NATIONAL Instruments NI 6711 PXI Analog Output Module

Product Information

• Product Name: PCI-6731
• Mugadziri: Zviridzwa Zvenyika
• Model Numbers: 6711, 6713, 6731, 6733
• Tsanangudzo: Iyo PCI-6731 ndeye analog kubuda (AO) mudziyo unoshandiswa muPCI/PXI/CompactPCI masisitimu. Inogadzirwa neNational Instruments uye chikamu cheiyo 671x/673x akatevedzana. Chishandiso chinoda calibration kuchengetedza kurongeka nekufamba kwenguva uye tembiricha kusiyana.

Nhanganyaya

Gwaro iri rine nhanho-ne-nhanho mirairo ye calibrating National Instruments 6711/6713/6731/6733 yePCI/PXI/CompactPCI analog kubuda (AO) zvishandiso. Shandisa iyi calibration maitiro pamwe chete ne671xCal.dllfile, iyo ine chaiwo mabasa anodiwa pakuenzanisa NI 6711/6713/6731/6733 zvishandiso.
Cherechedza Tarisa kuna ni.com/support/calibrat/mancal.htmfor kopi yeni671xCal.dllfile.

Chii chinonzi Calibration?

Calibration inosanganisira yekuona kuyerwa kwechiyero chemudziyo uye kugadzirisa chero chipiro chekuyera. Verification kuyera kuita kwechishandiso uye kuenzanisa zviyero izvi kune zvakatemwa fekitori. Panguva yekuenzanisa, unopa nekuverenga voltage mazinga uchishandisa ekunze zviyero, wobva wagadzirisa iyo module calibration constants. Iwo matsva ekugadzirisa magadzirirwo anochengetwa muEEPROM. Iyo calibration constants inotakurwa kubva mundangariro sezvinodiwa kugadzirisa kukanganisa muzviyero zvakatorwa nemudziyo.
Sei Uchifanira Kugadzirisa?
Kurongeka kwezvinhu zvemagetsi zvinonyungudika nenguva uye tembiricha, izvo zvinogona kukanganisa kuyerwa kwechiyero sezvo mudziyo unokura. Calibration inodzoreredza zvinhu izvi kune kwayo kwakatarwa uye inova nechokwadi chekuti mudziyo uchiri kusangana neNI zviyero.
Unofanira Kugadzirisa Kazhinji Sei?
Izvo zvinodikanwa zvekuyerwa zvechikumbiro chako zvinotarisa kuti kangani iyo NI 6711/6713/6731/6733 inofanira kuverengerwa kuti ichengetedze chokwadi. NI inokurudzira kuti uite calibration yakakwana kamwechete pagore. Unogona kupfupisa nguva iyi kusvika kumazuva makumi mapfumbamwe kana mwedzi mitanhatu zvichienderana nezvido zvechikumbiro chako.

Calibration Sarudzo: Zvekunze Versus Zvemukati

Iyo NI 6711/6713/6731/6733 ine sarudzo mbiri dzekugadzirisa: yemukati, kana yekuzvigadzirisa, uye yekunze calibration.

Internal Calibration
Internal calibration inzira yakapfava zvikuru yekuenzanisa iyo isingavimbi nezviyero zvekunze. Nenzira iyi, zvigadziriso zvekugadzirisa zvigadziridzo zvinogadziriswa maererano nepamusoro-soro voltage source pa
NI 6711/6713/6731/6733. Rudzi urwu rwekugadzirisa runoshandiswa mushure mekunge mudziyo wagadziriswa maererano nechiyero chekunze. Zvisinei, zvinhu zvekunze zvakadai sekushisa zvinogona kukanganisa zviyero. Izvo zvitsva zvekugadzirisa zvigadziriswe zvinotsanangurwa maererano nekugadzirisa zvigadziriso zvakagadzirwa panguva yekunze kwekugadzirisa, kuve nechokwadi chokuti zviyero zvinogona kuteverwa kumashure kune kunze kwemaitiro. Muchidimbu, kuenzanisa kwemukati kwakafanana neauto-zero basa rinowanikwa padigital multimeter (DMM).
External Calibration
Kugadziriswa kwekunze kunoda kushandisa yakakwirira-chaiyo DMM. Munguva yekuenzanisa kwekunze, iyo DMM inopa uye inoverenga voltages kubva pachigadzirwa. Kugadziridzwa kunoitwa kune iyo kifaa calibration constants kuti ive nechokwadi chekuti yakashumwa voltages inowira mukati meiyo kifaa yakatarwa. Iwo matsva ekugadzirisa magadzirirwo anobva achengetwa mumudziyo EEPROM. Mushure mekunge onboard calibration constants yagadziriswa, iyo yakakwirira-chaiyo voltage sosi pane mudziyo inogadziriswa. Iyo yekunze calibration inopa seti yecalibration constants yaunogona kushandisa kutsiva chikanganiso muzviyero zvakatorwa neNI 6711/6713/6731/6733.

