IFI LOGO

IFIDFNDR iDefender+ 3.0 Ground Loop Eliminator

IFI DFNDR iDefender 3.0 Ground Loop Eliminator

over view

IFI DFNDR iDefender 3.0 Ground Loop Eliminator 1

  1.  USB3.0 Type A/Type C
    Insert into computer/laptop port.
  2.  LED colors
    •  ORANGE Connection made between peripheral and device.
    •  ORANGE External 5V power supply active.
  3.  USB3.0 Type A/Type C
    This is for connecting to the peripheral
  4.  USB-C power supply port
    For DACs that are USB-powered, they require a 5V power supply via the USB-C port to function. The iPower (5V) is recommended but any low noise 5V power adapter supply will work. For DACs that are NOT USB-powered, the 5V micro USB power supply is NOT required. If in doubt, consult your device manufacturer or open an enquiry with the iFi Support Ticket System via the website.

Specifications

  •  IsoGround® with intelligent auto ground loop detection and disconnection
  •  USB Noise Termination® cuts the noisy USB power at the input (requires USB power supply if DAC is not internally-powered. We recommend the iPower2 5V).
  •  USB3.0 and USB-C technology
  •  Rating: 5V/1A max.
  •  Dimensions: 50 x 20 x 9 mm 2.0″ x 0.8″ x 0.4″
  •  Net weight: 6.6 g (0.23 oz)
  • • Warranty period: 12 months

Specifications are subject to change without notice.
Tips: Not recommended for USB Power Delivery.
Warning: exceeding the voltage and current limits may damage the device and/or connected equipment

Documents / Resources

ifi IFIDFNDR iDefender+ 3.0 Ground Loop Eliminator [pdf] User Manual
IFIDFNDR, iDefender 3.0 Ground Loop Eliminator

References

Leave a comment

Your email address will not be published. Required fields are marked *