PRODIGY® 2.0
KENYA TAELO

Firmware Update

1.1. Unit Controller USB Flash Drive Apdate bokhoni

Ntlafatso ea firmware e fumaneha ho sebelisa boema-kepe ba USB. Ho hlahisa mofuta oa hajoale oa firmware, ea ho menu DATA > FACTORY > SOFTWARE VERSION.

1.2. Ho ntlafatsa Firmware
Firmware ho M3 unit controller e ka ntlafatsoa ka ho kenya USB flash drive e nang le ntlafatso.
HLOKOMELA - Mecha ea litaba ea Flash drive e tlameha ho hlophisoa ho sebelisoa FAT32 file tsamaiso.

1.3. Files E Hlokahala bakeng sa Ntlafatso
Files e hlokahalang ho ntlafatsa M3 unit controller ho tloha ho USB flash drive: M3XXXXXXXX.P2F/.P6F (SE TLHOKOMELISO TSOHLE, EMPA HA E TLAMETSOE)
Lennox e khothaletsa ho khoasolla le ho boloka ka bobeli .P2F le .P6F files bakeng sa mofuta oa morao-rao ho USB flash drive. M3 e tla khetha e loketseng file. ETSA
HA HO fetola ea file katoloso ho .P2F file ho isa ho .P6F kapa ka tsela e fapaneng. XXXX XXXX ke litšoantšiso tsa liphetolelo tse kholo le tse nyane 'me li theha lintlha tsa linomoro ka nepo file lebitso, 'me e fapana ho ea ka mofuta o mong ho ea ho o mong.

1.4. Moo u ka Behang .P2F/.P6F File on sesebelisoa sa USB Flash Drive.

1. Foldara ea firmware e fumaneha bukeng ea motso ea USB flash drive. (Tlhokomeliso: Lengolo la Drive le ka ’na la fapana le le bontšitsoeng ka tlaase mona.
   
2. Foldara ea M3 e fumaneha tlasa foldara ea Firmware.
   
3. Beha kopi ea .P2F/.P6F file ho foldareng ea M3.
   

1.5. Ho ntlafatsa Firmware

1. Ka mor'a ho kenya USB flash drive, e-ea ho SERVICE> SOFTWARE UPDATE.
2. Tobetsa konopo ea KHETHA, ebe u sebelisa metsu ea ho lokisa (holimo/tlase) ho khetha mofuta oa firmware.
3. Tlanya SAVE.
4. Tatelano e latelang ea ntlafatso e tlameha ho etsahala:
   SOFTWARE HLAHALA QALANG
   SOFTWARE PHAHAMA ERASING FLASH
   SOFTWARE HLAHALA LETSATSI LA THUTO
   Ntlafatso ea SOFTWARE E FETILENG FELETSE xx% (xx% e bonts'a liperesente tsa ntlafatsotage qetile)
   SOFTWARE UPDATE RESETTING MOLAOLI.
5. Ka mor'a hore yuniti e ntlafatse, skrine ea pele e tla hlaha e tla hlahisa tse latelang (xx.xx.XXXX e bontša nomoro ea software):
   PRODIGY 2.0
   M3 MOLAOLI
   xx.xx.xxxx
6. U ka tlosa USB Flash drive neng kapa neng ka mor'a hore ho seta bocha ho phetheloe.
7. Mofuta oa firmware o ka boela oa netefatsoa ka ho ea ho menu DATA> FACTORY> SOFTWARE VERSION.

HLOKOMELA: Lintlafatso tsa firmware ha li fetole litlhophiso tsa tlhophiso ea taolo ea yuniti. Litlhophiso tsohle li tla bolokoa kamora hore firmware e ntlafatsoe.

Ho boloka le ho Loading User Profile

Ha u boloka mosebelisi profile, tlhaiso-leseling eohle e mabapi le nomoro ea mohlala, ID1 / ID2 ea tlhophiso, li-parameter tse fetotsoeng ho sebelisoa khetho ea EDIT PARAMETER, le tlhaiso-leseling ea Test & Balance kaofela li bolokiloe sebakeng se sa tsitsang mohopolong.
Mesebetsi ea litšupiso e fumaneha ho tsoa ho M3 unit controller interface:

1. HO BOLOKA mosebelisi profile, e-ea ho TŠEBELETSO > REPORT > BOLOKA USER PROFILE = EE
2. HO TLANYA mosebelisi profile, e-ea ho TŠEBELETSO > REPORT > LOAD USER PROFILE = EE

Ho boloka le ho kenya USB Profile

Sesebelisoa sa USB Profile utility lumella kopi ea profile ho bolokoa ho sesebelisoa sa polokelo ea USB. Ke EDIT PARAMETER feela e fetotseng litlhophiso 'me ho bolokoa lintlha tsa Test & Balance. Sesebelisoa se tla hloka ho hlophisa Nomoro ea Mohlala, le Configurations ID 1 / ID2 pele pele o kenya USB pro e bolokiloeng.file. Sesebelisoa sa USB Profile hangata e sebelisoa ha ho nkela taolo ea yuniti ea M3 sebaka ka e ncha. Mesebetsi ea litšupiso e fumaneha ho tsoa ho M3 unit controller interface:

1. Ho BOLOKA USB Profile, ea ho SERVICE > REPORT > USB PROFILE BOLOKA > kenya lebitso le ikhethileng bakeng sa setsebifile ebe o tobetsa BOLOKA.
2. Ho kenya USB Profile, ea ho SERVICE > REPORT > USB PROFILE LOAD > sebelisa ho lokisa le ho boloka metsu ea boleng ho khetha ho totobatsa pro eo u e batlangfile ebe o tobetsa BOLOKA.

©2022 Litho USA
507415-01
5/2022
E tlatsitsoe ka la 2/2016

Litokomane / Lisebelisoa

LENNOX M3 Prodigy 2.0 Modbus Unit Controller [pdf] Buka ea Taelo M3, Prodigy 2.0 Modbus Unit Controller, Modbus Unit Controller, Unit Controller, M3, Controller

Litšupiso

• Bukana ea Mosebelisi