Equipment uye Zvimwe Zvinoda Kuedzwa

Ichi chikamu chinotsanangura zvishandiso, mamiriro ekuyedzwa, zvinyorwa, uye software yaunoda kuenzanisa iyo NI 6711/6713/6731/6733.
Test Equipment
Kuti uenzanise iyo NI 6711/6713/6731/6733, unoda yakakwira-chaiyo DMM inenge 10 ppm (0.001%) yakarurama. NI inokurudzira kuti ushandise iyo Agilent 3458A DMM yekuenzanisa.
Kana iwe usina Agilent 3458A DMM, shandisa iyo chaiyo yakatarwa kusarudza inotsiva calibration mwero.
Kana iwe usina tsika yekubatanidza hardware, ungangoda chekubatanidza senge NI CB-68 uye tambo yakaita seSH6868-D1. Izvi zvikamu zvinokupa iwe nyore kuwana kune ega mapini pane 68-pini I/O yekubatanidza.
Test Conditions
Tevedza aya madhairekitori kukwidziridza kubatana uye bvunzo mamiriro panguva yecalibration:

• Chengetedza zvinongedzo kuNI 6711/6713/6731/6733 pfupi. Tambo dzakareba newaya dzinoita sema antennae, dzichisimudza ruzha rwakawedzerwa, rwunogona kukanganisa kuyerwa.
• Shandisa shielded copper wire kune ese matambo ekubatanidza kune mudziyo.
• Shandisa waya yakamonyoroka kuti ubvise ruzha uye kupisa kwemoto.
• Chengetedza tembiricha iri pakati pe18 ne28 °C. Kuti ushandise module pane imwe tembiricha iri kunze kwerenji iyi, gadzirisa mudziyo patembiricha iyoyo.
• Chengetedza hunyoro huri pasi pe80%.
• Bvumira nguva yekudziya-inokwana maminetsi gumi nemashanu kuve nechokwadi chekuti kuyerwa kwedunhu kuri patembiricha yekushanda yakagadzikana.

Software
Nekuti iyo NI 6711/6713/6731/6733 iri PC-yakavakirwa kuyerwa mudziyo, unofanirwa kuve neakakodzera mutyairi wemudziyo akaiswa mucalibration system usati waedza kugadzirisa. Kune iyi calibration maitiro, unoda NI-DAQ vhezheni 6.9.2 kana kuti yakamboiswa pacalibration komputa. NI-DAQ, iyo inogadzirisa uye inodzora iyo NI 6711/6713/6731/6733, inowanikwa pa ni.com/downloads.
NI-DAQ inotsigira akati wandei ekuronga mitauro, kusanganisira LabVIEW, LabWindows/CVI, Microsoft Visual C++, Microsoft Visual Basic uye Borland C++. Paunoisa mutyairi, unongoda kuisa rutsigiro rwemutauro wechirongwa wauri kuda kushandisa.
Iwe zvakare unoda makopi eiyo ni671xCal.dll, ni671xCal.lib, uye ni671xCal.hfiles.
Iyo DLL inopa calibration mashandiro ayo asingagare mukati
NI-DAQ, kusanganisira kugona kuchengetedza macalibration constants, gadziridza zuva recalibration, uye nyorera kune fekitori calibration nzvimbo. Unogona kuwana mabasa ari muDLL iyi kuburikidza nechero 32-bit compiler. Nzvimbo yekuyeresa fekitori uye zuva rekuyeresa zvinofanirwa kungogadziriswa nerabhoritari yemametroology kana imwe nzvimbo inochengeta zviyero zvinorongeka.
Kugadzirisa iyo NI 6711/6713/6731/6733
Iyo NI 6711/6713/6731/6733 inofanira kugadzirwa muNI-DAQ, iyo inongoona mudziyo. Matanho anotevera anotsanangura muchidimbu maitiro ekugadzirisa mudziyo muNI-DAQ. Tarisa kune iyo NI 671X/673X Mushandisi Manual kuti uwane yakadzama yekuisa mirairo. Unogona kuisa bhuku iri paunoisa NI-DAQ.

