GRAPHTEC-logo

GRAPHTEC CE8000 Series Cutting Plotter

GRAPHTEC-CE8000-Series- Cutting-Plotter-product

Specifications:

  • Name: Cutting Plotter CE8000series
  • Cutter type: Roll feed
  • Drive system: Digital servo
  • Max. cutting area [W x L]:
    • CE8000-40: 375mm x 50m
    • CE8000-60: 603mm x 50m
    • CE8000-130: 1270mm x 50m
  • Accuracy guaranteed cutting area (W x L) when using basket:
    • CE8000-40: 355mm x 2m
    • CE8000-60: 583mm x 2m (583mm x 5m)
    • CE8000-130: 1250mm x 2m (1250mm x 5m)
  • Mountable media size:
    • Minimum: 50mm
    • Maximum: 85mm

Product Usage Instructions

  1. Installation and Setup:
    Follow the manufacturer’s instructions to set up the cutting plotter in your workspace. Ensure the device is placed on a stable surface with enough space for media handling.
  2. Loading Media:
    Insert the media into the cutting plotter according to the specified width range. Make sure it is properly aligned and secured with the push rollers.
  3. Using Cutting Software:
    Install the provided software such as Cutting Master 5 or Graphtec Studio 2 on your Windows or Mac computer. Use these programs to create, edit, and send cutting data to the plotter.
  4. Setting Cutting Parameters:
    Adjust cutting conditions like speed, force, and other settings based on the type of material you are working with. Ensure the settings are optimized for accurate cuts.
  5. Initiating Cutting Process:
    Select the desired design or cutting data on the software, then send the command to start the cutting process. The cutting plotter will automatically detect registration marks and begin cutting.

FAQ:

  • Q: Can I use any type of media with this cutting plotter?
    A: The cutting plotter supports various media types including vinyl, paper, and more. Ensure the media falls within the specified size and weight limits for optimal performance.
  • Q: How do I troubleshoot if the cutting plotter encounters errors during operation?
    A: Refer to the user manual for error code explanations and troubleshooting steps. Ensure the media is loaded correctly and check the cutting parameters for any inconsistencies.

Cutting Plotter

CE8000series
CE8000-40/CE8000-60/CE8000-130

GRAPHTEC-CE8000-Series- Cutting-Plotter- 17

GRAPHTEC-CE8000-Series- Cutting-Plotter- (1) GRAPHTEC-CE8000-Series- Cutting-Plotter- (3) GRAPHTEC-CE8000-Series- Cutting-Plotter- (4)

NEW FUNCTIONS!

GRAPHTEC-CE8000-Series- Cutting-Plotter- (5)

  • Wireless LAN: Able to install anywhere in your office without being limited by the cable length.
    For limited areas only. GRAPHTEC-CE8000-Series- Cutting-Plotter- (6)
  • Media Set Assist: Suction fans are installed to avoid media lift and shift when feeding. GRAPHTEC-CE8000-Series- Cutting-Plotter- (7)
  • Touch panel: The operability has been improved. Frequently used functions are displayed as icons. GRAPHTEC-CE8000-Series- Cutting-Plotter- (8)
  • Email notification function: The completion and error of continuous cut will be notified to users by email.

FEATURES TO IMPROVE YOUR PRODUCTIVITY

GRAPHTEC-CE8000-Series- Cutting-Plotter- (9)

  • Top-level cutting speed, accuracy, quality will be your best business partner. GRAPHTEC-CE8000-Series- Cutting-Plotter- (10)
  • Operate both half-cut and perforation cut with one tool. GRAPHTEC-CE8000-Series- Cutting-Plotter- (11)
  • Economy efficient by making full use of the media margin that tends to be wasted. GRAPHTEC-CE8000-Series- Cutting-Plotter- (12)
  • By inserting a USB flash memory, cutting data can be transfered without using a PC. GRAPHTEC-CE8000-Series- Cutting-Plotter- (13)
  • Just operate START and the cutting plotter detects the right data with the barcord autoatically. GRAPHTEC-CE8000-Series- Cutting-Plotter- (14)
  • Can be combined with any printers when creating stickers and lables (Print&Cut). GRAPHTEC-CE8000-Series- Cutting-Plotter- (15)
  • Multiple-mark compensation (Matrix copy) function supports 0mm margin. GRAPHTEC-CE8000-Series- Cutting-Plotter- (16)
  • Cutting data can be placed outside the registration marks and able to make full use of the media. GRAPHTEC-CE8000-Series- Cutting-Plotter-
  • Automatic identification of cutting data with the dedicated barcode avoids cutting wrong data.

Software included as standard

Cutting Master 5 (Windows / Mac)
RIP software to send cutting data from Adobe Illustrator / CorelDRAW to the cutting plotter.

  • Registration marks setting Objects layout
  • Cutting conditions setting etc.

Graphtec Studio 2 (Windows / Mac)
Create, design, edit objects&texts and send data to the cutting plotter.

