I-iCT H6732A-R yeSixhobo seSixhobo seMisebenzi emininzi

Intshayelelo

Ngaphezuluview

• I-MTB(Multi-function ToolBox) sisisombululo esipheleleyo sogcino lwemveliso ye-ICT. Umdwelisi wenkqubo ophathwayo-MTB, ubonisa idatha kwi-LCM enkulu eyenza ukugcinwa kwemveliso ngokulula nangokukhawuleza. I-MTB yinto elula kakhulu enokugcina i-firmware eninzi ngexesha elinye.
• Imisebenzi emininzi enamandla ibandakanya umdwelisi weprogram, ukusebenza kokutshintsha, ukukhuphela kwe-lrDA kunye nokulinganisa inzwa.
• Uyilo lwe-in-one luhlangabezana nazo zonke iimfuno zentengiso.

Uphawu

• Imisebenzi emininzi: Ukukhuphela i-Firmware, i-Coin Changer isethingi yokusebenza kunye nokulinganisa inzwa.
• Inkxaso ye-Coin Tjhugulula izicwangciso zokusebenza, ezakhelwe kwi-9 iinketho zepharamitha yokusebenza, umsebenzi wokuhlaziya osebenzayo kunye nokufunda idatha yophicotho
• Uncedo oluphezulu: ukugcinwa kwe-firmware ezininzi ngexesha elinye.
• Imemori eyakhelwe-ngaphakathi kunye ne-Micro-SD Card slot yokugcina idatha enkulu.
• Intambo enye yeenjongo ezininzi kwiimveliso ezahlukeneyo ze-ICT.
• Ibhetri ehlawulwayo kunye noyilo lokonga amandla.
• Isikrini esikhulu ukubonisa ulwazi.
• Ujongano lomsebenzisi olunobuhlobo.
• Kulula ukuthwala.

Inkcazo

Ukutya umbane

• Yima ecaleni kuka 3.7V, 350 mA, 1.30W
• Ukusebenza 3.7V, 370 mA, 1.40W
• Ubuninzi 3.7V, 2 A, 7.40W

Indawo yokusebenza

• Ubushushu bokusebenza -5 ~ 50 ° C
• Ubushushu boGcino  -20 ~ 70 ° C
• Ukufuma 85% (akukho ukujiya)
• Ibhetri ephetheyo Ubushushu 0~45°C
• Ubunzima malunga. 288.5g

Ubungakanani

Amacandelo

Icala elingasemva

Ukuhlohla

Iintambo zokuSebenza

Indlela yokutshaja ibhetri

Umthamo webhetri

• Ibhetri yeLi-ion: 2100 mAh

Xa ibhetri iphantsi, i-Status LED ibonisa ukuqhwanyaza okubomvu kunye ne-LCM ibonisa ibhetri ephantsi. Nceda uhlawule i-MTB ngoko nangoko.

Ukuhlawula isalathisi se-LED

Ukuhlawula isalathisi se-LED	Inkcazo
Bomvu	Ukutshaja kuyaqhubeka
Iyajika iphinde icime	Ihlawuliswe ngokupheleleyo

Inkqubo yokutshaja

1. Ihlawuliswa ngePC
   • Sebenzisa i-WEL-RHP57 ukuqhagamshela i-MTB kunye nePC.
2. Ihlawuliswa ngeAdapter
   • Isenokuhlawuliswa ngeadaptha yangaphandle ngokunjalo. Iinkcukacha zeadaptha kufuneka zibe yi-DC 5V, 500mA okanye ngaphezulu.

Isaziso sebhetri

• Ibhetri ye-MTB kufuneka itshajwe ubuncinane kanye kwiinyanga ezintandathu ukuze kwandiswe ubomi bebhetri.
• Ubushushu bokusebenza ngelixa ibhetri itshaja: 0-450C
• Musa ukusebenzisa i-MTB ngelixa ibhetri itshaja i-5V DC itshaja voltage.
• Iyaqhubeka ixesha lokusebenza: ukuya kwiiyure ezi-6 Ixesha lokutshaja: Iiyure ezi-4 (umthamo

Ukuqalisa (SWI OFF)

• Inyathelo loku-1. Cofa iqhosha le-ON/ OFF ukuvusa i-MTB kwaye emva koko i-Status LED ilayita.
• Inyathelo loku-2. Cofa”” “ ” ukutshintsha amaphepha eMain menu.