1. Simbisa komputa.
2. Isa iyo NI 6711/6713/6731/6733 mune inowanikwa slot.
3. Simba pakombiyuta.
4. Tangisa kuyerwa uye otomatiki Explorer (MAX).
5. Gadzirisa iyo NI 6711/6713/6731/6733 nhamba yemudziyo.
6. Dzvanya Test Zviwanikwa kuti uve nechokwadi chekuti NI 6711/6713/6731/6733 iri kushanda nemazvo.

Iyo NI 6711/6713/6731/6733 ikozvino yakagadziridzwa.
Cherechedza Mushure mekunge mudziyo wagadziriswa muMAX, mudziyo unopihwa nhamba yemudziyo, iyo inoshandiswa mune yega yega yebasa rekufona kuti uone kuti ndeipi DAQ mudziyo wekugadzirisa.

Kunyora Maitiro Ekugadzirisa

Iyo calibration maitiro muCalibrating iyo NI 6711/6713/6731/6733 chikamu chinopa nhanho-ne-nhanho mirairo yekudaidza iyo yakakodzera calibration mabasa. Aya macalibration mabasa eC basa mafoni kubva kuNI-DAQ ayo anoshandawo kuMicrosoft Visual Basic uye Microsoft Visual C++ zvirongwa. Kunyangwe LabVIEW MaVI haana kukurukurwa mune iyi maitiro, unogona kuronga muLabVIEW uchishandisa maVI ane mazita akafanana kune NI-DAQ basa rinofona mune iyi maitiro. Tarisa kune Flowcharts chikamu chemifananidzo yekodhi inoshandiswa pane imwe neimwe nhanho yemaitiro ekugadzirisa.
Kazhinji iwe unofanirwa kutevedzera akati wandei-akananga matanho ekugadzira application inoshandisa NI-DAQ. Tarisa kune iyo NI-DAQ Mushandisi Manual yePC Inoenderana pa ni.com/manualsfor ruzivo nezve nhanho dzinodiwa kune yega yega inotsigirwa compiler.
Mazhinji emabasa akanyorwa mune yecalibration maitiro anoshandisa akasiyana anotsanangurwa mu nidaqcns.hfile. Kuti ushandise izvi zvakasiyana-siyana, unofanira kusanganisira iyo nidaqcns.hfile mukodhi. Kana iwe usingade kushandisa aya akasiyana tsananguro, unogona kuongorora basa rekufona mazita mu
NI-DAQ zvinyorwa uye nidaqcns.hfile kuti uone kuti ndezvipi zvakakosha zvekupinza zvinodiwa.
Zvinyorwa
Kuti uwane ruzivo nezve NI-DAQ, tarisa kune anotevera zvinyorwa:

• NI-DAQ Function Reference Rubatsiro (Tanga»Zvirongwa»National Instruments»NI-DAQ»NI-DAQ Rubatsiro)
• NI-DAQ User Manual yePC Inoenderana pa ni.com/manuals

Aya magwaro maviri anopa ruzivo rwakadzama nezvekushandisa NI-DAQ. The function reference help inosanganisira ruzivo rwemabasa ari mukati
NI-DAQ. Bhuku remushandisi rinopa mirairo yekuisa nekugadzirisa DAQ zvishandiso uye ruzivo rwakadzama pakugadzira maapplication anoshandisa NI-DAQ. Aya magwaro ndiwo mareferensi ekutanga ekunyora iyo calibration utility. Kuti uwane rumwe ruzivo nezve mudziyo wauri kuyera, ungangoda kuisa magwaro emudziyo.

