FEIYUTECH Vimble 3 Handheld 3-Axis Smartphone Gimbal Stabilizer

Overview

1. Roll axis
2. Cross arm
3. Tilt axis
4. Vertical arm
5. Pan axis
6. Upper trigger button
   (Custom functions in APP)
7. Lower trigger button
8. Handle (Built-in battery)
9. USB-C port for accessories
10. Limitation
    This product does NOT include smartphones.
11. A button
12. B button
13. Zoom button
14. Smartphone holder
15. Extendable rod
    (Extendable range 0~198mm)
16. Joystick
17. Dial
18. Dial the function switching button
19. Status indicator
20. Battery indicator
21. Album button
22. Mode button
23. Shutter button
24. USB-C port
25. Power button
26. 1/4 inch thread hole
27. Tripod

Quick Experience

1. Step1: Unfold and fold
2. Step2：Smartphone Installation
   It is recommended to remove the smartphone case before installation. Keep the logo of the smartphone holder upward. Keep the smartphone holder in the center. If the smartphone is tilted, please move the smartphone left or right to make it horizontal.
3. Step3: Power ON/OFF
   Long press the power button and release it when you hear the tone.

Charging

Please fully charge the battery before powering on the gimbal for the first time.
Connect the USB 2.0 to the USB-C cable to charge. The indicator light is red while charging, and turns green after charging is complete.

Landscape & Portrait Mode Switching

Double click the function button or manually rotate the smartphone holder to switch between landscape and portrait mode. Do not make an anti-clockwise rotation in landscape mode, and Do not make a clockwise rotation in portrait mode.

Extend and Reset the Handle

1. Hold the handle with one hand, and hold the bottom of the pan axis with another hand.
2. Extending: Pull the extendable rod out to a suitable length (Extendable range 0~198mm).
   Reset: Push the upper grip to make the extendable bar down to the handle part.

Tripod

The tripod is attached to the bottom of the gimbal in a rotating manner. According to the needs of shooting, choose whether to install it.

Connection

Bluetooth Connection

Turn on the gimbal.

• Method one: Download and install Feiyu ON App, run the App, and follow the prompts to turn on and connect with the Bluetooth.
• Method two: Turn on the smartphone Bluetooth, and connect the gimbal Bluetooth in the setting of the phone, e.g. FY_Vimble3_xx. (If the Bluetooth can’t be found, please turn off Feiyu ON App in the background.)

App Connection

Download the Feiyu ON App
Scan the QR code to download the app, or search for “Feiyu ON” in the App Store or Google Play. Requires iOS 9.0 or above, Android 6.0 or above.

Common Operation

1. Basic: Vimble 3 can achieve those functions after a balanced gimbal.
2. Bluetooth: New available function achieved after connecting smartphone via Bluetooth with the functions in condition
   • Still available
   • APP: New available function achieved via Feiyu
     1. ON APP with the functions in conditions
     2. still available.

Indicator

Status indicator

Battery indicator

Specification

• Product name: Feiyu Vimble 3 3-Axis Handheld Gimbal for Smartphone
• Product model: VB3
• Max. Tilt Range: -35° ~ +35°
• Max. Roll Range: -50° ~ +50°
• Max. Pan Range: -80° ~ +174°
• Size: About 115×176×65mm (folded)
• Net gimbal Weight: About 387g (not including tripod)
• Battery: 1300mAh
• Charging time: About 2.5h
• Theoretical Battery Life: About 10h (for a different smartphones you installed, it’s slightly different)
• Payload Capability: ≤ 260g (after balanced)
• Adapter smartphones: iPhone and Android phones (the width of the phone ≤ 88mm )

Documents / Resources

FEIYUTECH Vimble 3 Handheld 3-Axis Smartphone Gimbal Stabilizer [pdf] User Guide Vimble 3, Handheld 3-Axis Smartphone Gimbal Stabilizer, Vimble 3 Handheld 3-Axis Smartphone Gimbal Stabilizer

References

• User Manual