ANANDA Speed Sensor Instruction

The content of this information is subject to change without notice

INSTALLATION

1. Check the harness for damage and the connector for loosening or falling.

   
2. Check whether the speed measuring magnet is loose on the spokes.

   

3. Check whether the speed measuring magnet is aligned with the “△”mark of the speed sensor.

   

4. Check whether the distance between the speed measuring magnet and speed sensor is 7-23mm.

   

5. Adjust the speed measuring magnet to meet the above inspection requirements.

   

6. If the problem is still not resolved, replace the speed sensor.

Ananda Drive Techniques Co., Ltd.

Documents / Resources

	ANANDA Speed Sensor [pdf] Instruction Manual Speed Sensor, Sensor
	ANANDA Speed Sensor [pdf] User Manual Speed Sensor, Speed, Sensor

References

• User Manual