Calibrating iyo NI 6711/6713/6731/6733

Kuti uenzanise iyo NI 6711/6713/6731/6733, zadzisa matanho anotevera:

1. Simbisa mashandiro eNI 6711/6713/6731/6733. Iyi nhanho, iyo inotsanangurwa muKusimbisa Kuitwa kweNI 6711/6713/6731/6733 chikamu, inosimbisa kana mudziyo uri mune yakatarwa isati yagadziriswa.
2. Gadzirisa iyo NI 6711/6713/6731/6733 calibration constants maererano nevolver inozivikanwa.tage source. Iyi nhanho inotsanangurwa muKugadzirisa iyo NI 6711/6713/6731/6733 chikamu.
3. Ongororazve mashandiro kuti uve nechokwadi chekuti NI 6711/6713/6731/6733 iri kushanda mukati mezvakatemwa mushure mekugadzirisa.

Kuongorora Kuita kweNI 6711/6713/6731/6733

Verification inotaridza kuti mudziyo urikuzadzisa zvakadii. Nzira yekuongorora yakakamurwa kuita mabasa makuru echigadzirwa. Munguva yese yekusimbisa maitiro, tarisa kumatafura ari muChikamu cheSpecification kuti uone kana chishandiso ichida kugadziriswa.
Kuongorora Analog Output
Iyi nzira inosimbisa kushanda kweAO kweNI 6711/6713/6731/6733. NI inokurudzira kuyedza nzira dzese dzemudziyo. Nekudaro, kuchengetedza nguva, unogona kuyedza chete nzira dzinoshandiswa mukushandisa kwako. Ita shuwa kuti waverenga Equipment and Other Test Requirements chikamu usati watanga maitiro aya.

1. Bvisa tambo dzese kumudziyo. Ita shuwa kuti mudziyo hauna kubatana kune chero maseketi kunze kweaya anotsanangurwa neiyo calibration maitiro.
2. Kugadzirisa mukati memudziyo, fonera iyo Calibrate_E_Series basa neanotevera ma paramita akaiswa sezvakaratidzwa:
   • calOP yakaiswa ku ND_SELF_CALIBRATE
   • setOfCalConst yakaiswa kuND_USER_EEPROM_AREA
   • calRefVolts yakaiswa ku0
3. Batanidza iyo DMM kuDAC0OUT sezvakaratidzwa muTable 1.
   

   Output Channel	DMM Positive Input	DMM Negative Input
   DAC0OUT	DAC0OUT (pini 22)	AOGND (pini 56)
   DAC1OUT	DAC1OUT (pini 21)	AOGND (pini 55)
   DAC2OUT	DAC2OUT (pini 57)	AOGND (pini 23)
   DAC3OUT	DAC3OUT (pini 25)	AOGND (pini 58)
   DAC4OUT	DAC4OUT (pini 60)	AOGND (pini 26)
   DAC5OUT	DAC5OUT (pini 28)	AOGND (pini 61)
   DAC6OUT	DAC6OUT (pini 30)	AOGND (pini 63)
   DAC7OUT	DAC7OUT (pini 65)	AOGND (pini 63)
   Cherechedza: Nhamba dzepini dzinopihwa 68-pini I/O zvibatanidza chete. Kana uri kushandisa 50-pini I/O yekubatanidza, tarisa kune mudziyo wekushandisa bhuku renzvimbo dzekubatanidza chiratidzo.

