EBYTE ME31 Network IO Networking Module

 

Overview

Product Sumo
ME31-XXAX0060 ine 6-nzira A-mhando relay kubuda, uye inotsigira Modbus TCP protocol kana Modbus RTU protocol yekutora uye kutonga. Panguva imwecheteyo, mudziyo zvakare ine network I / O networking module inogona kushandiswa seyakareruka Modbus gedhi (otomatiki kutumira mirairo ine isiri-yemunharaunda Modbus kero kuburikidza ne serial port/network port).

Functional Features

• Tsigira standard Modbus RTU protocol uye Modbus TCP protocol;
• Tsigira akasiyana-siyana ekugadzirisa software / PLC / touch screen;
• RS485 kutora kutonga I/O;
• RJ45 kutora kutonga I / O, tsigira 4-nzira yekutambira kuwana;
• Tsigira OLED kuratidza kuratidza mamiriro ruzivo, uye gadzirisa mudziyo paramita kuburikidza nemabhatani;
• 6-nzira chinja chinobuda ITA (A-mhando relay);
• Chinja chinobuda (DO) inotsigira nhanho modhi, pulse modhi, yekutevera modhi, reverse yekutevera maitiro, trigger flip mode;
• Tsigira tsika Modbus kero marongero;
• Tsigira 8 yakajairika baud mwero masisitimu;
• Tsigira DHCP uye static IP;
• Tsigira DNS basa, dura rezita rekugadzirisa;
• Tsigira Modbus gedhi basa;

 Chigadzirwa Chekushandisa Topology Dhiyagiramu 

Kurumidza kushandisa

【Cherechedza】 Muedzo uyu unofanirwa kuitwa nemaparamendi emufekitari.

Kugadzirira kwechigadzirwa
Tafura inotevera inoronga zvinhu zvinodiwa pabvunzo iyi:

 Kubatanidza mudziyo 

 RS485 kubatana 

Cherechedza: Kana iyo 485 bhazi yakakwira-frequency chiratidzo ichitumirwa, chiratidzo chewavelength ipfupi pane mutsara wekutapurirana, uye chiratidzo chichagadzira wave wakaratidzwa pamagumo emutsara wekutapurirana, izvo zvinokanganisa chiratidzo chepakutanga. Naizvozvo, zvinodikanwa kuti uwedzere chigadziro chinodzivirira pamagumo emutsara wekutumira kuitira kuti chiratidzo chisaratidze mushure mekusvika kumagumo emutsara wekutumira. Iyo yekupedzisira inopikisa inofanirwa kunge yakafanana neiyo impedance yetambo yekutaurirana, iyo yakajairika kukosha ndeye 120 ohms. Basa rayo nderekufananidza iyo impedance yebhazi uye kuvandudza kupesana-kupindira uye kuvimbika kwekutaurirana kwedata.

 Relay inobuda yekubatanidza 

 Kushandisa nyore 

• Wiring: Komputa yakabatana neRS485 interface ye ME31-XXAX0060 kuburikidza ne USB kuenda kuRS485, A yakabatana neA, uye B yakabatana neB.
• Networking: Isa tambo yetiweki muRJ45 port uye ubatanidze kuPC.
• Simba kupa: Shandisa DC-12V switching power supply (DC 8~28V) kusimba ME31-XXAX0060.

Parameter Configuration
Danho 1: Shandura IP kero yekombuta kuti ienderane nemudziyo. Pano ini ndiri kuigadzirisa ku 192.168.3.100 kuti ive nechokwadi chokuti iri pane imwechete network segment semudziyo uye kuti IP yakasiyana. Kana iwe usingakwanise kubatana nemudziyo mushure mematanho ari pamusoro, ndapota dzima firewall uye edza zvakare;

Danho 2: Vhura mubatsiri wetiweki, sarudza mutengi weTCP, pinda muchengeti ari kure IP192.168.3.7 (default parameter), isa nhamba yechiteshi 502 (default parameter), uye sarudza HEX kutumira.

Control Testing 

Modbus TCP kutonga
Shandisa network mubatsiri kudzora yekutanga DO kubuda kweME31-XXAX0060.

Mamwe mabasa anogona kuedzwa kuburikidza nemirairo iri patafura pazasi.

Basa (basa rekodhi)	Command
Dhonza coil yekutanga (0x05)	01 00 00 00 00 06 01 05 00 00 FF 00
Murairo wakazaruka wakazara (0x0F)	02 00 00 00 00 08 01 0F 00 00 00 06 01 3F
Murairo wakazara wepedyo (0x0F)	02 00 00 00 00 08 01 0F 00 00 00 06 01 00
Verenga zvese DO mamiriro (0x01)	01 00 00 00 00 06 01 01 00 00 00 06

 Modbus RTU kutonga
Shandisa serial port mubatsiri kudzora yekutanga DO kubuda kweME31-XXAX0060.

Mamwe mabasa anogona kuedzwa kuburikidza nemirairo iri patafura pazasi.

