Siretta logoKuisa Digital Input uye Digital Output Quartz Router
User Guide

Zviri mukati hide
1 Nhanganyaya
2 Kuedza Basa: -
3 Matanho ekuseta DI-2 (ON).
4 Zvinyorwa / Zvishandiso
4.1 References
5 Related Posts

Nhanganyaya

QUARTZ Routers kubva kuSiretta inoshandisa 2 dhijitari yekupinda uye imwe yedhijitari inobuda, inoshandiswa kushandura ekunze dhijitari mazinga (DI-1 uye DI-2) kubva paRouter uye kugamuchira dhijitari level (DO) kuenda kuRouter. Iyo DI-1, DI-2 uye DO ndeye Dry Contact uye inogona kushandiswa chete pakuchinja, pane kutyaira zvimwe zvekupinza.
Digital Inputs inobvumira iyo QUARTZ Microcontroller kuti ione logic states (yakakwirira kana yakaderera) apo GND yakabatana / yakabviswa kuDI-1/2 Pini dze router. Digital Output inobvumira iyo microcontroller mukati meQUARTZ kuburitsa logic states.
DI-1/2 inodzorwa neGND.

Siretta Setting Digital Input uye Digital Output Quartz Router - 1

Kuwana DI/DO mabasa
DI/DO mashandiro anogona kuwanikwa uye kugadziridzwa paQUARTZ Router nekufamba uchienda kune Administration tebhu pane router GUI (tarisa Quick Start Guide) wozosarudza DI/DO Setting. Mushure mekuvhura iyo DI / DO yekumisikidza peji iwe uchaunzwa neiyo peji senge skrini pazasi.

Siretta Setting Digital Input uye Digital Output Quartz Router - 2

Cherechedza: -MuDI / DO yekumisikidza peji pamusoro pemabhokisi ese akatariswa kuratidza aripo sarudzo isati yagadziriswa yeDI / DO mabasa.
Kugadzirisa DI
Ex uyuample rakagadzirirwa kuti mushandisi agamuchire zviziviso zveSMS kubva kuSiretta router.
Matanho ekuseta DI-1 (OFF).

  1. Tevedza router nekukurumidza kutanga gwara (QSG) yekutanga kuseta router.
  2. Enda kune iyo Administration tab pane router GUI.
  3. Sarudza DI/DO kuseta tebhu.
  4. Tarisa yakagoneswa Port1 bhokisi.
  5. Sarudza Port1Mode OFF (dzimwe sarudzo dziripo ON uye EVENT_COUNTER)
  6. Pinda Sefa 1 (Inogona kuve chero nhamba pakati pe1 -100), kukosha uku kunoshandiswa kudzora mabhaunzi ekuchinja. (Kupinza (1~100) *100ms).
  7. Tarisa SMS Alarm bhokisi.
  8. Pinda zveSMS zvesarudzo yako (mushandisi anotsanangurwa anosvika makumi manomwe ASCII Max) "ON" yakashandiswa pagwaro iri.
  9. Isa mugamuchiri weSMS nhamba1 “XXXXXXXXX” (apo XXXXXXXXX ndiyo nhamba yenharembozha).
  10. Iwe unogona kuwedzera yechipiri nharembozha paSMS inogamuchira num2 ndima kana iwe uchida kugamuchira imwechete chiziviso pane yechipiri nhamba.
  11. Dzvanya Save.
  12. Mirira kuti router itangezve.
  13. Kana reboot yapera, vhura DI/DO kuseta pane router peji, iwe uchaunzwa neiyo skrini pazasi:
    Siretta Setting Digital Input uye Digital Output Quartz Router - 4
  14. Zvirongwa zveDI-1 zvino zvapera

