EX9043D MODBUS IO Kuwedzera Module
“
Zvinodiwa neChigadzirwa:
- Muenzaniso: RT-EX-9043D
- Shanduro: 2.03
- Digital Outputs: 15
- Kukurukurirana Protocol: MODBUS
- Transmission Line Standard: EIA RS-485
Mirayiridzo Yekushandisa Chigadzirwa:
Wire Connections:
Tarisa kune tafura yepini yekugovera kune chaiyo wiring kune yekunze
midziyo kana masensa.
Zvirongwa Zvakasarudzika:
- Mutengo weBaud: 9600
- Data Bits: 8
- Parity: Hapana
- Stop Bit: 1
- Kero yemudziyo: 1
Zviratidzo zve LED:
Iyo EX9043D ine sisitimu ye LED yemamiriro emagetsi uye ma LED kune yega yega
kuburitsa nyika.
| Zita | System | Outputs |
|---|---|---|
| Tsanangudzo | Power on | Kubuda kwakakwirira* |
| Tsanangudzo | Kudzima | Kubuda kuri KUDZIKA* |
INIT Operation (Configuration mode):
Iyo module ine EEPROM yekuchengetedza ruzivo rwekugadzirisa. To
shandura kana kugadzirisa zvakare kugadzirisa, shandisa INIT mode.
Mibvunzo Inowanzo bvunzwa (FAQ):
Q: Mangani madhijitari anobuda anotsigira RT-EX-9043D?
A: Iyo RT-EX-9043D inotsigira gumi neshanu zvigadzirwa zvedhijitari.
Mubvunzo: Ndeipi nzira yekutaurirana protocol inoshandiswa neRT-EX-9043D?
A: Iyo RT-EX-9043D inoshandisa iyo MODBUS kutaurirana protocol.
Q: Ndingaita sei itangezve configuration pamusoro RT-EX-9043D?
A: Unogona kuseta zvakare kugadzirisa nekushandisa INIT modhi se
zvinotsanangurwa mubhuku rekushandisa.
"`
Technical Manual yeRT-EX-9043D
Shanduro 2.03
15 x Digital Output
Technical Manual, RT-EX-9043D, v2.03
Nhanganyaya
Iyo EX9043D MODBUS I/O Yekuwedzera module ndeye yepamusoro-yemhando yepamusoro uye yakaderera-yekuwedzera-pane data yekutora mudziyo inobvumira kuwedzera iyo pa-bhodhi yedhijitari yekubuda kwehunyanzvi paX32-based RTCU mayunitsi angangove nekusingaperi uye akajeka akazara uchishandisa MODBUS yekutaurirana protocol.
Iyo EX9043D inoshandisa EIA RS-485 - iyo indasitiri inonyanya kushandiswa bi-directional, yakaenzana yekufambisa mitsara chiyero. Iyo inoita kuti module itumire uye igamuchire data pamitengo yakakwira data pamakiromita marefu.
Iyo EX9043D inogona kushandiswa kuwedzera iyo RTCU nekuwedzera gumi neshanu madhijitari.
Iyo EX9043D inoshanda munzvimbo dzakasiyana siyana uye maapplication, kusanganisira:
1. Factory automation and control 2. SCADA applications 3. HVAC applications 4. Remote kuyera, kutarisa uye kutonga 5. Chengetedzo uye aramu masisitimu, nezvimwe.
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 2 ye8
Technical Manual, RT-EX-9043D, v2.03
Zviri Mukati
Nhanganyaya………………………………………………………………………………………………………………………………………….2 Zviri Mukati……………………………………………………………………………………………………………… view………………………………………………………………………………………………………………………………………...3 Pin Assignment
Default Settings ………………………………………………………………………………………………………………………..5 LED Indicator ………………………………………………………………………………………………………………………………. mode) ………………………………………………………………………………………………….5 Wire Connections ………………………………………………………………………………………………………………………………………… ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………..6 IDE……………………………………………………..7
Graphical view
Pini Basa
Iyo 2 x 10-pini plug-terminals sezvinoonekwa mumufananidzo unotevera inobvumira kubatanidza kugovera, mitsetse yekukurukurirana uye kubuda kwedhijitari. Tafura inotevera inoratidza mazita epini nebasa rawo.
