Teem Digital Input thiab Digital Output Quartz Router
Cov neeg siv phau ntawv qhia

Taw qhia

QUARTZ Routers los ntawm Siretta ntiav 2 digital inputs thiab ib qho digital output, siv rau kev hloov cov theem sab nraud (DI-1 thiab DI-2) los ntawm Router thiab lees txais qib digital (DO) rau Router. DI-1, DI-2 thiab DO yog Kev Tiv Thaiv Qhuav thiab tsuas yog siv tau rau kev hloov pauv, tsis yog tsav tsheb lwm yam khoom siv.
Cov Inputs tso cai rau QUARTZ Microcontroller los ntes cov logic xeev (siab lossis qis) thaum GND txuas / txiav tawm mus rau DI-1/2 Pins ntawm lub router. Cov Output tso cai rau lub microcontroller hauv QUARTZ tso tawm cov ntsiab lus logic.
DI-1/2 yog tswj los ntawm GND.

Nkag mus rau DI/DO functions
DI / DO cov haujlwm tuaj yeem nkag mus thiab teeb tsa ntawm QUARTZ Router los ntawm kev mus rau Pawg Thawj Coj ntawm lub router GUI (saib rau Quick Start Guide) ces xaiv DI/DO Setting. Tom qab qhib DI/DO qhov chaw nplooj ntawv koj yuav raug nthuav tawm nrog nplooj ntawv zoo li screenshot hauv qab no.

Nco tseg: - Hauv DI / DO teeb tsa nplooj ntawv saum toj no txhua lub thawv uas tau kuaj xyuas kom pom cov kev xaiv muaj ua ntej kev teeb tsa ntawm DI / DO kev ua haujlwm.
Configuring DI
Qhov no example yog tsim los rau cov neeg siv kom tau txais SMS ceeb toom los ntawm Siretta router.
Cov kauj ruam rau kev teeb tsa DI-1 (OFF).

1. Ua raws li cov lus qhia ceev pib lub router (QSG) rau kev teeb tsa router pib.
2. Coj mus rhaub rau Thawj Tswj tab ntawm router GUI.
3. Xaiv DI/DO teeb tab.
4. Kos lub thawv qhib Port1.
5. Xaiv Port1Mode OFF (lwm cov kev xaiv muaj yog ON thiab EVENT_COUNTER)
6. Nkag mus rau Lim 1 (Yuav ua tau ib tus lej ntawm 1 -100), tus nqi no yog siv los tswj kev hloov bounces. (Input (1 ~ 100) * 100ms).
7. Kos SMS Alarm box.
8. Nkag mus rau SMS cov ntsiab lus ntawm koj xaiv (tus neeg siv tau hais txog 70 ASCII Max) "ON" siv rau phau ntawv qhia no.
9. Sau SMS receiver num1 “XXXXXXXXX” (qhov twg XXXXXXXXX yog tus xov tooj ntawm tes).
10. Koj tuaj yeem ntxiv tus lej xov tooj thib ob ntawm SMS receiver num2 teb yog tias koj xav tau txais tib daim ntawv ceeb toom ntawm tus lej thib ob.
11. Nyem Txuag.
12. Tos rau router reboot.
13. Thaum reboot tiav, qhib DI / DO teeb tsa ntawm nplooj ntawv router, koj yuav raug nthuav tawm nrog cov duab hauv qab no:
    
