GRAPHTEC CE8000 Series Cutting Plotter
Specifications:
- Name: Cutting Plotter CE8000series
- Cutter type: Roll feed
- Drive system: Digital servo
- Max. cutting area [W x L]:
- CE8000-40: 375mm x 50m
- CE8000-60: 603mm x 50m
- CE8000-130: 1270mm x 50m
- Accuracy guaranteed cutting area (W x L) when using basket:
- CE8000-40: 355mm x 2m
- CE8000-60: 583mm x 2m (583mm x 5m)
- CE8000-130: 1250mm x 2m (1250mm x 5m)
- Mountable media size:
- Minimum: 50mm
- Maximum: 85mm
Product Usage Instructions
- Installation and Setup:
Follow the manufacturer’s instructions to set up the cutting plotter in your workspace. Ensure the device is placed on a stable surface with enough space for media handling. - Loading Media:
Insert the media into the cutting plotter according to the specified width range. Make sure it is properly aligned and secured with the push rollers. - Using Cutting Software:
Install the provided software such as Cutting Master 5 or Graphtec Studio 2 on your Windows or Mac computer. Use these programs to create, edit, and send cutting data to the plotter. - Setting Cutting Parameters:
Adjust cutting conditions like speed, force, and other settings based on the type of material you are working with. Ensure the settings are optimized for accurate cuts. - Initiating Cutting Process:
Select the desired design or cutting data on the software, then send the command to start the cutting process. The cutting plotter will automatically detect registration marks and begin cutting.
FAQ:
- Q: Can I use any type of media with this cutting plotter?
A: The cutting plotter supports various media types including vinyl, paper, and more. Ensure the media falls within the specified size and weight limits for optimal performance. - Q: How do I troubleshoot if the cutting plotter encounters errors during operation?
A: Refer to the user manual for error code explanations and troubleshooting steps. Ensure the media is loaded correctly and check the cutting parameters for any inconsistencies.
Cutting Plotter
CE8000series
CE8000-40/CE8000-60/CE8000-130
NEW FUNCTIONS!
- Wireless LAN: Able to install anywhere in your office without being limited by the cable length.
For limited areas only.
- Media Set Assist: Suction fans are installed to avoid media lift and shift when feeding.
- Touch panel: The operability has been improved. Frequently used functions are displayed as icons.
- Email notification function: The completion and error of continuous cut will be notified to users by email.
FEATURES TO IMPROVE YOUR PRODUCTIVITY
- Top-level cutting speed, accuracy, quality will be your best business partner.
- Operate both half-cut and perforation cut with one tool.
- Economy efficient by making full use of the media margin that tends to be wasted.
- By inserting a USB flash memory, cutting data can be transfered without using a PC.
- Just operate START and the cutting plotter detects the right data with the barcord autoatically.
- Can be combined with any printers when creating stickers and lables (Print&Cut).
- Multiple-mark compensation (Matrix copy) function supports 0mm margin.
- Cutting data can be placed outside the registration marks and able to make full use of the media.
- Automatic identification of cutting data with the dedicated barcode avoids cutting wrong data.
Software included as standard
Cutting Master 5 (Windows / Mac)
RIP software to send cutting data from Adobe Illustrator / CorelDRAW to the cutting plotter.
- Registration marks setting Objects layout
- Cutting conditions setting etc.
Graphtec Studio 2 (Windows / Mac)
Create, design, edit objects&texts and send data to the cutting plotter.
- Registration marks setting Basic design of bjects&texts
- Objects Layout Cutting conditions setting etc.