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 3 ye8
Technical Manual, RT-EX-9043D, v2.03
Pin Name
1
DO10
2
DO11
3
DO12
4
DO13
5
DO14
6
INIT*
7
(Y) DATA+
8
(G) DATA-
9
(R) +VS
10 (B) GND
11 DO0
12 DO1
13 DO2
14 DO3
15 DO4
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Tsanangudzo
Digital yakabuda 10 Digital yakabuda 11 Digital yakabuda 12 Digital inobuda 13 Digital yakabuda 14 Pini yekutanga kwekugadzirisa maitiro RS485+ data chiratidzo RS485- data chiratidzo (+) Supply. Ndokumbira utarise kune zvakatemwa zvevoltage nhanho Yekutengesa pasi Digital inobuda 0 Digital inobuda 1 Digital inobuda 2 Digital inobuda 3 Digital kubuda 4
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 4 ye8
Technical Manual, RT-EX-9043D, v2.03
Pin Name
Tsanangudzo
16 DO5
Dhijitari kuburitsa 5
17 DO6
Dhijitari kuburitsa 6
18 DO7
Dhijitari kuburitsa 7
19 DO8
Dhijitari kuburitsa 8
20 DO9
Dhijitari kuburitsa 9
Ndokumbira utarise kuchikamu che "Wire Connections" kune chaiyo wiring kune yekunze mudziyo / sensor.
Default Settings
Zita Baud rate Data bits Parity Stop bit Device kero
Tsanangudzo 9600 8 Hapana 1 1
Aya marongero anogona kushandurwa zviri nyore muRTCU IDE. Ndokumbira utarise ku "Appendix A Uchishandisa module seI/O yekuwedzera muRTCU IDE" kuti uwane ruzivo.
Chiratidzo che LED
Iyo EX9043D inopihwa sisitimu ye LED kuratidza chimiro chesimba, uye maLED kuratidza mamiriro ezvaabuda. Mune inotevera tafura tsananguro yenzvimbo dzakasiyana dzema LEDs inogona kuwanikwa:
Zita System
Outputs
Pattern ON OFF ON OFF
Tsanangudzo Simba paSimba reKudzima Kubuda kwakakwira* Kubuda kwakaderera*
*Ndokumbira utarise kune iyo wiring scheme yechiratidzo chaicho
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 5 ye8
Technical Manual, RT-EX-9043D, v2.03
INIT Operation (Configuration mode)
Iyo module ine yekuvaka-muEEPROM kuchengetedza ruzivo rwekugadzirisa senge kero, mhando, baud rate uye rumwe ruzivo. Dzimwe nguva mushandisi anogona kukanganwa kumisikidzwa kweiyo module, kana kungoda kuichinja. Naizvozvo, iyo module ine yakakosha modhi inonzi "INIT modhi" kubvumira sisitimu kuti ichinje gadziriro.
Pakutanga, iyo INIT modhi yakawanikwa nekubatanidza iyo INIT* pini terminal kune GND terminal. Iwo mamodule matsva ane INIT * switch iri kuseri kwemodule kubvumira kupinda nyore kune INIT * modhi. Kune aya mamodule, INIT * modhi inowanikwa nekutsvedza iyo INIT * chinja kune Init chinzvimbo sezvakaratidzwa pazasi:
Kugonesa INIT modhi, ndapota tevera matanho aya:
6. Simbisa module. 7. Batanidza pini yeINIT* (pini 6) papini yeGND (kana kuti isa INIT* chinja kune INIT* ON
chinzvimbo). 8. Simba pane module.
