iCT H6732A-R Multi Function ToolBox

Nhanganyaya

Overview

• MTB(Multi-function ToolBox) mhinduro yakakwana yeICT chigadzirwa kugadzirisa. Iyo inotakurika programmer- MTB, inopa data mune yakakura LCM ichiita kugadzirisa kwechigadzirwa nyore uye nekukurumidza. MTB yakanyanya nyore iyo inogona kuchengetedza akati wandei firmware panguva imwe chete.
• Ane simba akawanda-mafunctions anosanganisira programmer, shanduko mashandiro, lrDA kurodha uye sensor calibration.
• Iyo yese-mu-imwe dhizaini inosangana nezvinodiwa zvese zvinoumba musika.

Feature

• Multifunction: Firmware kurodha, Coin Changer inoshanda kuseta uye sensor calibration.
• Tsigira Coin Changer mashandiro ekugadzirisa, yakavakirwa-mukati 9 sarudzo dzekushanda parameter, inoshanda yekuvandudza basa uye kuverenga data rekuongorora
• High nyore: kuchengetedza firmware yakawanda panguva imwe chete.
• Yakavakirwa-mukati ndangariro uye Micro-SD Kadhi slot yekuchengetedza yakakura data.
• Imwe yakawanda-chinangwa tambo yezvakasiyana zvigadzirwa zveICT.
• Bhatiri rinochajwa uye dhizaini inochengetedza simba.
• Sikirini yakakura kuratidza ruzivo.
• Hushamwari mushandisi interface.
• Zviri nyore kutakura.

Tsanangudzo

Kushandisa Simba

• Mira ne 3.7V, 350 mA, 1.30W
• Operation 3.7V, 370 mA, 1.40W
• Maximum 3.7V, 2 A, 7.40W

Nzvimbo yekushanda

• Operation Temperature - 5 ~ 50 ° C
• Storage Temperature  - 20 ~ 70 ° C
• Humidity 85% (hapana condensation)
• Battery in charge Tembiricha 0~45°C
• Weight Approx. 288.5g

Dimension

Zvikamu

Reverse side

Installation

Harnesses Application

Sei kuchaja bhatiri

Battery Capacity

• Li-ion bhatiri: 2100 mAh

Kana bhatiri radzikira, Status LED inoratidza blink tsvuku pamwe neLCM inoratidza bhatiri rakaderera. Ndokumbira ubhadharise MTB nekukasira.

Charge LED chiratidzo

Charge LED chiratidzo	Tsanangudzo
Tsvuku	Kuchaja kuri kuita
Inotendeuka kuti idzime	Zvakakwana

Kuchaja nzira

1. Inobhadharwa nePC
   • Shandisa WEL-RHP57 kubatanidza MTB nePC.
2. Inobhadharwa neAdapter
   • Inogona kubhadhariswa neadapter yekunze zvakare. Madiro eadapter anofanirwa kunge ari DC 5V, 500mA kana pamusoro.

Battery Notice

• Bhatiri reMTB rinofanirwa kuchajwa kamwechete pamwedzi mitanhatu yega yega kuitira kuti bhatiri riwedzere hupenyu.
• Kushanda tembiricha uku bhatiri richichaja: 0-450C
• Usashandise MTB bhatiri richichaja 5V DC richichaja voltage.
• Inoenderera mberi nguva yekushanda: kusvika kumaawa matanhatu Kuchaja nguva: 4 maawa (kugona

Kutanga (SWI OFF)

• Danho rechitatu. Dzvanya bhatani re ON/ OFF kuti umutse MTB uye ipapo Status LED inobatidza.
• Danho rechitatu. Press”” “ ” kuchinja mapeji eMain menu.

danho 3. Sarudza basa rimwe chete raunoda. Ndokumbira utarise Zvitsauko 3-7 kuti uwane rumwe ruzivo rwebasa
Changer Inoshanda: Rongedza Coin Changer oparesheni zvirimo

