PRODIGY® 2.0
INSTALLATION Mraidzo

Firmware Update

1.1. Unit Controller USB Flash Drive Kugadziridza Kugona

Firmware updating inowanikwa uchishandisa USB port. Kuti uratidze yazvino firmware vhezheni, enda kumenyu DATA > FACTORY > SOFTWARE VERSION.

1.2. Kuvandudza Firmware
Iyo firmware paM3 unit controller inogona kuvandudzwa nekuisa USB flash drive ine update.
CHERECHEDZA - Flash drive midhiya inofanirwa kuumbwa uchishandisa iyo FAT32 file system.

1.3. FileInodiwa Pakuvandudzwa
Files inodiwa kusimudzira M3 unit controller kubva paUSB flash drive: M3XXXXXXXX.P2F/.P6F (ZVESE ZVAKAITIKA ZVINORUDZIRWA, ASI HAZVIZVINOZVINOMIRIRA)
Lennox inokurudzira kudhaunirodha nekuchengetedza zvese .P2F ne.P6F files yeshanduro yazvino pa USB flash drive. Iyo M3 ichasarudza yakakodzera file. ITA
KWETE shandura iyo file kuwedzera pa .P2F file ku .P6F kana kuti zvimwewo. Iyo XXXX XXXX inobata nzvimbo kune makuru uye madiki shanduro uye kuvaka nhamba ruzivo mune chaiyo file zita, uye inosiyana kubva kune imwe shanduro kuenda kune inotevera.

1.4. Kwekuisa .P2F/.P6F File on iyo USB Flash Drive.

1. Iyo firmware folda iri mumudzi wedhairekitori ye USB flash drive. (Cherechedza: Tsamba yekutyaira inogona kusiyana neiri inoratidzwa pazasi.
   
2. Iyo M3 folda iri pasi peFirmware folda.
   
3. Isa kopi ye.P2F/.P6F file muM3 folda.
   

1.5. Kuvandudza Firmware

1. Mushure mekuisa USB flash drive, enda kuSERVICE> SOFTWARE UPDATE.
2. Dzvanya iyo SELECT bhatani, wobva washandisa gadziriso tsika (kumusoro/pasi) miseve kusarudza firmware vhezheni.
3. Dhinda SAVE.
4. Iyo inotevera yekuteedzera inoteedzana inofanirwa kuitika:
   SOFTWARE UPDATE KUTANGA
   SOFTWARE UPDATE ERASING FLASH
   SOFTWARE UPDATE PROGRAMMING FLASH
   SOFTWARE UPDATE PROGRAMMING FLASH PROGRESS xx% (xx% inoratidza kuwedzera muzanatagndapedza)
   SOFTWARE UPDATE RESETTING CONTROLLER.
5. Mushure mekunge chidzori cheyuniti chagadzirisa, sikirini yekutanga kuoneka icharatidza zvinotevera (xx.xx.XXXX inoratidza nhamba yesoftware):
   PRODIGY 2.0
   M3 MUTUNGAMIRI
   xx.xx.xxxx
6. Iwe unogona kubvisa USB flash drive chero nguva mushure mekugadzirisazve kwapera.
7. Iyo firmware version inogona zvakare kusimbiswa nekufamba kuenda kumenyu DATA> FACTORY> SOFTWARE VERSION.

CHERECHEDZA: Firmware zvigadziriso hazvichinje iyo unit controller kumisikidza marongero. Zvese zvigadziriso zvichachengetwa mushure mekunge firmware yagadziridzwa.

Kuchengetedza uye Kurodha Mushandisi Profile

Paunenge uchichengetedza mushandisi profile, ruzivo rwese zvine chekuita nenhamba yemodhi, kumisikidzwa ID1 / ID2, paramita yakagadziridzwa uchishandisa iyo EDIT PARAMETER sarudzo, uye Test & Balance ruzivo zvese zvakachengetwa kunzvimbo isingaite mundangariro.
Iwo mareferensi mabasa anowanikwa kubva kuM3 unit controller mushandisi interface:

1. KUSEVISA mushandisi profile, enda ku SERVICE > REPORT > SEVISA USER PROFILE = YES
2. KUTAURA mushandisi profile, enda ku SERVICE > REPORT > LOAD USER PROFILE = YES

Kuchengetedza uye Kurodha USB Profile

Iyo USB Profile utility inobvumira kopi yeprofile kuti uchengetedzwe kune USB yekuchengetedza mudziyo. Chete EDIT PARAMETER yakachinja marongero uye Test & Balance ruzivo runochengetwa. Iyo yekuisa inozoda kugadzirisa iyo Model Nhamba, uye Configurations ID 1 / ID2 kutanga isati yarodha yakachengetwa USB pro.file. Iyo USB Profile inowanzo shandiswa pakutsiva M3 unit controller neitsva. Iwo mareferensi mabasa anowanikwa kubva kuM3 unit controller mushandisi interface:

1. Kuchengeta USB Profile, enda ku SERVICE > REPORT > USB PROFILE SEVISA > isa zita rakasarudzika reiyo profile wobva wadzvanya SAVE.
2. Kurodha USB Profile, enda ku SERVICE > REPORT > USB PROFILE LOAD > shandisa gadziriso uye chengetedza kukosha miseve kusarudza simbisa yaunoda profile wobva wadzvanya SAVE.

©2022 Litho USA
507415-01
5/2022
Inokwidziridzwa 2/2016

Zvinyorwa / Zvishandiso

LENNOX M3 Prodigy 2.0 Modbus Unit Controller [pdf] Bhuku reMirayiridzo M3, Prodigy 2.0 Modbus Unit Controller, Modbus Unit Controller, Unit Controller, M3, Controller

References

• User Manual