14. Cov chaw rau DI-1 tam sim no ua tiav
    

    Test Function: -

15. Txuas DI-1 mus rau GND Pin (ob leeg DI-1 thiab GND nyob rau ntawm qhov txuas ntsuab ntawm lub router)
16. Thaum DI-1 thiab GND txuas nrog, lub router yuav xa SMS "ON" rau tus lej xov tooj ntawm tes uas tau teev tseg rau qib 9 saum toj no.
17. Rau qhov no example, cov ntawv xov xwm yuav xa mus rau tus xov tooj hauv qab no 07776327870.
    Cov kauj ruam rau kev teeb tsa DI-1 (ON).
18. Ua raws li cov lus qhia ceev pib lub router (QSG) rau kev teeb tsa router pib.
19. Coj mus rhaub rau Thawj Tswj tab ntawm router GUI.
20. Xaiv DI/DO teeb tab.
21. Kos lub thawv qhib Port1.
22. Xaiv Port1Mode ON (lwm cov kev xaiv muaj yog OFF thiab EVENT_COUNTER)
23. Nkag mus rau Lim 1 (Yuav ua tau ib tus lej ntawm 1 -100), tus nqi no yog siv los tswj kev hloov bounces. (Input (1 ~ 100) * 100ms).
24. Kos SMS Alarm box.
25. Nkag mus rau SMS cov ntsiab lus ntawm koj xaiv (tus neeg siv tau hais txog 70 ASCII Max) "OFF" siv rau phau ntawv qhia no.
26. Sau SMS receiver num1 “XXXXXXXXX” (qhov twg XXXXXXXXX yog tus xov tooj ntawm tes).
27. Koj tuaj yeem ntxiv tus lej xov tooj thib ob ntawm SMS receiver num2 teb yog tias koj xav tau txais tib daim ntawv ceeb toom ntawm tus lej thib ob.
28. Nyem Txuag.
29. Tos rau router reboot.
30. Thaum reboot tiav, qhib DI / DO teeb tsa ntawm nplooj ntawv router, koj yuav raug nthuav tawm nrog lub screenshot hauv qab no.
    
31. Cov chaw rau DI-1 tam sim no ua tiav
32. Router yuav pib tas li xa SMS lus "OFF" rau tus lej xov tooj ntawm tes uas tau teev tseg rau qib 26 saum toj no.
33. Rau qhov no example, cov ntawv xov xwm yuav xa mus rau tus xov tooj hauv qab no 07776327870.
34. Router yuav tsum tsis txhob xa cov lus "OFF" thaum GND txuas nrog DI-1
35. Rau qhov no example, tus rooter yuav tsum tsis txhob xa ntawv mus rau tus xov tooj hauv qab no 07776327870 Cov kauj ruam rau kev teeb tsa DI-1 (EVENT_COUNTER).
    Txoj haujlwm no tau them los ntawm Daim Ntawv Thov Kev Ceeb Toom. Cov kauj ruam rau kev teeb tsa DI-2 (OFF).
36. Ua raws li cov lus qhia ceev pib lub router rau pib teeb tsa router.
37. Coj mus rhaub rau Thawj Tswj tab ntawm router GUI.
38. Xaiv DI/DO teeb tab.
39. Kos lub thawv qhib Port2.
40. Xaiv Port2Mode OFF (lwm cov kev xaiv muaj yog ON thiab EVENT_COUNTER)
41. Nkag mus rau Lim 1 (Yuav ua tau ib tus lej ntawm 1 -100), tus nqi no yog siv los tswj kev hloov bounces. (Input (1 ~ 100) * 100ms).
42. Kos SMS Alarm box.
43. Nkag mus rau SMS cov ntsiab lus ntawm koj xaiv (tus neeg siv tau hais txog 70 ASCII Max) "ON" siv rau phau ntawv qhia no.
44. Sau SMS receiver num1 “XXXXXXXXX” (qhov twg XXXXXXXXX yog tus xov tooj ntawm tes).
45. Koj tuaj yeem ntxiv tus lej xov tooj thib ob ntawm SMS receiver num2 teb yog tias koj xav tau txais tib daim ntawv ceeb toom ntawm tus lej thib ob.
46. Nyem Txuag.
47. Tos rau router reboot.
48. Thaum reboot tiav, qhib DI / DO teeb tsa ntawm nplooj ntawv router, koj yuav raug nthuav tawm nrog cov screenshot hauv qab no.
    
49. Cov chaw rau DI-2 tam sim no ua tiav
    Test Function: -
50.  Txuas DI-2 mus rau GND Pin (ob leeg DI-2 thiab GND nyob rau ntawm qhov txuas ntsuab ntawm lub router).
51. Thaum DI-2 thiab GND txuas nrog, lub router yuav xa SMS "ON" rau tus lej xov tooj ntawm tes uas tau teev tseg hauv kauj ruam 45.
52. Rau qhov no example, cov ntawv xov xwm yuav xa mus rau tus xov tooj hauv qab no 07776327870
    

    Cov kauj ruam rau kev teeb tsa DI-2 (ON).