Inyathelo lesi-3. Khetha umsebenzi omnye owufunayo. Nceda ujonge kwiZahluko 3-7 ngeenkcukacha ezithe vetshe ngomsebenzi
Inguqu iSebenza: Cwangcisa imixholo yokusebenza yoTshintsho lweCoin

• Khuphela i-FW: Khuphela i-firmware yeemveliso ze-ICT kunye ne-IrDADownload.
• Ulungelelwaniso lweBA: Uluvo lwezixhobo zokulinganisa.
• Ukulala ngokuzenzekela: Seta ixesha lekhefu le-MTB ukuze ujike indlela yokulala.(imizuzu emi-5 okanye eli-10)
• Ibhetri & RTC: Jonga umthamo oseleyo webhetri kunye nokuseta i-RTC (umhla kunye nexesha)
• Cima File: Inkqubo ecinyiweyo files, Ikhadi le-SD
• Ulwimi: Khetha ulwimi lwelizwe.
• Ulwazi ngesixhobo: Funda uguqulelo lwenkqubo yomatshini

Ukuseta isixhobo Imowudi yokuLawula.

Isetingi yokusebenza yoTshintsho lwemali

Uqhagamshelwano

• Inyathelo lesi-1. Sebenzisa i-WEL-RSBII ukuqhagamshela i-MTB kunye ne-Coin Changer.
• Inyathelo loku-2. Cofa u-"Tshintsho sebenza" kwiphepha le-Main menu.

IParameter kwi-Coin changer Khetha iParameter

• File umtshintshi: Iiparamitha ziseta uMtshintshi.
• Umtshintshi =>File: Iiparameters zigcinwe kwiTshintsho.

Funda idatha yophicotho lomtshintshi wengqekembe (EVA DTS)

• Inyathelo loku-1
  • Khetha "Funda iDatha yoPhicotho".
• Inyathelo lesi-2.
  • Khetha ugqithiso.
• Inyathelo loku-3.
  • Khetha ukufunda kuphela okanye funda Susa.

Khuphela i-firmware yeemveliso ze-ICT

Uqhagamshelwano
Sebenzisa i-WEL-RSBII ukudibanisa i-MTB kunye neemveliso ze-ICT (i-BAICA njl..)

Sebenzisa i-WEL-RHP57 ukuqhagamshela i-MTB kunye ne-XBA.
Nceda ujonge kwi-6-3 Amanyathelo okhuphelo lwe-XBA.

Umyalelo

• Inyathelo loku-1. Cofa u-“Khuphela i-FW” kumaphepha e-Main menu.
• Inyathelo lesi-2. Khetha iGama loMfanekiso elinye ukuqalisa ukukhuphela.

Amanyathelo okhuphelo lwe-XBA kunye nesetingi yokutshintsha kwe-DIP

• Inyathelo I
  • Sebenzisa i-WEL-RHP57 ukuqhagamshela i-MTB kunye ne-XBA. Cofa u-“Khuphela i-FW” kumaphepha e-Main menu.
• Inyathelo lesi-2.
  • Khetha "BA" uze ucinezele "XBA".
• Inyathelo lesi-3.
  • Cofa u-"Enter" ukuqalisa ukukhuphela. Cofa "Buyela" ukubuyisela iphepha langaphambili.
• Inyathelo loku-4.
  • Cinezela "Idiphu zangaphandle" ukuseta iidiphu zangaphandle ze-XBA.
  • Cinezela "Ngaphakathi Dips" ukuseta XBA ngaphakathi dips. Ukuba akukho mfuneko yokuseta iiswitshi zediphu ze-XBA, nceda ucinezele u-“Enter” ukukhuphela i-firmware ngqo.
• Inyathelo lesi-5.
  • Emva kokufaka "Iidiphu zangaphandle" okanye "Iidiphu zangaphakathi", nceda ucinezele naziphi na iidiphu ofuna ukuzihlaziya. (VULA okanye Valiwe)
  • Cinezela "V" ukuseta i-NO.5-NO.8 dips
  • Cofa "Buyela" ukubuyisela iphepha langaphambili.
• Inyathelo loku-6.
  • Cofa u-"Enter" ukuqalisa ukukhuphela.
• Inyathelo lesi-7.
  • Cofa "EWE" ukugcina useto lwediphu kwi-XBA.
  • Cofa u-“HAYI” ungagcini useto lwediphu kwi-XBA.
• Inyathelo loku-8.
  • Khuphela ngempumelelo kwaye ucinezele "Qinisekisa" ubuyele kwiphepha langaphambili.

Ukukhuphela kusilele kuboniswe ngolu hlobo lungezantsi:

UkuLungiswa koLwazi

Uqhagamshelwano Sebenzisa i-WEL-RSBII ukudibanisa i-MTB kunye Iimveliso ze-ICT(BA/CA njl..)

Sebenzisa i-WEL-RHP57 ukuqhagamshela i-MTB kunye ne-XBA.

Umyalelo

• Inyathelo loku-1. Cofa u-“BA Calibration” kumaphepha eMain menu.
• Inyathelo lesi-2. I-MTB ibona igama lemodeli yesixhobo kunye nolwazi lwe-firmware.

