3-Axis Handheld Gimbal for Smartphone
Quick start guide EN V 1.1

Vimble 3 is a three-axis handheld gimbal suitable for smartphone witan h extendable bar. It is small and foldable. The gimbal supports landscape and portrait shooting, which can also control phone shooting.
Suggestion
Feiyu Vimble 3 includes below information, please read the information before using the gimbal:

1. Quick start guide
2. Online instruction

Tutorial

• The tutorial videos can be watched at FeiyuTech official website or scan the QR code below.
  https://www.feiyu-tech.com/play/
• Watch tutorials in video skill page on Feiyu ON.

https://www.feiyu-tech.com/play/

Download the Feiyu ON App
Scan the QR code to download the app, or search for “Feiyu ON” in the App Store or Google Play.
* Requires iOS 9.0 or above, Android 6.0 or above.

https://itunes.apple.com/us/app/feiyu-on/id1170606381?mt=8	https://cdn1.feiyu-tech.com/dl/app/Feiyu_On.apk

Overview

[1] Roll axis [2] Cross arm [3] Tilt axis [4] Vertical arm [5] Pan axis [6] Upper trigger button (Custom functions in APP) [7] Lower trigger button [8] Handle (Built-in battery) [9] Type-C port for accessories [10] Limitation

[11] A button [12] B button [13] Zoom button [14] Smartphone holder [15] Extendable rod (Extendable range 0~198mm) [16] Joystick [17] Dial [18] Dial the function switching button [19] Status indicator

[20] Battery indicator [21] Album button [22] Mode button [23] Shutter button [24] USB-C port [25] Power button [26] 1/4 inch thread hole [27] Tripod

* This product dose NOT include smartphones.

Quick Experience

Step1：Unfold and fold

Step2：Smartphone Installation
Please power off the gimbal before installing the smartphone.
It is recommended to remove the smartphone case before installation.
Keep the logo of the smartphone holder upward. Keep the smartphone holder in the center.
If the smartphone is tilted, please move the smartphone left or right to make it horizontal.

Step3: Power ON/OFF
Long press the power button and release it when you hear the tone.

Charging

Please fully charge the battery before powering on the gimbal for the first time.
If the battery is too low, red light will flash fast, please charge the gimbal immediately.
Connect the USB 2.0 to the USB-C cable to charge. The indicator light is red while charging, and turns green after charging is complete.

Landscape & Portrait Mode Switching

Double click the mode button or manually rotate the smartphone holder to switch between landscape and portrait mode.
Do not make an anti-clockwise rotation in landscape mode, Do not make the clockwise rotation in portrait mode.

Extend and Reset the Handle

1. Hold the handle with one hand, hold the bottom of pan axis with another hand.
2. Extending: Pull the extendable rod out to a suitable length (Extendable range 0~198mm).

Reset: Push upper grip to make the extendable bar down to the handle part.
Do not rotate the rod to extend or reset it.

Tripod

The tripod is attached to the bottom of the gimbal in a rotating manner. According to the needs of shooting, choose whether to install it.

Connection

7.1 Bluetooth Connection
Turn on the gimbal.
Method 1: Download and install Feiyu ON App, run the App, and follow the prompts to turn on and connect with the Bluetooth.
Method 2: Turn on the smartphone Bluetooth, and connect the gimbal Bluetooth in the setting of the phone, e.g. FY_Vimble3_xx.
(If the Bluetooth can’t be found, please turn off Feiyu ON App in the background.)
7.2 App Connection
7.2.1 Download the Feiyu ON App

Photo / Video	Free panorama	Ultra -wide angle	180° panora
360° panorama	Overlapping image	Light rail mode	Quick panorama
Static timelapse	Track timelapse	Dolly Zoom	Light rail VIdeo
Video editing	Firmware Upgrade	……

Scan the QR code to download the app, or search for “Feiyu ON” in the App Store or Google Play.
* Requires iOS 9.0 or above, Android 6.0 or above.

https://itunes.apple.com/us/app/feiyu-on/id1170606381?mt=8	https://cdn1.feiyu-tech.com/dl/app/Feiyu_On.apk

7.2.2 Operation of App
Steps:

1. Enable Bluetooth on the smartphone ( Smartphone-Setting-Bluetooth). (Please refer to chapter 7.1)
2. Log in Feiyu ON App (Register for the first time).
3.  Install smartphone on gimbal, then turn on the gimbal.
4. Search gimbal on App, and tap “FY_Vimble3_xx” to connect, it will show”connection succeed” after a while.
5. You can control the gimbal via App, including remote control the gimbal to move, switch follow modes and set parameters, etc.
   If the connection timeout or fail, please check the Bluetooth connection. Or try to exit and log in the App again.
   a. Shooting Interface / Control Interface