53. Ua raws li cov lus qhia ceev pib lub router (QSG) rau kev teeb tsa router pib.
54. Coj mus rhaub rau Thawj Tswj tab ntawm router GUI.
55. Xaiv DI/DO teeb tab.
56. Kos lub thawv qhib Port2.
57. Xaiv Port2Mode ON (lwm cov kev xaiv muaj yog OFF thiab EVENT_COUNTER)
58. Nkag mus rau Lim 1 (Yuav ua tau ib tus lej ntawm 1 -100), tus nqi no yog siv los tswj kev hloov bounces. (Input (1 ~ 100) * 100ms).
59. Kos SMS Alarm box.
60. Nkag mus rau SMS cov ntsiab lus ntawm koj xaiv (tus neeg siv tau hais txog 70 ASCII Max) "OFF" siv rau phau ntawv qhia no.
61. Sau SMS receiver num1 “XXXXXXXXX” (qhov twg XXXXXXXXX yog tus xov tooj ntawm tes).
62. Koj tuaj yeem ntxiv tus lej xov tooj thib ob ntawm SMS receiver num2 teb yog tias koj xav tau txais tib daim ntawv ceeb toom ntawm tus lej thib ob.
63. Nyem Txuag.
64.  Tos rau router reboot.
65. Thaum reboot tiav, qhib DI / DO teeb tsa ntawm nplooj ntawv router, koj yuav raug nthuav tawm nrog cov screenshot hauv qab no.
    
66. Cov chaw rau DI-2 tam sim no ua tiav
67. Router yuav pib tas li xa SMS lus "OFF" rau tus lej xov tooj ntawm tes uas tau teev tseg hauv kauj ruam 61
68. Rau qhov no example, cov ntawv xov xwm yuav xa mus rau tus xov tooj hauv qab no 07776327870.
69.  Router yuav tsum tsis txhob xa cov lus "OFF" thaum GND txuas nrog DI-2.
70. Thaum GND thiab DI-2 txuas nrog, lub router yuav tsum tsis txhob xa SMS "OFF" rau tus lej xov tooj ntawm tes uas tau teev tseg hauv kauj ruam 61.
71. Rau qhov no example, tus rooter yuav tsum tsis txhob xa ntawv mus rau tus xov tooj hauv qab no 07776327870
    Nco tseg: Port1 thiab port2 tuaj yeem qhib rau tib lub sijhawm thiab ua haujlwm ib txhij raws li pom hauv qab no
    Cov kauj ruam rau kev teeb tsa DI-2 (EVENT_COUNTER).
    Ntawm cov ntaub ntawv cais.
    Configuring DO
    DO muaj nuj nqi tuaj yeem nkag mus thiab teeb tsa ntawm lub router los ntawm kev mus rau Pawg Thawj Coj ntawm lub router GUI (saib RQSG) tom qab ntawd xaiv DI / DO Chaw. Tom qab qhib DI/DO qhov chaw nplooj ntawv koj yuav raug nthuav tawm nrog nplooj ntawv zoo li screenshot hauv qab no.
    Nco tseg: - Ntawm DO teeb nplooj ntawv saum toj no tag nrho cov thawv uas tau kuaj xyuas kom pom tias muaj kev xaiv dab tsi ua ntej kev teeb tsa ntawm DO muaj nuj nqi.
    Cov kauj ruam rau kev teeb tsa DO (SMS Control)
72. Ua raws li cov lus qhia ceev pib lub router (QSG) rau kev teeb tsa router pib.
73. Coj mus rhaub rau Thawj Tswj tab ntawm router GUI.
74. Xaiv DI/DO teeb tab.
75.  Kos "Enabled" lub thawv ntawm DO teeb tsa.
76. Xaiv lub tswb "SMS Control" (Lwm qhov kev xaiv muaj yog DI tswj)
77. Xaiv Alarm Action "ON" los ntawm cov ntawv qhia zaub mov poob (Lwm yam muaj kev xaiv yog OFF & Pulse)
78. Xaiv Lub Hwj Chim Ntawm Txoj Cai "OFF" (Lwm qhov kev xaiv muaj yog ON)
79. Nkag mus rau Lub Sijhawm "2550" (Ua tau ntau yam 0-2550). Lub sijhawm no rau lub tswb kom nyob twj ywm.
80. Nkag mus rau SMS Trigger cov ntsiab lus "123" rau phau ntawv qhia no (tus neeg siv tau txiav txim siab txog 70 ASCII Max)
81. Nkag mus rau SMS Teb Cov ntsiab lus "ua haujlwm ntawm DO" rau cov lus qhia no (tus neeg siv tau txiav txim siab txog 70 ASCII Max)
82. Sau SMS admin Num1 “+YYXXXXXXXXX” (qhov twg XXXXXXXXX yog tus xov tooj ntawm tes
83. Sau SMS admin Num1 “+447776327870” rau phau ntawv qhia no (nco ntsoov sau tus lej nrog lub nroog code ntawm hom ntawv saum toj no, +44 yog UK county code)
84. Koj tuaj yeem ntxiv tus lej xov tooj thib ob ntawm SMS admin Num2 teb yog tias koj xav tau txais kev ceeb toom tib yam ntawm tus lej thib ob.
85. Nyem Txuag.
86. Tos rau router reboot.
87. Thaum reboot tiav, qhib DI / DO teeb tsa ntawm nplooj ntawv router, koj yuav raug nthuav tawm nrog lub screenshot hauv qab no ntawm DO teeb.
    