4. Tarisa kune tafura kubva kuSpecifications chikamu chinoenderana nemudziyo wauri kuongorora. Iyi tafura yekutsanangurwa inoratidza ese anogamuchirwa marongero emudziyo.
5. Fonera AO_Configure kuti ugadzirise mudziyo wenhamba yemudziyo wakakodzera, chiteshi, uye kubuda polarity (iyo NI 6711/6713/6731/6733 zvishandiso zvinotsigira chete bipolar kubuda renji). Shandisa chiteshi 0 sechiteshi kuti uone. Verenga zvigadziriso zvasara kubva patafura yezvirongwa zvemudziyo.
6. Fonera AO_VWrite kuti uvandudze iyo AO chiteshi neakakodzera voltage. Iyo voltagkukosha kwe e kuri mutafura yekutsanangurwa.
7. Enzanisa kukosha kwemhedzisiro inoratidzwa neDMM kune yepamusoro uye yakaderera miganho patafura yekutsanangurwa. Kana kukosha kunowira pakati pemiganhu iyi, chigadziro chakapfuura muedzo.
8. Dzokorora matanho 3 kusvika ku5 kusvikira waedza zvose zvakakosha.
9. Bvisa iyo DMM kubva kuDAC0OUT, woibatanidza zvakare kune inotevera chiteshi, uchiita zvinongedzo kubva paTafura 1.
10. Dzokorora nhanho 3 kusvika 9 kusvika waona machaneli ese.
11. Bvisa iyo DMM kubva pachigadzirwa.

Iwe zvino waona maAO machani emudziyo.

Kuongorora Kuita kweCounter

Iyi nzira inosimbisa kushanda kwekaunda. Iyo NI 6711/6713/6731/6733 midziyo ine nguva imwe chete yekuongorora, saka unongoda kuongorora counter 0. Nekuti haugone kugadzirisa iyi nguva, unogona kungoona kushanda kwekaunda 0. Iva shuwa kuti waverenga Equipment uye Zvimwe Zviyero Zvinodiwa chikamu, uye wotevera maitiro aya:

1. Batanidza counter positive input kuGPCTR0_OUT (pini 2) nepakaunda negative input kuDGND (pini 35).
   Cherechedza Nhamba dzepini dzinopihwa 68-pini I/O zvibatanidza chete. Kana uri kushandisa 50-pini I/O yekubatanidza, tarisa kune magwaro emudziyo enzvimbo dzekubatanidza chiratidzo.
2. Fonera GPCTR_Controlwith action set to ND_RESETkuisa counter in a default state.
3. Fonera GPCTR_Set_Application ine application yakaiswa kuND_PULSE_TRAIN_GNR kuti ugadzirise kaunda yekugadzira pulse-chitima.
4. Fonera GPCTR_Change_Parameter ine paramID yakaiswa ku ND_COUNT_1 uye paramValue yakaiswa ku 2 kugadzirisa kaunda kuti ibudise puruzi ine nguva yekusashanda ye100 ns.
5. Fonera GPCTR_Change_Parameter ine paramID yakaiswa ku ND_COUNT_2 uye paramValue yakaiswa ku 2 kugadzirisa kaunda kuti ibudise puruzi ine nguva ye100 ns.
6. Fonera Select_Signwith siginecha nenzvimbo yakaiswa kuND_GPCTR0_OUTPUT kuti uendese siginecha yekaunda kuenda kuGPCTR0_OUT pini pamudziyo weI/O connector.
7. Fonera GPCTR_Controlwith action set to ND_PROGRAM kutanga chizvarwa chesquare wave. Chishandiso chinotanga kugadzira 5 MHz square wave kana GPCTR_Control inopedza kuurayiwa.
8. Enzanisa kukosha kwakaverengwa nekaunda kune mipimo yebvunzo inoratidzwa mutafura yakakodzera muChikamu cheMashoko. Kana kukosha kunowira pakati pemiganhu iyi, chigadziro chakapfuura muedzo uyu.
9. Bvisa kaunda kubva pamudziyo.

Waona kaunda yemudziyo.