I-MTB ayikwazanga ukuxhasa ulungelelwaniso lwesivamvo kwezinye iimveliso ezinokubonakala zingezantsi:

• Inyathelo loku-3. Nceda ufake ikhadi lokulinganisa kwisixhobo. Ulungelelwaniso loluvo luphumelele kwaye useta ngokutsha isixhobo ngokuzenzekela. Ulungelelwaniso loluvo aluphumelelanga.
• Inyathelo loku-4. Cinezela "Qinisekisa" ukubuyisela iphepha langaphambili.

Umthamo webhetri

Umthamo webhetri & neRTC (Ibhetri & RTC)

• Inyathelo loku-1.
  • Cofa "Ibhetri & RTC" kwimenyu engundoqo.
• Inyathelo lesi-2.
  • Cinezela "Seta" ukuseta umhla kunye nexesha le-RTC.
• Inyathelo lesi-3.
  • Cofa "9" ukutshintsha idijithi emiselweyo. ” + “,” ” ukudibanisa/thabatha inani.
  • Cofa "Gcina" ukugcina useto.

Qhagamshela kwisixhobo sePC yeSixhobo

• Inyathelo loku-1. Vula i-SWI kwisimo se-ON kwaye ucinezele "Setha kwakhona".
• Inyathelo loku-2. Nceda ufake i-USB Driver.
• Inyathelo loku-3. Qhagamshela isixhobo, iMTB kunye nePC. (Sebenzisa intambo ye-WEL-RHP57 ukuqhagamshela i-MTB kunye nePC)
• Inyathelo loku-4. Vula isixhobo sesixhobo kwaye ukhethe indawo ebonakalayo.
• Inyathelo loku-5. Khuphela i-firmware yesixhobo.
  • Cinezela "COMI" kunye ne "PROGRAM" ukukhuphela i-firmware yesixhobo.
  • Ukuba isixhobo sePC sibonisa umyalezo wokukhuphela ongaphumeleliyo, nceda ucinezele "COM2" & "PROGRAM" kwaye uzame kwakhona.
• Inyathelo loku-6. Seta kwakhona isixhobo
  • Cinezela "* COMI" kunye "SETHA KWAKHONA". Ukuba isixhobo asisetwanga ngokutsha, nceda ucofe u-“COM2” & “RESET” uze uzame kwakhona.
• Inyathelo loku-7. Cima i-SWI kwimo ye-OFF kwaye ucinezele "Setha kwakhona" ukubuyisela iMenu ePhambili.

Khuphela i-firmware ye-MTB ngomqhubi wepen

• Inyathelo loku-1. Nceda ucime i-MTB kuqala.
  • Cinezela "Qinisekisa".
    
• Inyathelo lesi-2.
  • Iplagi kwiPen drive. I-firmware ye-MTB kumqhubi wepen.
  • Qhubeka ucofa iqhosha elithi "E", emva koko ucofe iqhosha elithi "ON-OFF" ngaxeshanye.
  • Cofa u-“YES” ukukhuphela i-firmware ye-MTB.

Ukulungisa ingxaki

QHAGAMSHELANA

• I-International Currency Technologies Corporation
• No.28, Ln. 15, iCandelo. 6, Minquan E. Rd., Neihu Dist., Taipei City 114, Taiwan
• sales@ictgroup.com.tw. (Intengiso)
• fae@ictgroup.com. tw (yeNkonzo yabaThengi)
• Webindawo: www.ictgroup.com.tw.
• 02016 International Currency Technologies Corporation v.2.o
• Inombolo yendawo: I-H6732A-R

Ukusetyenziswa konyino lweZixhobo

• I-International Currency Technologies Corporation (ICT) onke amalungelo agciniwe.
• Zonke izinto eziqulethweyo ziyipropathi enelungelo lobunikazi be-ICT.
• Zonke iimpawu zorhwebo, iimpawu zenkonzo, kunye namagama orhwebo ngabanikazi be-ICT.
• I-ICT inelungelo ngawo onke amaxesha ukuxela okanye ukuguqula naluphi na ulwazi njenge
• I-ICT ibona kuyimfuneko ukwanelisa nawuphi na umthetho osebenzayo, ummiselo, inkqubo yomthetho, okanye isicelo sikarhulumente, okanye ukuhlela, ukwala ukuthumela, okanye ukususa naluphi na ulwazi okanye imathiriyeli, ngokupheleleyo okanye inxalenye, ngokokubona kwe-ICT.

Amaxwebhu / Izibonelelo

I-iCT H6732A-R yeSixhobo seSixhobo seMisebenzi emininzi [pdf] Isikhokelo soFakelo H67320-R, H6732A-R, H6732A-R Multi Function ToolBox, H6732A-R, Multi Function Toolbox, Function Toolbox, Toolbox

Iimbekiselo

• Incwadi yokusebenzisa