| Specifications | ||||
| Name | CE8000-40 | CE8000-60 | CE8000-130 | |
| Cutter type | Roll feed | |||
| Drive system | Digital servo | |||
| Max. cutting area [W x L] | 375mm x 50m | 603mm x 50m | 1270mm x 50m | |
| Accuracy guaranteed cutting area (W x L) when using basket | 355mm x 2m | 583mm x 2m (583mm x 5m) | 1250mm x 2m (1250mm x 5m) | |
| Mountable media size | Minimum | 50mm | 85mm | |
| Maximum | 484mm (19inch) | 712mm (28inch) | 1372mm (54inch) | |
| Mountable roll media weight | 5kg | 9kg | 17kg | |
| Number of push rollers | 2 | 3 | ||
| Max. cutting speed (45°) | 900mm/s | 1000mm/s | ||
| Max. acceleration | 21.2m/s2 (45º) | 14.1m/s2 | ||
| Cutting force | 4.41N (450gf) | |||
| Min. font size | Alphanumeric: approx. 5mm (varies depending on font and media) | |||
| Mechanical step size | 0.005mm | |||
| Programmable step size | GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM : 0.025mm | |||
| Repeatability | Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction) | |||
| Installable number of tools | 1 | |||
| Blade types | Supersteel | |||
| Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen | |||
| Media types | Max. 0.25mm thickness Marking film (PVC / fluorescent/reflective) *High-intensity reflective sheet is not supported | |||
| Interface | wireless LAN, USB2.0, Ethernet 10BASE-T/100BASE-TX (optional) | |||
| Buffer memory | 2MB | |||
| Command sets | GP-GL / HP-GL™ * (Set by command or auto-detect) | |||
| Display | Touch panel (240dot x 128dot) | |||
| Power source | AC100-120V, AC200-240V, 50/60Hz (auto-switchover) | |||
| Power consumption | Max. 140W | |||
| Operating environment | 10 – 35℃ , 35 – 75％ R.H. (non-condensing) | |||
| Accuracy guaranteed environment | 16 – 32℃ , 35 – 70％ R.H. (non-condensing) | |||
| External dimensions [W x D x H] including stand | 677 x 289 x 266mm | 903 x 582 x 1076mm | 1644 x 811 x 1076mm | |
| Weight (approx.) including stand | 11kg | 21kg | 40kg | |
| Safety standards | PSE, UL/cUL, CE marking | |||
| EMC standards | VCCI Class A, FCC Class A, CE marking | |||
| Standard included software | Cutting Master 5, Graphtec Studio 2, Windows Driver | |||
HP-GLTM is a registered trademark of Hewlett-Packard Company.
| Options | ||
| Item | Name | Description |
| Media baskets | PG0111 | for CE8000-60 |
| PG0112 | for CE8000-130 | |
| Roll media stocker | OPH-A57 | for CE8000-60 |
| Carrier sheet table | OPH-A45 | for CE8000-40/60 |
Standard accesories
- AC power cable
- Cutter plunger (PHP33-09N-HS)
- Stand (CE8000-60/130 only)
- Safety guide
- Cutting blade (CB09UB-1P)
- Roll media stocker (CE8000-40 only) Setup manual
- WLAN module set
| Item | Name | Description |
| Cutter plunger | PHP33-CB09N-HS | Cutter plunger for Φ0.9mm x1 |
| PHP33-CB15N-HS | Cutter plunger for Φ1.5mm x1 | |
| Blade | CE09UB-5 | Φ0.9mm, 45º, Supersteel (for PVC film) |
| CB09UB-K60-5 | Φ0.9mm, 60º, Supersteel (for PPF) | |
| CB15U-5 | Φ1.5mm, 45º, Supersteel (for paper, cardboard) | |
| CB15U-K30-5 | Φ1.5mm, 30º, Superstee (for paper, cardboard) | |
| Loupe | PM-CT-001 | Blade loupe (for PHP33/PHP35 series) |
| Fiber-tip pen holder | PHP31-FIBER | x1 |
| Ballpoint pen | KF700-BK | Black x10 |
| KF700-RD | Red x10 | |
| Ballpoint pen holder | PHP34-BALL | x1 |
| Ball point pen refill | KB700-BK | Black x10 |
| Carrier sheet | CR09300-A3 | for A3 size x2 *Please use with Cutting media table (OPH-A45). |
| Cutting mat | PM-CR-013 | for CE8000-40 x2 |
| PM-CR-014 | for CE8000-60 x2 | |
| PM-CR-015 | for CE8000-130 x2 | |
| USB cable | PM-ET-001 | Cable length: 2.9m x1 |
Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.
Items mentioned are subject to change without notice. For more information about product, please check the website or con tact your local repr .esentive.
Important safety instructions
Before using it, please read the user manual and then please use irot properly in accordance with the descrip. tion. To avoid malfunction or electric shock, please ensure ground connection and use it in specified power source.
503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan
Tel : +81 -45-825-6250
Fax : +81 -45-825-6396
Website https://www.graphteccorp.com
Documents / Resources
 |
GRAPHTEC CE8000 Series Cutting Plotter [pdf] Owner's Manual CE8000 Series Cutting Plotter, CE8000 Series, Cutting Plotter, Plotter |
 |
GRAPHTEC CE8000 Series Cutting Plotter [pdf] Instruction Manual CE8000-UM-8M1, CE8000-40, CE8000-60, CE8000-130, CE8000 Series Cutting Plotter, CE8000 Series, Cutting Plotter, Plotter |
