Mi Temperature and Humidity Sensor User Manual
Product Overview
Mi Temperature and Humidity Sensor detects and records the ambient temperature and humidity in real-time. You can check the current and historical data via the app. Based on the temperature or humidity changes detected, it can realize automatic control over other smart devices via the hub to intelligently perform various scenarios.
- This product is for indoor use only, and needs to be used along with a device with hub capabilities.
Connecting with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app.
Control your device, and interact it and other smart home devices with Mi Home / Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home / Xiaomi Home” in the app Store to download and install it. Open Mi Home / Xiaomi Home app, tap “+” on the upper right. Select “Mi Temperature and Humidity Sensor”, and then follow prompts to add your device.
The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Installation
Effective Range Test: Press the reset button at the desired location. If the hub beeps, it indicates that the sensor can communicate effectively with the hub.
Option 1: Place it directly in the desired location.
Option 2: Remove the protective film (an additional adhesive sticker can be found inside the box) to stick it at the desired location.
Make sure the surface is clean and dry.
Do not install them on any metal surface.
- Remove the protective film
- Place it directly in the desired location.
Specifications
- Model: WSDCGQ01LM
- Item Dimensions: 36 × 36 × 11.5 mm
- Wireless Connectivity: Zigbee
- Battery Type: CR2032
- Temperature Detection Range & Accuracy: 20°C to 50°C, ±0.3°C
- Humidity Detection Range & Accuracy: 10–90% RH, non condensing , ±3%
- Zigbee Operation Frequency: 2405 MHz–2480 MHz Zigbee Maximum Output Power ＜ 13 dBm
EU Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd., declares that the radio equipment type [Mi Temperature and Humidity Sensor, WSDCGQ01LM] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Documents / Resources
 |
mi Mi Temperature and Humidity Sensor [pdf] User Manual Mi, Temperature, Humidity, Sensor |