• Dhaunirodha FW: Dhawunirodha ICT zvigadzirwa 'firmware pamwe neIrDADownload.
• BA Calibration: Calibration zvishandiso 'sensor.
• Kurara wega: Seta MTB yenguva yenguva yekushandura nzira yekurara.(5 kana maminitsi gumi)
• Bhatiri & RTC: Tarisa yasara bhatiri huwandu pamwe nekuseta RTC (zuva & nguva)
• Delete File: Yakadzimwa purogiramu files, SD Card
• Mutauro: Sarudza Mutauro Wenyika.
• Device Info: Verenga muchina chirongwa shanduro

Device Setting Passive mode.

Coin Changer operation setting

Connection

• danho 1. Shandisa WEL-RSBII kubatanidza MTB uye Coin Changer.
• Danho rechitatu. Dzvanya "Changer shanda" pane peji reMain menu.

Parameter muCoin chenji Sarudza Parameter

• File shanduko: Iyo parameter inoisa Changer.
• Changer =>File: Iyo parameter yakachengeta Changer.

Verenga coin changer's audit data(EVA DTS)

• Danho 1
  • Sarudza "Verenga Audit Data".
• danho 2.
  • Sarudza kutumira.
• Danho rechitatu.
  • Sarudza kuverenga-chete kana kuverenga Zvakajeka.

Dhawunirodha firmware yeICT zvigadzirwa

Connection
Shandisa WEL-RSBII kubatanidza MTB neICT zvigadzirwa (BAICA nezvimwewo ..)

Shandisa WEL-RHP57 kubatanidza MTB neXBA.
Ndokumbira utarise kune 6-3 Matanho ekurodha XBA.

Instruction

• Danho rechitatu. Dzvanya "Download FW" pamapeji eMain menu.
• danho 2. Sarudza imwe Model Name kuti utange kurodha.

Matanho ekurodha XBA uye DIP inochinja marongero

• Danho I
  • Shandisa WEL-RHP57 kubatanidza MTB neXBA. Dzvanya "Download FW" pamapeji eMain menu.
• danho 2.
  • Sarudza "BA" uye wobva wadzvanya "XBA".
• danho 3.
  • Dzvanya "Enter" kuti utange kudhaunirodha. Dzvanya "Back" kudzosera peji rekutanga.
• Danho rechitatu.
  • Dzvanya "Kunze Dips" kumisikidza XBA kunze dips.
  • Dzvanya "Inside Dips" kumisikidza XBA mukati medips. Kana pasina chikonzero chekumisikidza XBA dip switch, ndapota tinya "Enter" kurodha firmware zvakananga.
• danho 5.
  • Mushure mekupinda "Outside Dips" kana "Inside Dips", ndapota dzvanya chero madhipisi aunoda kudzokorora. (VAKA kana KUDZIMA)
  • Dzvanya "V" kuti uise NO.5-NO.8 dips
  • Dzvanya "Back" kudzosera peji rekutanga.
• Danho rechitatu.
  • Dzvanya "Enter" kuti utange kudhawunirodha.
• danho 7.
  • Dzvanya "YES" kuchengetedza dip setting muXBA.
  • Dzvanya "NO" kwete kuchengetedza dip kuseta muXBA.
• Danho rechitatu.
  • Dhawunirodha zvakabudirira uye tinya "Simbisa" dzokera kune yekutanga peji.

Dhaunirodha yakundikana inoratidzwa sepazasi:

Sensor Calibration

Connection Shandisa WEL-RSBII kubatanidza MTB uye ICT zvigadzirwa (BA/CA nezvimwewo ..)

Shandisa WEL-RHP57 kubatanidza MTB neXBA.

Instruction

• Danho rechitatu. Dzvanya "BA Calibration" pamapeji eMain menu.
• danho 2. MTB inoona zita remodeli yemudziyo uye ruzivo rwe firmware.

