Reference
This manual corresponds to reference: CHB-B
Packing List
The following items are included:
- Converter (1 unit) - Includes: [Seven-pin connector with bayonet fastener], [Six-pin connector with clip fastener]
- Manual (1 unit) - Ref. 0032656
Features
The CHB Converter is designed to save space when working without a JBC tool stand. It allows the tool to be connected to JBC control units DI, DDE, DME, or HDE.
Note: The hibernation and sleep functions are not available when working without a JBC tool stand.
Connections
Step 1: Connect to Control Unit
Insert the converter's seven-pin connector side (the narrower end with the bayonet fastener) into the PORT connection socket on the back of the control unit (1).
[Diagram Description: Image shows the back of a JBC DI control unit with a port labeled 'PORT'. An arrow indicates inserting the seven-pin connector of the CHB converter into this port.]
Step 2: Secure the Connector
To fix the connector in place, turn the bayonet fastener to the right (2) until the connector is firmly seated.
[Diagram Description: Close-up image of the bayonet fastener on the seven-pin connector. An arrow indicates turning it clockwise.]
Step 3: Connect the Tool
Plug the tool connector into the six-pin connector side of the converter (3).
[Diagram Description: Image shows the six-pin connector side of the CHB converter. An arrow indicates plugging a tool's connector into it.]
Specifications
CHB Converter
Reference: CHB-B
- Total Net Weight: 28 g / 0.062 lb
- Package Dimensions/Weight (L x H x W): 82 x 40 x 35 mm / 38 g (3.23 x 1.57 x 1.38 in / 0.084 lb)
- Complies with CE standards
- ESD safe
Warranty
JBC provides a 2-year warranty covering this equipment against all manufacturing defects, including the replacement of defective parts and labour. The warranty does not cover product wear or misuse. For the warranty to be valid, the equipment must be returned, postage paid, to the dealer where it was purchased.
Environmental Disposal
[Do not dispose of in garbage symbol] This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
