BH CORE MTB User Guide

BH CORE MTB User Guide
BH CORE MTB

DISPLAY INFO
Display info

Power button ON /OFF
Hold power button

Notice icon CHANGE INFO
Change info

Level icon LEVEL
Level diagram

Light icon LIGHTS
light on/off diagram

Throttle icon THROTTLE
Break

SETTINGS

Setting
SETTINGS
SETTINGS

  • Reset Trip
    Reset Trip
  • Brightness
    Brightness
  • Battery Status 
    Battery Status
  • Display Info
    Display Info
  • Units
    Units
  • Motor Settings
    Motor Settings
  • Wheel Size
    Wheel Size
  • Language
    Language
  • Connectivity
    Connectivity
  • Connectivity – Bluetooth
    Connectivity - Bluetooth
  • Connectivity – Ant+
    Connectivity - Ant+
  • Vibration notifications
    Vibration notifications
  • Errors
    Errors Errors

BATTERY XPRO 

CORE DISPLAY INFO

CORE DISPLAY INFO

BATTERY XPRO INFO

BATTERY XPRO INFO

BATTERY

Battery external port
Battery external port

Only use the charger provided with the battery. Do not place any object on the charger.

Charging the BH battery at 70-80% is mandatory if not used or stored for a long time period.

Additionally, control the level of the battery charger evevery 3 months and keep it always above 20% charge.

If the battery is in deep sleep mode and in order to wake it up, please charge the battery to 100% capacity.

DOWNLOAD COMPLETE MANUAL

Pdf file

https://www.bhbikes.com/en_INT/about-bh/manuals-downloads

 

Documents / Resources

PDF thumbnailCORE MTB
User Guide · CORE, MTB, BH

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Es normal que la batería se desconecte tras caída leve y no vuelva a conectar hasta que se se ponga en carga

    Anonymous asks Es normal que la batería se desconecte tras caída leve y no vuelva a conectar hasta que se se ponga en carga
    Manuals+ clarified question
    Question

    Is it normal for the battery to disconnect after a minor fall and only reconnect once it is plugged into a charger?

    Answer

    While the manual does not explicitly mention impact-related disconnections, it does describe a "deep sleep" or "protected mode" (modo dormido) that the battery can enter. According to the BH CORE MTB Quick Guide, if the battery enters this state, it is necessary to perform a full charge to 100% capacity to reactivate it.

    If your battery disconnects after a light fall, it may be triggering a safety protection circuit. To resolve this and wake the system back up, you must connect it to the original charger. However, if this happens frequently or after very minor vibrations, it could indicate a loose internal connection or a faulty battery mount. You should check that the battery is properly seated and, if the problem persists, contact an authorized BH dealer to inspect the internal connectors for damage caused by the fall.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.