MTB haina kukwanisa kutsigira sensor calibration yezvimwe zvigadzirwa zvinogona kuratidza sezviri pazasi:

• Danho rechitatu. Ndapota isa calibration card mumudziyo. Sensor calibration yakabudirira pamwe nekugadzirisa zvakare mudziyo otomatiki. Sensor calibration yakundikana.
• Nhanho4. Dzvanya "Confirm" kudzosera peji rekutanga.

Battery Capacity

Battery Capacity & RTC (Battery & RTC)

• Danho rechitatu.
  • Dzvanya "Battery & RTC" pane Main menyu.
• danho 2.
  • Dzvanya "Set" kuseta RTC zuva uye nguva.
• danho 3.
  • Dzvanya "9" kuti uchinje digit yakarongwa. ” + “,” ” kuwedzera/kubvisa nhamba.
  • Dzvanya "Save" kuchengetedza marongero.

Batanidza kuChishandiso chePC chishandiso

• Danho rechitatu. Batidza SWI kune ON chimiro uye tinya "Reset".
• Danho rechitatu. Ndapota isa USB Driver.
• Danho rechitatu. Batanidza mudziyo, MTB uye PC. (Shandisa WEL-RHP57 tambo kubatanidza MTB nePC)
• Danho rechitatu. Vhura chishandiso chemudziyo uye sarudza kuona comport.
• Danho rechitatu. Dhawunirodha firmware yemuchina.
  • Dzvanya "COMI" uye "PROGRAM" kurodha firmware yemuchina.
  • Kana chishandiso chePC chikaratidza kurodha watadza meseji, ndapota tinya "COM2" & "PROGRAM" uye edza zvakare.
• Danho rechitatu. Reset mudziyo
  • Dzvanya "* COMI" uye "RESET". Kana mudziyo ukasagadzirisa, ndapota tinya “COM2” & “RESET” woedza zvakare.
• Danho rechitatu. Dzorera SWI kune OFF mamiriro uye tinya "Reset" kudzosera Main Menu.

Dhawunirodha MTB's firmware nepeni mutyairi

• Danho rechitatu. Ndapota dzima MTB kutanga.
  • Dzvanya "Confirm".
    
• danho 2.
  • Batanidza Pen drive. MTB's firmware mune peni mutyairi.
  • Ramba uchidzvanya bhatani "E", wobva wadzvanya "ON-OFF" bhatani panguva imwe chete.
  • Dzvanya "YES" kuti utore firmware yeMTB.

Kugadzirisa matambudziko

CONTACT

• Iyo kambani International Currency Technologies Corporation
• No.28, Ln. 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei Guta 114, Taiwan
• sales@ictgroup.com.tw. (For Sales)
• fae@ictgroup.com. tw (ZveMutengi Sevhisi)
• Websaiti: www.ictgroup.com.tw.
• 02016 International Currency Technologies Corporation v.2.o
• Chikamu Nhamba: H6732A-R

Kushandiswa Kwezvinhu Zvisingakwanisi

• International Currency Technologies Corporation (ICT) kodzero dzose dzakachengetwa.
• Zvese zvirimo zvinhu zvine kodzero yeICT.
• Zvese zviratidzo, masevhisi mamaki, uye mazita ekutengeserana ndeaya eICT.
• ICT inochengetedza kodzero nguva dzese kuburitsa kana kugadzirisa chero ruzivo se
• ICT inoona zvakakodzera kugutsa chero mutemo unoshanda, mutemo, maitiro emutemo, kana chikumbiro chehurumende, kana kugadzirisa, kuramba kutumira, kana kubvisa chero ruzivo kana zvinhu, zvizere kana chikamu, maererano nesarudzo yeICT.

Zvinyorwa / Zvishandiso

iCT H6732A-R Multi Function ToolBox [pdf] Installation Guide H67320-R, H6732A-R, H6732A-R Multi Function ToolBox, H6732A-R, Multi Function ToolBox, Function ToolBox, Toolbox

References

• User Manual