88. Cov chaw rau DO tam sim no ua tiav.
    Test Function: -
89. Siv tus lej xov tooj ntawm tes uas tau teev tseg hauv kauj ruam 82 saum toj no txhawm rau xa SMS (ntawv xov xwm) "123" rau tus lej xov tooj hauv lub router.
90. Thaum "123" tau txais mus rau lub router, router yuav teb nrog cov lus nkag mus rau qib 81 saum toj no. (rau phau ntawv qhia no "activate on DO" siv) raws li pom hauv qab no.
    
91. Tom qab tau txais lus teb los ntawm router raws li pom saum toj no, koj tuaj yeem ntsuas voltage siv multimeter ntawm GND tus pin thiab DO tus pin los ntawm router ntsuab txuas.
92. Xyuas kom tseeb tias lub Multimeter yog teem los ntsuas ncaj qha voltage (DC).
93. Txuas GND tus pin los ntawm router mus rau cov hlau lead dub ntawm Multimeter.
94. Txuas DO tus pin ntawm lub router mus rau cov hlau lead liab ntawm Multimeter
95. Multimeter yuav tsum nyeem 5.00V.

Note: DO voltage (5.0V Max) tuaj yeem siv los tig rau lwm yam kev siv xws li sensors. DI-1/2 ua tib yam li kev sib cuag qhuav nrog SMS ceeb toom (voltages thov yuav tsum siab tshaj 5V0. SMS ceeb toom kuv qeeb vim yog lub xov tooj ntawm tes kev khiav tsheb. Los ntawm kev siv ntau dhau voltages rau DI-1/2 pins yuav ua rau kev puas tsuaj rau lub router. Cov kauj ruam rau kev teeb tsa DI-1/2 (EVENT_COUNTER) yuav nyob ntawm daim ntawv thov cais.
Txhua yam lus nug thov hu rau support@siretta.com

Siretta Limited - Ua kom muaj kev lag luam IoT
https://www.siretta.com 
+44 1189 769000 
sales@siretta.com

Cov ntaub ntawv / Cov ntaub ntawv

Siretta Teem Digital Input thiab Digital Output Quartz Router [ua pdf] Cov neeg siv phau ntawv qhia Kev teeb tsa Digital Input thiab Digital Output Quartz Router, Teeb Digital Input thiab Digital Output, Teeb Digital Input Quartz Router, Digital Output Quartz Router, Quartz Router, Router

Cov ntaub ntawv

• Cov neeg siv phau ntawv