Kugadzirisa iyo NI 6711/6713/6731/6733

Iyi nzira inogadzirisa AO calibration constants. Pakupera kwega rega rekugadzirisa maitiro, izvi zvitsva zvinogara zvakachengetwa munzvimbo yefekitori yemudziyo EEPROM. Wekupedzisira-mushandisi haakwanise kugadzirisa aya hunhu, izvo zvinopa mwero wechengetedzo inoita kuti vashandisi vasawane netsaona kana kushandura chero calibration constants inogadziriswa ne metrology laboratory.
Iyi nhanho mukugadzirisa maitiro inodaidza mabasa muNI-DAQ uye mukati
iyo ni671x.dll. Kuti uwane rumwe ruzivo nezve mabasa ari mu ni671x.dll, tarisa kune zvakataurwa mu ni671x.hfile.

1. Bvisa tambo dzese kumudziyo. Ita shuwa kuti mudziyo hauna kubatana kune chero maseketi kunze kweaya anotsanangurwa neiyo calibration maitiro.
2. Kugadzirisa mukati memudziyo, fonera iyo Calibrate_E_Series basa neanotevera ma paramita akaiswa sezvakaratidzwa:
   • calOP yakaiswa ku ND_SELF_CALIBRATE
   • setOfCalConst yakaiswa kuND_USER_EEPROM_AREA
   • calRefVolts yakaiswa ku0
3. Batanidza calibrator kune mudziyo maererano Tafura 2.
   

   6711/6713/6731/6733 Pini	Calibrator
   EXTREF (pini 20)	Output High
   AOGND (pini 54)	Kubuda kwakaderera
   Nhamba dzepini dzinopihwa 68-pini yekubatanidza chete. Kana uri kushandisa 50-pini yekubatanidza, tarisa kune magwaro emudziyo enzvimbo dzekubatanidza chiratidzo.

4. Kuti uzive zuva rekupedzisira calibration, fonera Get_Cal_Date, iyo inosanganisirwa mu ni671x.dll.
5. CalDate inochengetedza zuva rakapedzisira kugadziriswa mudziyo.
   Seta calibrator kuti ibudise voltage ye5.0 V.
6. Fonera Calibrate_E_Series nemaparamita anotevera akaiswa sezvakaratidzwa:
   • calOP yakaiswa ku ND_EXTERNAL_CALIBRATE
   • setOfCalConst yakaiswa kuND_USER_EEPROM_AREA
   • calRefVolts yakaiswa ku5.0
     Cherechedza Kana voltage yakapihwa nesosi haichengetedze yakatsiga 5.0 V, unogamuchira kukanganisa.
7. Fonera Copy_Constto kukopa zvigadziriso zvitsva kuchikamu chakadzivirirwa fekitori cheEEPROM. Iri basa rinovandudzawo zuva rekugadzirisa.
8. Bvisa calibrator kubva pachigadzirwa.
   Chigadzirwa chacho zvino chagadziriswa maererano nekunze kwekunze. Mushure mekunge mudziyo wagadziriswa, unogona kuona kushanda kweAO nekudzokorora Verifying Analog Output chikamu.

Zvinotsanangurwa

Matafura anotevera ndeechokwadi chekushandisa paunenge uchisimbisa uye kugadzirisa iyo NI 6711/6713/6731/6733. Iwo matafura anoratidza zvakatemwa zvegore rimwechete uye 1-awa yekuenzanisa nguva.

