GRAPHTECGRAPHTEC
Owner's Manual for GRAPHTEC models including: CE8000 Series Cutting Plotter, CE8000 Series, Cutting Plotter, Plotter
Aug 5, 2024 — Minimum. 50mm. 85mm. Maximum. 484mm (19inch). 712mm (28inch). 1372mm (54inch). Mountable roll media weight. 5kg. 9kg. 17kg. Number of push rollers.
5 août 2024 — Minimum. 50mm. 85mm. Maximum. 484mm (19inch). 712mm (28inch). 1372mm (54inch). Mountable roll media weight. 5kg. 9kg. 17kg. Number of push rollers.
File Info : application/pdf, 4 Pages, 2.60MB
DocumentDocumentCutting Plotter CE8000series CE8000-40/CE8000-60/CE8000-130 www.graphteccorp.com Window Signs Traffic Signs Heat Transfer Product Labels Stickers Custom-made Merchandises POPs NEW FUNCTIONS! Cards Backlight Films Barcode Quick Menu Tool Menu Conditions Wireless LAN: Able to install anywhere in your Touch panel: The operability has been improved. office without being limited by the cable length. Frequently used functions are displayed as icons. *For limited areas only. Media Set Assist: Suction fans are installed to Email notification function: The completion and error avoid media lift and shift when feeding. of continuous cut will be notified to users by email. FEATURES TO IMPROVE YOUR PRODUCTIVITY Quality guaranteed Max. 5m Printer A Printer B Printer C Top-level cutting speed, accuracy, quality will be your best business partner. Can be combined with any printers when creating stickers and lables (Print&Cut). Media Release paper Operate both half-cut and perforation cut with Multiple-mark compensation (Matrix copy) one tool. function supports 0mm margin. Mountable media width Min. 50mm Economy efficient by making full use of the media margin that tends to be wasted. Cutting data can be placed outside the registration marks and able to make full use of the media. By inserting a USB flash memory, cutting data can be transfered without using a PC. Automatic identification of cutting data with the dedicated barcode avoids cutting wrong data. Barcode Available for both directions! Just operate START and the cutting plotter detects the right data with the barcord autoatically. Feeding direction Software included as standard Cutting Master 5 (Windows / Mac) RIP software to send cutting data from Adobe Illustrator / CorelDRAW to the cutting plotter. Registration marks setting Objects layout Cutting conditions setting etc. Graphtec Studio 2 (Windows / Mac) Create, design, edit objects&texts and send data to the cutting plotter. Registration marks setting Basic design of bjects&texts Objects Layout Cutting conditions setting etc. Specifications Name Cutter type Drive system Max. cutting area [W x L] Accuracy guaranteed cutting area (W x L) when using basket Mountable media size Minimum Maximum Mountable roll media weight Number of push rollers Max. cutting speed (45°) Max. acceleration Cutting force Min. font size Mechanical step size Programmable step size Repeatability Installable number of tools Blade types Pen types Media types Interface Buffer memory Command sets Display Power source Power consumption Operating environment Accuracy guaranteed environment External dimensions [W x D x H] including stand Weight (approx.) including stand Safety standards EMC standards Standard included software CE8000-40 CE8000-60 CE8000-130 Roll feed Digital servo 375mm x 50m 603mm x 50m 1270mm x 50m 355mm x 2m 583mm x 2m (583mm x 5m) 1250mm x 2m (1250mm x 5m) 50mm 85mm 484mm (19inch) 712mm (28inch) 1372mm (54inch) 5kg 9kg 17kg 2 3 900mm/s 1000mm/s 21.2m/s2 (45º) 14.1m/s2 4.41N (450gf) Alphanumeric: approx. 5mm (varies depending on font and media) 0.005mm GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM : 0.025mm Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction) 1 Supersteel Oil-based ballpoint pen, Water-based fiber-tip pen Max. 0.25mm thickness Marking film (PVC / fluorescent / reflective) *High intensity reflective sheet is not supported wireless LAN, USB2.0, Ethernet 10BASE-T/100BASE-TX (optional) 2MB GP-GL / HP-GLTM * (Set by command or auto-detect) Touch panel (240dot x 128dot) AC100-120V, AC200-240V, 50/60Hz (auto-switchover) Max. 140W 10 - 35 , 35 - 75 R.H. (non-condensing) 16 - 32 , 35 - 70 R.H. (non-condensing) 677 x 289 x 266mm 903 x 582 x 1076mm 1644 x 811 x 1076mm 11kg 21kg PSE, UL/cUL, CE marking VCCI Class A, FCC Class A, CE marking Cutting Master 5, Graphtec Studio 2, Windows Driver 40kg *HP-GLTM is a registered trademark of Hewlett-Packard Company. Options Item Media baskets Roll media stocker Carrier sheet table Name PG0111 PG0112 OPH-A57 OPH-A45 Description for CE8000-60 for CE8000-130 for CE8000-60 for CE8000-40/60 Standard accesories AC power cable Cutter plunger (PHP33-09N-HS) Stand (CE8000-60/130 only) Safety guide Cutting blade (CB09UB-1P) Roll media stocker (CE8000-40 only) Setup manual WLAN module set Supply items Item Cutter plunger Blade Loupe Fiber-tip pen holder Ballpoint pen Ballpoint pen holder Ball point pen refill Carrier sheet Cutting mat USB cable Name PHP33-CB09N-HS PHP33-CB15N-HS CE09UB-5 CB09UB-K60-5 CB15U-5 CB15U-K30-5 PM-CT-001 PHP31-FIBER KF700-BK KF700-RD PHP34-BALL KB700-BK CR09300-A3 PM-CR-013 PM-CR-014 PM-CR-015 PM-ET-001 Description Cutter plunger for 0.9mm x1 Cutter plunger for 1.5mm x1 0.9mm, 45º, Supersteel (for PVC film) 0.9mm, 60º, Supersteel (for PPF) 1.5mm, 45º, Supersteel (for paper, cardboard) 1.5mm, 30º, Superstee (for paper, cardboard) Blade loupe (for PHP33/PHP35 series) x1 Black x10 Red x10 x1 Black x10 for A3 size x2 *Please use with Cutting media table (OPH-A45). for CE8000-40 x2 for CE8000-60 x2 for CE8000-130 x2 Cable length: 2.9m x1 Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners. Items mentioned are subject to change without notice. For more information about product, please check the website or contact your local repres.entive. Important safety instructions Before using it, please read the user manual and then please useroit properly in accordance with the desc.ription. To avoid malfunction or electric shock, please ensure ground connection and use it in specified power source. 503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan Tel : +81 -45-825-6250 Fax : +81 -45-825-6396 Website https://www.graphteccorp.com CE8000_JE10994_1D