PRODIGY® 2.0
Ntuziaka ntinye

Mmelite firmware

1.1. Ikike mmelite USB Flash Drive Onye njikwa otu

Imelite firmware dị site na iji ọdụ ụgbọ mmiri USB. Iji gosipụta ụdị firmware dị ugbu a, gaa na menu DATA> FACTORY> VERSION SOFTWARE.

1.2. Na-emelite ngwa ngwa
Enwere ike imelite firmware dị na njikwa unit M3 site na ịtinye draịvụ USB nwere mmelite ahụ.
IHE – Flash mbanye ga-emerịrị site na iji FAT32 file usoro.

1.3. Files Achọrọ maka mmelite
Files mkpa iji kwalite M3 unit njikwa site na USB flash mbanye: M3XXXXXXXX.P2F/.P6F (AKWỤKWỌ EGO niile, ma ọ bụghị iwu)
Lennox kwadoro nbudata na ịchekwa ma .P2F na .P6F files maka ụdị kachasị ọhụrụ na draịvụ USB. M3 ga-ahọrọ nke kwesịrị ekwesị file. Mee
Ọ BỤGHỊ gbanwee file ndọtị na .P2F file ka .P6F ma ọ bụ vice versa. XXXX XXXX bụ ndị na-edobe maka ụdị isi na obere ma wuo ozi ọnụọgụ n'ezie file aha, ma dị iche iche site n'otu ụdị gaa na nke ọzọ.

1.4. Ebe a ga-edebe .P2F/.P6F File on USB flash mbanye.

1. Ebe nchekwa firmware dị na ndekọ mgbọrọgwụ nke draịvụ USB. (Rịba ama: Akwụkwọ ozi mbanye nwere ike ịdị iche na nke e gosipụtara n'okpuru.
   
2. Ebe nchekwa M3 dị n'okpuru nchekwa Firmware.
   
3. Debe otu .P2F/.P6F file banye na folda M3.
   

1.5. Na-emelite ngwa ngwa

1. Mgbe itinyechara draịvụ USB, gaa na SERVICE> Nwelite ngwanrọ.
2. Pịa bọtịnụ SELECT, wee jiri akụ mgbanwe mgbanwe (elu/ala) ka ịhọrọ ụdị femụwe.
3. Pịa SAVE.
4. Usoro mmelite ndị a kwesịrị ime:
   Nwelite ngwanrọ na-amalite
   Nwelite ngwanrọ na-ehichapụ FLASH
   FLASH na-emelite ngwanrọ software
   Nwelite ngwa ngwa mmemme FLASH xx% (xx% na-egosi ọnụọgụ mmelite.tage mechara)
   Nwelite ngwanrọ nrụpụta ihe njikwa.
5. Mgbe njikwa otu ahụ tọgharịa, ihuenyo mbụ ga-apụta ga-egosipụta ihe ndị a (xx.xx.XXXX na-egosi nọmba ụdị ngwanro):
   IHE OMUME 2.0
   M3 njikwa
   xx.xx.xxxx
6. Ị nwere ike wepu draịvụ USB n'oge ọ bụla ka emechara nrụgharị ahụ.
7. Enwere ike ịchọpụta ụdị firmware ahụ site na ịgagharị na menu DATA> FACTORY> VERSION SOFTWARE.

IHE: Mmelite ngwa ngwa anaghị agbanwe ntọala nhazi njikwa otu. A ga-edobe ntọala niile ka emelitere ngwa ngwa.

Ịchekwa ma na-ebunye onye ọrụ Profile

Mgbe ị na-echekwa onye ọrụ profile, ozi niile gbasara nọmba nlereanya, nhazi ID1/ID2, paramita emeziri site na iji nhọrọ EDIT PARAAMETER, yana ozi Nleba & Nleba na-echekwa ya na ebe anaghị agbanwe agbanwe na ebe nchekwa.
Ọrụ nrụtụ aka dị site na interface njirimara onye njikwa unit M3:

1. Iji chekwaa onye ọrụ profile, gaa na SERVICE> Akụkọ> Zọpụta USER PROFILE = EE
2. Iji Ibu Ibu onye ọrụ profile, gaa na SERVICE> REPORT> LOAD USER PROFILE = EE

Na-echekwa ma na-ebunye USB Profile

USB Profile Utility na-enye ohere ka nnomi nke profile ka echekwara na ngwaọrụ nchekwa USB. Naanị EDIT PARAMETER gbanwere ntọala yana ozi Ule & Balance ka echekwara. Onye nrụnye ga-achọ ịhazi Nọmba Model, yana Nhazi Nhazi 1 / ID2 tupu ibunye pro USB echekwara.file. USB Profile a na-ejikarị eme ihe mgbe ọ na-eji nke ọhụrụ dochie M3 unit controller. Ọrụ nrụtụ aka dị site na interface njirimara onye njikwa unit M3:

1. Ka ịchekwaa USB Profile, gaa na SERVICE> Akụkọ> USB PROFILE Chekwa > tinye aha pụrụ iche maka profile wee pịa Chekwa.
2. Iji wụnye USB Profile, gaa na SERVICE> Akụkọ> USB PROFILE LOAD > jiri gbanwee wee chekwaa akụ ụkpụrụ ka ịhọrọ akara pro chọrọfile wee pịa Chekwa.

©2022 Litho USA
507415-01
5/2022
Obere 2/2016

Akwụkwọ / akụrụngwa

LENNOX M3 Prodigy 2.0 Modbus Unit Controller [pdf] Akwụkwọ ntuziaka M3, Prodigy 2.0 Modbus Unit Controller, Modbus Unit Controller, Unit Controller, M3, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