Kushandisa Matafura

Tsanangudzo dzinotevera dzinotsanangura mashandisirwo ematafura ezvirevo muchikamu chino.
Range
Range inoreva huwandu hunotenderwa voltage huwandu hwechiratidzo chekupinda kana kubuda. For example, kana mudziyo ukagadzirwa mubipolar modhi ine huwandu hwe20 V, mudziyo unogona kunzwa masaini ari pakati pe +10 ne -10 V.
Polarity
Polarity (polarity) zvinoreva vhoriyamu yakanaka uye yakaipatages yechiratidzo chekupinza chinogona kuverengwa. Bipolar zvinoreva kuti mudziyo unogona kuverenga zvese zvakanaka uye zvisina kunaka voltages. Unipolar zvinoreva kuti mudziyo unogona kuverenga chete zvakanaka voltages.
Kwayedza Point
Test Point ndiro voltage kukosha iyo inopinza kana inobuda nechinangwa chekuongorora. Ukoshi uhwu hwakaputswa kuita Nzvimbo uye Kukosha. Nzvimbo inoreva uko kukosha kwebvunzo kunokwana mukati meyedzo range. Pos FS inoreva yakanaka yakazara-chiyero, uye Neg FS inoreva yakaipa yakazara-chiyero. Value inoreva voltage kusimbiswa, uye Zero inoreva kuburitsa zero volts.
24-Hour Ranges
Iyo 24-Hour Range column ine miganho yepamusoro uye yakaderera miganho yebvunzo point kukosha. Kana iyo mudziyo yakagadziriswa mumaawa makumi maviri nemana apfuura, kukosha kwekuyedza kunofanirwa kuwira pakati peiyo yepamusoro uye yakaderera muganho wemuganho. Iyi miganho yakakosha inoratidzirwa mumavolts.
1-Yegore Ranges
Iyo 1-Year Range column ine miganho yepamusoro uye yakaderera miganho yebvunzo point kukosha. Kana chishandiso chave chakaverengerwa mugore rapfuura, kukosha kweyekuyedza kunofanirwa kudonha pakati pepamusoro nepasi pemuganho wetsika. Iyi miganho inoratidzwa mumavolts.
Counters
Nekuti haugone kugadzirisa kugadzirisa kwekaunda/nguva, izvi zvakakosha hazvina 1-gore kana 24-awa yekuenzanisa nguva. Nekudaro, iyo bvunzo poindi uye yepamusoro uye yakaderera miganho inopihwa kune yekusimbisa zvinangwa.
Analog Output yeNI 6711/6713

Range (V)	Polarity	Test Point		24-Hour Ranges		1-Yegore Ranges
		Nzvimbo	Value (V)	Lower Muganho (V)	Upper Muganho (V)	Lower Muganho (V)	Upper Muganho (V)
0	Bipolar	Zero	0.0	–0.0059300	0.0059300	–0.0059300	0.0059300
20	Bipolar	Pos FS	9.9900000	9.9822988	9.9977012	9.9818792	9.9981208
20	Bipolar	Neg FS	–9.9900000	–9.9977012	–9.9822988	–9.9981208	–9.9818792

Analog Output yeNI 6731/6733

Range (V)	Polarity	Test Point		24-Hour Ranges		1-Yegore Ranges
		Nzvimbo	Value (V)	Lower Muganho (V)	Upper Muganho (V)	Lower Muganho (V)	Upper Muganho (V)
0	Bipolar	Zero	0.0	–0.0010270	0.0010270	–0.0010270	0.0010270
20	Bipolar	Pos FS	9.9900000	9.9885335	9.9914665	9.9883636	9.9916364
20	Bipolar	Neg FS	–9.9900000	–9.9914665	–9.9885335	–9.9916364	–9.9883636

Counter

Set Poindi (MHz)	Upper Limit (MHz)	Lower Limit (MHz)
5	4.9995	5.0005

Flowcharts

Aya machati anoyerera anoratidza yakakodzera NI-DAQ basa rinofona rekuona uye kugadzirisa iyo NI 6711/6713/6731/6733. Tarisa kuCalibrating iyo NI 6711/6713/6731/6733 chikamu, iyo NI-DAQ Function Reference Rubatsiro (Tanga»Zvirongwa»National Instruments»NI-DAQ» NI-DAQ Rubatsiro), uye NI-DAQ User Manual yePC Inowirirana. pa ni.com/manuals kune rumwe ruzivo nezve software chimiro.

• Kuongorora Analog Output
• Verifying the Counter
• Kugadzirisa iyo NI 6711/6713/6731/6733

Zvinyorwa / Zvishandiso

NATIONAL Instruments NI 6711 PXI Analog Output Module [pdf] Bhuku reMirayiridzo PCI-6731, NI 6711-6713-6731-6733, NI 6711 PXI Analog Output Module, PXI Analog Output Module, Analog Output Module, Output Module

References

• User Manual