COMMPORTALASSISTANT APP
QUICK START GUIDE
Assistant App
- Browse to: https://arvig.net/hostedpbx.
- Click STANDARD USER LOGIN.
- Enter in your 10-digit phone number and password provided to you by your Systems Administrator or an Arvig representative.
- Click on Downloads.
- Click on the Download link.
- You will find the .exe file in the tool bar.
- Click on the .exe link.
- After the Welcome message appears, click on Next.
- Click on Accept.
- Click Next.
- Choose the option that fits best, most often it will be Just Me.
- Click Next.
- Choose Complete.
- Click Next.
- Click Install.
- Click Finish.
- You will need to restart your computer 1 or 2 times, depending upon your PC’s operating system. Be sure to save your work and close all programs before restarting.
- Click Yes if ready to restart.
- If prompted, click Yes to allow the changes.
- You will see changes made to the Task Bar.
- If you have programs open, you may have to look behind other windows to see the below message.
- Enter the information in the 3 fields.
- Complete 10-digit phone number (no spaces).
- Password provided, same format as above.
- Enter the URL: https://voice1.arvig.net
- Click Apply.
- Click OK.
- Example:
- This is where you may need to restart your computer a second time to see the dialer app on the Task Bar.
You are now set up to use the CommPortal App.
©Arvig 2022
218.346.8014 | arvig.net/hostedpbx
Documents / Resources
 |
COMMPORTAL Assistant App [pdf] User Guide Assistant App, Assistant, App |