1. Homepage 2. Album 3. Setting – Advanced settings 4. Gimbal information 5. Follow focus 6. Zoom 7a. Photo mode, tap to switch to video mode 7b. Video mode, tap to switch to photo mode

8a. Sub-mode of photo mode, tap to expand submenu 8b. Sub-mode of photo mode, tap to expand submenu 9. Shutter 10. Switch between front and rear camera 11. Camera setting 12. Submenu

4. Gimbal information 13. Remote Control 14. Upgrade 15. Tutorial 16. Settings 17. Set waypoints for timelapse

18. Reset 19. Virtual Joystick 20. Pan mode 21. Follow Mode 22. All follow Mode

b. Firmware Upgrade
Upgrade type introductions:

Keyboard firmware update	Fix/update or newly add button/touch screen/ interaction functions.
Bluetooth firmware update	Fix/update or newly add Bluetooth functions.
Gimbal firmware update	Fix/update or newly add gimbal control/ function/ parameter and etc.

How to update:

• Before starting an update, make sure that the battery level at least medium level.
• Connect Vimble 3 with Feiyu ON App, you will be prompted if a new firmware is available. Please follow the steps below to update it.
  (1) Tap upgrade ICON on App.
  (2) Select upgrade type.
  (3) Follow the prompts to upgrade the firmware.

· Do not exit Feiyu ON or run it in the background while updating the firmware.
Pay attention to on-screen prompts.
Noted: Gimbal has an update protection function. When the update fails, restart the gimbal, it will return to the previous firmware. Connect the app and update again to resolve the problem. In addition, parts of the new functions require updating two or more firmware to take effect. It is recommended to update regularly to keep the firmware of the gimbal as the latest version.

Common Operation

1. Basic: Vimble 3 can achieve those functions after a balanced gimbal.
2. Bluetooth: New available function achieved after connecting smartphone via Bluetooth with the functions in condition ① still available.
3.  APP: New available function which achieved via Feiyu ON APP with the functions in conditions ① , ② still available.

Diagram	Button	Condition	Function
	power button	Basic	Power off: · Long press: power on · Single tap: check battery level (while charging)  Power on: · Long press: power off · Double tap: standby mode (single tap at standby Power on: Single tap: enter/exit shortcut menu in APP Can choose video, photo, panorama, time-lapse modes，can set poweron default mode, M key shortcut mode ( power-on default mode and M key shortcut mode cannot be set as the same mode ), the factory setting of poweron default mode is follow mode, M key shortcut mode is pan mode, single tap function button to switch between these two modes.

Diagram	Button	Condition	Function
	Joystick	Basic	Control the movement of the tilt and  pan axes
		APP	· Select setting option · After enter album: move to left to choose previous photo/video; move to right to choose next photo/ video; move upward to play/pause; move downward to play/pause
	Dial function switching button	Basic	Switch the control object of dial: · Single tap: Switch to control focus when controlling zoom; In other cases, switch to control zoom · Long press: switch to control roll axis/zoom
	Dial	Basic	(After long press dial function switching button to switch the control object of dial to roll axis)
		APP	·Rotate: control roll axis to rotate  ·Rotate: control zoom(default)/focus/ Roll axis
	Album button	APP	Single tap: enter/exit album
	Mode button	Basic	· Single tap: switch among follow mode, pan follow, all follow mode cyclically (default to be follow mode) · Double tap: landscape and portrait mode
	Shutter button	Bluetooth APP	When the original camera APP is in photo/ video mode: ·Single tap: take a photo, start/stop recording · Press halfway: focus · Single tap: take the photo, start/stop recording · Long press: switch between photo/video
	Zoom button	Bluetooth	Slide up and down to adjust focus. ·Slide up (T direction): zoom in
			Slide down(W direction): zoom out
	A/B button	Basic	(After long press dial function switching button to switch the control object of dial to roll axis) · Long press: mark the current axes position as  A/B(while dial is controlling roll axis) · Single tap: return to the position A/B that you have marked
		APP	·Long press: mark the current zoom/ focus/axes position as A/B(while dial is controlling zoom/focus/roll axis) ·Single tap: return to the position A/B
	Upper trigger button	Basic	Long press: enter flash mode (release it to exit)
		APP	Can be customized as: switch front/ rear camera, etc
	Lower trigger button	Basic	· Long press: enter lock mode (release it to exit) · Double tap: recenter
		APP	Triple tap: Switch front/rear camera

Function Operation

Mode	Description
Pan Mode	The roll and tilt direction are fixed, and the smartphone moves according to the left-right movements of the user’s hand.
Lock Mode	The orientation of the camera is fixed.
Follow Mode  (Default mode)	The roll direction is fixed, and the smartphone moves according to the left-right movements, up-down movements of the user’s hand.
All Follow Mode	The camera moves according to the user’s hand.
Reset	Return to panning mode, three axises return to default position.
Manual Lock	Slide the tilt axis to one position for shooting.
Landscape and Portrait Shot	Assist landscape or portrait shooting

Operation mode

The figures below depict the operation modes when using Vimble 3 in portrait mode. The same operation modes apply when used in landscape mode.
Standard mode (Default):
Double tap trigger button to recenter smartphone.