    Kuedza Basa: -

  15. Batanidza DI-1 kuGND Pin (Zvese DI-1 neGND zviri pagirinhi yekubatanidza ye router)
  16. Kana DI-1 neGND zvabatanidzwa, router inotumira SMS "ON" kune nhamba yenhare inotsanangurwa padanho 9 pamusoro.
  17. Zve example, meseji inotumirwa panhamba dzinoti 07776327870.
    Matanho ekuseta DI-1 (ON).
  18. Tevedza router nekukurumidza kutanga gwara (QSG) yekutanga kuseta router.
  19. Enda kune iyo Administration tab pane router GUI.
  20. Sarudza DI/DO kuseta tebhu.
  21. Tarisa yakagoneswa Port1 bhokisi.
  22. Sarudza Port1Mode ON (dzimwe sarudzo dziripo DZIMA uye EVENT_COUNTER)
  23. Pinda Sefa 1 (Inogona kuve chero nhamba pakati pe1 -100), kukosha uku kunoshandiswa kudzora mabhaunzi ekuchinja. (Kupinza (1~100) *100ms).
  24. Tarisa SMS Alarm bhokisi.
  25. Pinda zveSMS zvesarudzo yako (mushandisi anotsanangurwa anosvika makumi manomwe ASCII Max) "OFF" yakashandiswa pagwaro iri.
  26. Isa mugamuchiri weSMS nhamba1 “XXXXXXXXX” (apo XXXXXXXXX ndiyo nhamba yenharembozha).
  27. Iwe unogona kuwedzera yechipiri nharembozha paSMS inogamuchira num2 ndima kana iwe uchida kugamuchira imwechete chiziviso pane yechipiri nhamba.
  28. Dzvanya Save.
  29. Mirira kuti router itangezve.
  30. Kana reboot yapera, vhura DI/DO kuseta pane router peji, iwe uchaunzwa neiyo skrini pazasi.
    Siretta Setting Digital Input uye Digital Output Quartz Router - 5
  31. Zvirongwa zveDI-1 zvino zvapera
  32. Router ichatanga kutumira meseji yeSMS "OFF" kune nharembozha inotsanangurwa padanho 26 pamusoro.
  33. Zve example, meseji inotumirwa panhamba dzinoti 07776327870.
  34. Router inomira kutumira meseji "OFF" kana GND yabatana neDI-1
  35. Zve example, rooter inomira kutumira mameseji kune inotevera nhamba 07776327870 Matanho ekuseta DI-1 (EVENT_COUNTER).
    Iri basa rinofukidzwa neakasiyana Chinyorwa Chekushandisa. Matanho ekuseta DI-2 (OFF).
  36. Tevedza router nekukurumidza kutanga gwara rekutanga kuseta router.
  37. Enda kune iyo Administration tab pane router GUI.
  38. Sarudza DI/DO kuseta tebhu.
  39. Tarisa yakagoneswa Port2 bhokisi.
  40. Sarudza Port2Mode OFF (dzimwe sarudzo dziripo ON uye EVENT_COUNTER)
  41. Pinda Sefa 1 (Inogona kuve chero nhamba pakati pe1 -100), kukosha uku kunoshandiswa kudzora mabhaunzi ekuchinja. (Kupinza (1~100) *100ms).
  42. Tarisa SMS Alarm bhokisi.
  43. Pinda zveSMS zvesarudzo yako (mushandisi anotsanangurwa anosvika makumi manomwe ASCII Max) "ON" yakashandiswa pagwaro iri.
  44. Isa mugamuchiri weSMS nhamba1 “XXXXXXXXX” (apo XXXXXXXXX ndiyo nhamba yenharembozha).
  45. Iwe unogona kuwedzera yechipiri nharembozha paSMS inogamuchira num2 ndima kana iwe uchida kugamuchira imwechete chiziviso pane yechipiri nhamba.
  46. Dzvanya Save.
  47. Mirira kuti router itangezve.
  48. Kana reboot yapera, vhura DI/DO kuseta pane router peji, iwe uchaunzwa neiyo skrini pazasi.
    Siretta Setting Digital Input uye Digital Output Quartz Router - 3
  49. Zvirongwa zveDI-2 zvino zvapera
    Kuedza Basa: -
  50.  Batanidza DI-2 kuGND Pin (Zvese DI-2 neGND zviri pane yakasvibira yekubatanidza ye router).
  51. Kana DI-2 neGND zvabatanidzwa, router inotumira SMS "ON" kune nharembozha inotsanangurwa padanho 45.
  52. Zve example, meseji inotumirwa panhamba dzinoti 07776327870

    Matanho ekuseta DI-2 (ON).