  • Registration marks setting Basic design of bjects&texts
  • Objects Layout Cutting conditions setting etc.
Specifications
Name CE8000-40 CE8000-60 CE8000-130
Cutter type Roll feed
Drive system Digital servo
Max. cutting area [W x L] 375mm x 50m 603mm x 50m 1270mm x 50m
Accuracy guaranteed cutting area (W x L) when using basket 355mm x 2m 583mm x 2m (583mm x 5m) 1250mm x 2m (1250mm x 5m)
Mountable media size Minimum 50mm 85mm
Maximum 484mm (19inch) 712mm (28inch) 1372mm (54inch)
Mountable roll media weight 5kg 9kg 17kg
Number of push rollers 2 3
Max. cutting speed (45°) 900mm/s 1000mm/s
Max. acceleration 21.2m/s2 (45º) 14.1m/s2
Cutting force 4.41N (450gf)
Min. font size Alphanumeric: approx. 5mm (varies depending on font and media)
Mechanical step size 0.005mm
Programmable step size GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM : 0.025mm
Repeatability Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction)
Installable number of tools 1
Blade types Supersteel
Pen types Oil-based ballpoint pen, Water-based fiber-tip pen
Media types Max. 0.25mm thickness Marking film (PVC / fluorescent/reflective) *High-intensity reflective sheet is not supported
Interface wireless LAN, USB2.0, Ethernet 10BASE-T/100BASE-TX (optional)
Buffer memory 2MB
Command sets GP-GL / HP-GL™ * (Set by command or auto-detect)
Display Touch panel (240dot x 128dot)
Power source AC100-120V, AC200-240V, 50/60Hz (auto-switchover)
Power consumption Max. 140W
Operating environment 10 – 35℃ , 35 – 75% R.H. (non-condensing)
Accuracy guaranteed environment 16 – 32℃ , 35 – 70% R.H. (non-condensing)
External dimensions [W x D x H] including stand 677 x 289 x 266mm 903 x 582 x 1076mm 1644 x 811 x 1076mm
Weight (approx.) including stand 11kg 21kg 40kg
Safety standards PSE, UL/cUL, CE marking
EMC standards VCCI Class A, FCC Class A, CE marking
Standard included software Cutting Master 5, Graphtec Studio 2, Windows Driver

HP-GLTM is a registered trademark of Hewlett-Packard Company.

Options
Item Name Description
Media baskets PG0111 for CE8000-60
PG0112 for CE8000-130
Roll media stocker OPH-A57 for CE8000-60
Carrier sheet table OPH-A45 for CE8000-40/60

Standard accesories

  • AC power cable
  • Cutter plunger (PHP33-09N-HS)
  • Stand (CE8000-60/130 only)
  • Safety guide
  • Cutting blade (CB09UB-1P)
  • Roll media stocker (CE8000-40 only) Setup manual
  • WLAN module set
Item Name Description
Cutter plunger PHP33-CB09N-HS Cutter plunger for Φ0.9mm x1
PHP33-CB15N-HS Cutter plunger for Φ1.5mm x1
Blade CE09UB-5 Φ0.9mm, 45º, Supersteel (for PVC film)
CB09UB-K60-5 Φ0.9mm, 60º, Supersteel (for PPF)
CB15U-5 Φ1.5mm, 45º, Supersteel (for paper, cardboard)
CB15U-K30-5 Φ1.5mm, 30º, Superstee (for paper, cardboard)
Loupe PM-CT-001 Blade loupe (for PHP33/PHP35 series)
Fiber-tip pen holder PHP31-FIBER x1
Ballpoint pen KF700-BK Black x10
KF700-RD Red x10
Ballpoint pen holder PHP34-BALL x1
Ball point pen refill KB700-BK Black x10
Carrier sheet CR09300-A3 for A3 size x2 *Please use with Cutting media table (OPH-A45).
Cutting mat PM-CR-013 for CE8000-40 x2
PM-CR-014 for CE8000-60 x2
PM-CR-015 for CE8000-130 x2
USB cable PM-ET-001 Cable length: 2.9m x1

Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.
Items mentioned are subject to change without notice. For more information about product, please check the website or con tact your local repr .esentive.

Important safety instructions

Before using it, please read the user manual and then please use irot properly in accordance with the descrip. tion. To avoid malfunction or electric shock, please ensure ground connection and use it in specified power source.

503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan
Tel : +81 -45-825-6250
Fax : +81 -45-825-6396
Website https://www.graphteccorp.com

GRAPHTEC-CE8000-Series- Cutting-Plotter- (2)

Documents / Resources

GRAPHTEC CE8000 Series Cutting Plotter [pdf] Owner's Manual
CE8000 Series Cutting Plotter, CE8000 Series, Cutting Plotter, Plotter
GRAPHTEC CE8000 Series Cutting Plotter [pdf] Instruction Manual
CE8000-UM-8M1, CE8000-40, CE8000-60, CE8000-130, CE8000 Series Cutting Plotter, CE8000 Series, Cutting Plotter, Plotter

References

Leave a comment

Your email address will not be published. Required fields are marked *