Underslung mode: Hold gimbal upside down to enter underslung mode. (In which the smartphone can easily capture images from a lower position. User can also hold the tripod to help shooting)

Side grip mode: Rotate Vimble 3 to the right or left by 90° to make the smartphone be horizontal to the ground.

Low position mode: Extend the built-in extendable rod and adjust the angle as shown to enter low position mode. Use low position mode to shoot from a low angle.

Indicator

11.1 Status indicator

Status indicator	Status
Constant Blue light	Bluetooth connected
Blue light flash	Bluetooth disconnected
Blue light keeps flashing	Unpairing Bluetooth
Green light stays on	Charging completed
Green light flash	Initializing
Breathing light (green)	Standby mode
Red light stays on	Charging
Red light flash	Low power, will auto power off

11.2 Battery indicator

Battery indicator	Battery
	Fully charged
	Medium level of battery
	Low power
	(Flashing) Please charge the gimbal

Protection mechanism

State	Status
Battery is too low	Gimbal power off after alarm sound
The temperature is too high	Gimbal enter standby mode after alarm sound, and send message to App
Power on gimbal without load
Overload
Software conflict	Gimbal power off after alarm sound, and send message to App
Remove smartphone after powered on gimbal	Gimbal enter standby mode with green breathing light, and after leaving gimbal in standby mode for 10 minutes, it will auto power off
Power on gimbal when lie it down
Others	Gimbal power off after alarm sound, and send message to App

Gimbal Initialization

Initialization the gimbal when:

1. The camera is not in level.
2.  Not use for a long period of time.
3. The ambient temperature changes abruptly.

Method:
Method 1:
Initialize via App (Reset gimbal parameters).
Method 2:
Press album button and mode button together for 1 second;
Please refer to the form in chapter 11.1 in P16 to check the indicator status.
Note: if the initialization is unsuccessful for a long time, please restart the gimbal and retry.

Specifications

Product name: Feiyu Vimble 3 3-Axis Handheld Gimbal for Smartphone
Product model: VB3
Max. Tilt Range: -35° ~ +35°
Max. Roll Range: -50° ~ +50°
Max. Pan Range: -80° ~ +174°
Size: About 115×176×65mm (folded)
Net gimbal Weight: About 387g (not including tripod)
Battery: 1300mAh
Charging time: About 2.5h
Theoretical Battery Life: About 10h (for different smartphones you installed, it’s slightly different)
Payload Capability: ≤ 260g (after balanced)
Adapter smartphones: iPhone and Android phones (the width of the phone ≤ 88mm )
Packing List

Vimble 3	×1
Tripod	×1
USB-C cable	×1
Portable bag	×1
Manual	×1

Notice:

1. Make sure motor spinning is not blocked by external force when the product is powered on.
2. The product DO NOT contact water or other liquid if the product is not marked waterproof or splash-proof. Waterproof and splash-proof products DO NOT contact sea water or other corrosive liquid.
3. DO NOT disassemble the product except marked detachable. It need send to FeiyuTech after-sales or authorized service center to fix it if you accidently disassemble and cause abnormal work. The relevant costs are borne by user.
4. Prolonged continuous operation may cause the product surface temperature to rise, please operate carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact FeiyuTech after-sales support.

Storage and Maintenance:

1. Keep the product out of the reach of children and pets.
2. DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days.
3. Please storage the product in dry environment.
4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core.
5. Never use the product when the temperature is too high or too low. Official Social Media

http://www.feiyu-tech.com	http://www.twitter.com/feiyutech	https://www.facebook.com/feiyutech	https://www.instagram.com/FeiyuTech	https://www.youtube.com/user /FeiyuChannel

Guilin Feiyu Technology Incorporated Company
www.feiyu-tech.cn 
support@feiyu-tech.com | +86 773-2320865
This document is subject to change without notice.

Documents / Resources

FeiyuTech Vimble 3 3-Axis Handheld Gimbal for Smartphone [pdf] User Guide Vimble 3, 3-Axis Handheld Gimbal for Smartphone, 3-Axis Handheld Gimbal, Handheld Gimbal, Vimble 3, Gimbal

References

• User Manual