CLEVERIQ Temperature Sensor User Manual
www.cleverio.se
Box 50435, Malmö, Sweden
2019-03-20
Specifications
Device Add for Inclusion
- Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second.
- If Inclusion Process is successful, Green LED will turn off.
Device Remove for Exclusion
- Press the Net_Button 3 times within 1.5s.
- If Exclusion Process is successful, Green LED is Blinking 6 times, then turn off.
Device Remove for Exclusion
- Press the Net_Button 3 times within 1.5s.
- If Exclusion Process is successful, Green LED is Blinking 6 times, then turn off.
Device Factory Reset
- Long press Net_Button at least 10 seconds in the product.
- Device Reset Locally notification is Transmitted.
- Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Association & Association Group Information
- Lifeline between controller and the product
- Supported command classes
Battery Report, Multilevel Sensor Report, and Device Reset Locally notification. - Association Group description
- Association group 1: Lifeline association group
Maximum supported node is 5
Include command classes: Battery report, multilevel sensor report, and Device Reset Locally
Read More About This Manual & Download PDF:
Documents / Resources
 | CLEVERIQ Temperature Sensor [pdf] User Manual CLEVERIQ, 51112, Temperature Sensor |