  53. Tevedza router nekukurumidza kutanga gwara (QSG) yekutanga kuseta router.
  54. Enda kune iyo Administration tab pane router GUI.
  55. Sarudza DI/DO kuseta tebhu.
  56. Tarisa yakagoneswa Port2 bhokisi.
  57. Sarudza Port2Mode ON (dzimwe sarudzo dziripo DZIMA uye EVENT_COUNTER)
  58. Pinda Sefa 1 (Inogona kuve chero nhamba pakati pe1 -100), kukosha uku kunoshandiswa kudzora mabhaunzi ekuchinja. (Kupinza (1~100) *100ms).
  59. Tarisa SMS Alarm bhokisi.
  60. Pinda zveSMS zvesarudzo yako (mushandisi anotsanangurwa anosvika makumi manomwe ASCII Max) "OFF" yakashandiswa pagwaro iri.
  61. Isa mugamuchiri weSMS nhamba1 “XXXXXXXXX” (apo XXXXXXXXX ndiyo nhamba yenharembozha).
  62. Iwe unogona kuwedzera yechipiri nharembozha paSMS inogamuchira num2 ndima kana iwe uchida kugamuchira imwechete chiziviso pane yechipiri nhamba.
  63. Dzvanya Save.
  64.  Mirira kuti router itangezve.
  65. Kana reboot yapera, vhura DI/DO kuseta pane router peji, iwe uchaunzwa neiyo skrini pazasi.
    Siretta Setting Digital Input uye Digital Output Quartz Router - 3
  66. Zvirongwa zveDI-2 zvino zvapera
  67. Router ichatanga kutumira meseji yeSMS "OFF" kune nharembozha inotsanangurwa padanho 61
  68. Zve example, meseji inotumirwa panhamba dzinoti 07776327870.
  69.  Router inomira kutumira meseji "KUDZIMA" kana GND Yakabatana neDI-2.
  70. Kana GND neDI-2 zvabatanidzwa, router inomira kutumira SMS "OFF" kune nharembozha inotsanangurwa padanho 61.
  71. Zve exampuye, rooter inomira kutumira mameseji kune inotevera nhamba 07776327870
    Cherechedza: Port1 uye port2 inogona kugoneswa panguva imwe chete uye kushanda panguva imwe chete sezvinoonekwa pazasi
    Siretta Setting Digital Input uye Digital Output Quartz Router - 6Matanho ekuseta DI-2 (EVENT_COUNTER).
    Pagwaro rakasiyana.
    Kugadzirisa DO
    Iyo DO basa rinogona kuwanikwa uye kugadziridzwa pane router nekufamba uchienda kune Administration tab pane router GUI (tarisa RQSG) wozosarudza DI/DO Setting. Mushure mekuvhura iyo DI / DO yekumisikidza peji iwe uchaunzwa neiyo peji senge skrini pazasi.
    Siretta Setting Digital Input uye Digital Output Quartz Router - 7Cherechedza: -Pa DO yekumisikidza peji pamusoro pemabhokisi ese akatariswa kuratidza izvo zviripo sarudzo isati yagadziriswa yeDO basa.
    Matanho ekuseta DO (SMS Control)
  72. Tevedza router nekukurumidza kutanga gwara (QSG) yekutanga kuseta router.
  73. Enda kune iyo Administration tab pane router GUI.
  74. Sarudza DI/DO kuseta tebhu.
  75.  Tarisa "Enabled" bhokisi pane DO kuseta.
  76. Sarudza Alarm Source "SMS Control" (Imwe sarudzo iripo ndeye DI control)
  77. Sarudza Alarm Action "ON" kubva pane yekudonha-pasi menyu (Dzimwe sarudzo dziripo DZIMA & Pulse)
  78. Sarudza Simba PaChimiro "KUDZIMA" (Dzimwe sarudzo iripo INOBATIDZA)
  79. Pinda Chengeta Nguva "2550" (Inoshanda renji 0-2550). Nguva ino kuti alarm irambe iripo.
  80. Pinda SMS Trigger zvemukati "123" yegwaro iri (mushandisi anotsanangurwa anosvika makumi manomwe ASCII Max)
  81. Pinda SMS Reply Content "activate on DO" yegwaro iri (mushandisi anotsanangurwa anosvika makumi manomwe ASCII Max)
  82. Isa SMS admin Num1 "+YYXXXXXXXXX" (apo XXXXXXXXX ndiyo nhamba yefoni
  83. Pinda SMS admin Num1 "+447776327870" yegwaro iri (yeuka kuisa nhamba nekodhi yedunhu pafomati iri pamusoro, +44 ndiyo UK County kodhi)
  84. Iwe unogona kuwedzera yechipiri nhamba yefoni paSMS admin Num2 munda kana iwe uchida kugamuchira imwechete chiziviso pane yechipiri nhamba.
  85. Dzvanya Save.
  86. Mirira kuti router itangezve.
  87. Kana reboot yapera, vhura DI/DO kuseta pane router peji, iwe uchaunzwa neiyo skrini pazasi pane DO kuseta.
    Siretta Setting Digital Input uye Digital Output Quartz Router - 8
  88. Settings yeDO ikozvino yapera.
    Kuedza Basa: -
  89. Shandisa nharembozha inotsanangurwa padanho 82 pamusoro kutumira SMS (meseji) "123" kune nharembozha mukati me router.
  90. Kana "123" yagamuchirwa kune router, router inopindura nemeseji yakapinda padanho 81 pamusoro. (yegwaro iri "activate on DO" rakashandiswa) sekuonekwa pazasi.
    Siretta Setting Digital Input uye Digital Output Quartz Router - 9
  91. Mushure mekugamuchira mhinduro kubva kune router sezvaonekwa pamusoro, ipapo unogona kuyera voltage kushandisa multimeter pakati peGND pini uye DO pini kubva kune router green yekubatanidza.
  92. Ita shuwa kuti Multimeter yakagadzirirwa kuyera yakananga voltage (DC).
  93. Batanidza GND pini kubva kune router kuenda kune yakasviba inotungamira yeMultimeter.
  94. Batanidza DO pini kubva kune router kuenda kune yakatsvuka inotungamira yeMultimeter
  95. Multimeter inofanira kuverenga 5.00V.

