCH | Thermal Solution | Operating Temperature |
| MIO-5391E4M-H0A1 | E3-1505MV6 | 4.0GHz | 4 | 45W | ECC support | CM238 | Active | 0 ~ 60 °C |
| MIO-5391C7-H0A1 | i7-7820EQ | 3.7GHz | 4 | 45W | non-ECC | QM175 | Active | 0 ~ 60 °C |
| MIO-5391C5-U1A1 | i5-7442EQ | 2.9GHz | 4 | 25W | non-ECC | QM175 | Passive | 0 ~ 60 °C |
| MIO-5391C3-U1A1 | i3-7102E | 2.1GHz | 2 | 25W | non-ECC | QM175 | Passive | 0 ~ 60 °C |
| MIO-5391E4MZ2-H0A1 | E3-1505MV6 | 4.0GHz | 4 | 45W | ECC support | CM238 | Active | -40 ~ 85 °C |
| MIO-5391C7Z2-H0A1 | i7-7820EQ | 3.7GHz | 4 | 45W | non-ECC | QM175 | Active | -40 ~ 85 °C |
| MIO-5391C5Z2-U1A1 | i5-7442EQ | 2.9GHz | 4 | 25W | non-ECC | QM175 | Passive | -40 ~ 85 °C |
Packing List
| Part No. | Description | Quantity |
| MIO-5391 SBC | 1 | |
| 2006539100 | Startup Manual | 1 |
| 1700006291 | M Cable SATA 7P/SATA 7P 30cm C=R 180/90 | 1 |
| 1700018785 | SATA 35cm power cable | 1 |
| 1700019414 | A Cable D-SUB 9P(M)/2*5P-2.0 30cm for FWA-5442 | 1 |
| 1700019584 | Audio Cable 2*5P-2.0/JACK*3 20cm | 1 |
| mini Jumper pack | 1 | |
| 1960089060T001 | Cooler (for TDP 45W SKU) | 1 |
| 1960089142T001 | Heatsink (for TDP 25W SKU) | 1 |
Optional Accessories
| Part No. | Description |
| 1960090936N001 | Heat spreader (16.7mm height) |
| 1700002172 | Internal 2 ports USB cable 17CM |
Embedded OS/API
Embedded OS/API | Part No. | Description |
| WIN10 for I7 & Xeon SKUs | 20706WX9HS0017 | img W10 19HL MIO-5391 64b 1809 ENU |
| WIN10 for I5 & I3 SKUs | 20706WX9VS0020 | img W10 19VL MIO-5391 64b 1809 ENU |
| Software API | SUSI 4.0/iManager 3.0 | |
| Software API | WisePaaS/DeviceOn |
Rear I/O View
Online Download www.advantech.com/products
Documents / Resources
 | Intel Intel Core Mobile Processors [pdf] User Guide Intel Core Mobile Processors, MIO-5391 |