Iyo module ikozvino yagadzirira kugadzirwa. Kana iyo module inogadziriswa, bvisa simba uye bvisa kubatana pakati peINIT * pini (pini 6) uye GND pini (kana slide INIT * chinja kune Normal chinzvimbo), uye wozoisazve simba kune module.
Paunenge uchishandisa RTCU IDE kuti uchinje marongero, sarudza "setup module" kubva kurudyi-kurudyi menyu yenode mu "I / O Extension" muti, uye gwara richapfuura nepakati nhanho imwe neimwe yekugadzirisa. Ndokumbira utarise kune RTCU IDE pa-line rubatsiro kuti uwane rumwe ruzivo.
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 6 ye8
Technical Manual, RT-EX-9043D, v2.03
Wire Connections
Digital Outputs:
Kana uchibatanidza mudziyo kune zvinobuda zvedhijitari ndapota tevera iyo wiring scheme pazasi:
DO14
Ndokumbira utarise kuti kana uchibatanidza inductive mutoro kune zvinobuda zvedhijitari diode inodiwa kudzivirira counter EMF.
Zvinotaurwa Nezvehunyanzvi
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 7 ye8
Technical Manual, RT-EX-9043D, v2.03
Appendix A Kushandisa module seI/O yekuwedzera muRTCU IDE
Kuti ukwanise kushandisa MODBUS I / O Kuwedzera module sekuwedzera kweI / O, chirongwa cheRTCU IDE chinoda kugadziridzwa nemazvo, nekupinda maparameter akakodzera emodule yekuwedzera mu "I / O Extension device" dialog1.
Nhamba inotevera inoratidza kurongeka chaiko kweEX9043 yakabatana neRS485_1 chiteshi paRTCU DX4 ine default marongero:
Default value
Kubva paRTCU
Default values
Zvinofanira kuenderana netsika idzi
Kuti uchinje maitiro ataurwa pamusoro apa, hutsva hutsva hunofanirwa kuiswa uye kuendeswa kune module2.
Values mu "I / O Extension net" inofanira kuiswa maererano nekutaurirana pakati pemodule neRTCU unit, nhamba yechiteshi inotevedzera mitemo ye serOpen function, iyo inotsanangurwa muIDE online rubatsiro. Pakuchinja baud, data bit(s), parity kana stop bit(s) all units pa mambure zvinofanirwa kugadziriswa3.
Nzvimbo yekero ndeye default "1"; kana mamwe ma module akabatana kune imwecheteyo mambure ega ega anofanirwa kuve nekero yakasarudzika. Kuchinja kero yemodule kunoitwa, nekusarudza kukosha kutsva uye wozogadzirisazve module.
Kunyatso tarisisa kunofanirwa kubhadharwa kune iyo Count, Index muDigital Outputs chikamu, iyo inofanirwa kunge iri 15 uye 0 zvakateerana, zvikasadaro kutaurirana nemodule kukundikana. Optional zvinyorwa zvese zvinogona kupindurwa nekusarudza "Negate".
1 Ndokumbira utarise kuRTCU IDE online rubatsiro rwekugadzira nekugadzirisa I/O yekuwedzera 2 Ndokumbira utarise "Project Control - I/O Extension" muIDE online rubatsiro. 3 Kuti ugadzirise zvakare: kurudyi tinya mudziyo muIDE uye sarudza "setup module", uye wotevera gwara.
Logic IO ApS. Holmboes Allé 14 8700 Horsens Denmark
Ph: (+45) 7625 0210 Fax: (+45) 7625 0211 Email: info@logico.com Web: www.logico.com
Peji 8 ye8
Zvinyorwa / Zvishandiso
 |
logic io EX9043D MODBUS IO Kuwedzera Module [pdf] Bhuku reMirayiridzo RT-EX-9043D, EX9043D MODBUS IO Kuwedzera Module, MODBUS IO Kuwedzera Module, Kuwedzera Module, Module |