Cherechedza: The DO voltage (5.0V Max) inogona kushandiswa kubatidza mamwe maapplication akadai semasensor. DI-1/2 kuita nenzira imwechete sekuoma kubata neSMS zviziviso (voltages inoshandiswa inofanira kuva yepamusoro 5V0. SMS inozivisa kunonoka kwangu nekuda kweiyo cellular network traffics. Nekushandisa zvakanyanyisa voltages kune DI-1/2 pini ichakonzera kukanganisa kune router. Matanho ekuseta DI-1/2 (EVENT_COUNTER) achange ari pagwaro rekushandisa rakasiyana.
Chero ane mibvunzo please contact support@siretta.com

Siretta logoSiretta Limited - Inogonesa Industrial IoT
https://www.siretta.com 
+44 1189 769000 
sales@siretta.com

Zvinyorwa / Zvishandiso

Siretta Setting Digital Input uye Digital Output Quartz Router [pdf] Bhuku reMushandisi
Kuisa Digital Input uye Digital Output Quartz Router, Setting Digital Input uye Digital Output, Setting Digital Input Quartz Router, Digital Output Quartz Router, Quartz Router, Router.

References

Related Posts

Siya mhinduro

Yako email kero haizoburitswa. Nzvimbo dzinodiwa dzakamakwa *