Basa (basa rekodhi)	Command
Dhonza coil yekutanga (0x05)	01 05 00 00 FF 00 8C 3A
Murairo wakazaruka wakazara (0x0F)	01 0F 00 00 00 06 01 3F DF 46
Murairo wakazara wepedyo (0x0F)	01 0F 00 00 00 06 01 00 9F 56
Verenga zvese DO mamiriro (0x01)	01 01 00 00 00 06 BC 08

Kutsanangurwa Kwehunyanzvi

Zvinotsanangurwa

Category	Zita	Parameters
Magetsi	Kushanda Voltage	DC8～28V
	Simba chiratidzo	Blue LED chiratidzo
Serial port	CommunicationInterface	RJ45, RS485
	Baud rate	9600bps (inogoneka)
	Protocol	Standard Modbus TCP, Modbus RTU protocol
MODBUS	Kero yemudziyo	Inogona kugadziridzwa neModbus command uye hostcomputer
ITA zvabuda	Nhamba yeDO chiteshi	6 nzira
	ITA chinobuda mhando	Fomu A relay
	ITA kubuda muoti	Level output, pulse output
	Relay kuonana simba	30V/5A, 250V/5A
	Chiratidzo chekubuda	OLED skrini inoratidzira, tsvuku LED chiratidzo
Zvimwe	Kukura Kwechigadzirwa	121mm * 72mm * 34mm (L*W*H)
	Product uremu	150 ±5 g
	Kushanda tembiricha uye mwando	-40 ～ +85℃, 5% ～ 95%RH (hapana condensation)
	Kuchengetedza tembiricha uye humidity	-40 ～ +105℃, 5% ～ 95%RH (hapana condensation)
	Kuisa nzira	Din-rail installation

Mudziyo Default Parameters

Category	Zita	Parameters
Ethernet parameters	Operating mode	TCP server (kusvika ku4-nzira yekuwana mutengi)
	Local IP	192.168.3.7
	Chiteshi chenzvimbo	502
	Subnet mask	255.255.255.0
	Gateway address	192.168.3.1
	DHCP	Close

	Native MAC	Yakatemerwa ne chip (yakagadziriswa)
	Target IP	192.168.3.3
	Target chiteshi	502
	DNS server	114.114.114.114
	Active upload	Close
Serial parameters	Baud rate	9600bps (8 mhando)
	Tarisa nzira	Hapana (default), Odd, Even
	Dhata zvishoma	8
	Mira zvishoma	1
MODBUS parameter	Modbus tenzi-muranda	Muranda
	Kero	1

 Mechanical Dimensional Drawing 

Port uye chiratidzo chiedza tsananguro 

Aihwa.	Label	Enzanisirai
1	TX (LED)	Serial port kutumira data chiratidzo chiedza
2	RX (LED)	Serial port inogamuchira data chiratidzo chiedza
3	LINK (LED)	Chiedza chekubatanidza network
4	NET (LED)	Network data kutumira uye kugamuchira chiratidzo chiratidzo
5	PWR (LED)	Simba rekuisa chiratidzo
6	DO1 (LED)	Yekutanga relay kubuda chiratidzo
7	DO2 (LED)	Chechipiri relay inobuda chiratidzo
8	DO3 (LED)	Chechitatu relay inobuda chiratidzo
9	DO4 (LED)	Yechina relay goho chiratidzo
10	DO5 (LED)	Cheshanu relay kubuda chiratidzo
11	DO6 (LED)	Yechitanhatu relay yekubuda chiratidzo
12	GND	Negative pole yemagetsi ekuisa terminal, DC 8V ~ 28V, 5.08mm Phoenix terminal.
13	VCC	Positive danda remagetsi ekuisa terminal, DC 8V ~ 28V, 5.08mm Phoenix terminal.
14	NO1	Relay 1 inowanzovhurika pini, inoshandiswa nerelay 1 common terminal, 5.08 mm Phoenix terminal.

15	COM1	Yakajairika terminal yerelay 1, inoshandiswa pamwe chete neinowanzo kuvhurika pinof relay 1, 5.08mm Phoenix terminal.
16	NO2	Relay 2 inowanzovhurika pini, inoshandiswa nerelay 2 common terminal, 5.08mmPhoenix terminal.
17	COM2	Yakajairika terminal yerelay 2, inoshandiswa pamwe chete neinowanzo kuvhurika pinof relay 2, 5.08mm Phoenix terminal.
18	NO3	Relay 3 inowanzovhurika pini, inoshandiswa nerelay 3 common terminal, 5.08mmPhoenix terminal.
19	COM3	Yakajairika terminal yerelay 3, inoshandiswa pamwe chete neinowanzo kuvhurika pinof relay 3, 5.08mm Phoenix terminal.
20	NO4	Relay 4 inowanzovhurika pini, inoshandiswa nerelay 4 common terminal, 5.08mmPhoenix terminal.
21	COM4	Relay 4 common terminal, inoshandiswa nerelay 4 inowanzovhurika pini, 5.08mmPhoenix terminal.
22	Ethernet	Ethernet interface, yakajairwa RJ45 interface.
23	COM6	Yakajairika terminal yerelay 6, inoshandiswa pamwe chete neinowanzo kuvhurika pinof relay 6, 5.08mm Phoenix terminal.
24	NO6	Relay 6 inowanzovhurika pini, inoshandiswa nerelay 6 common terminal, 5.08mmPhoenix terminal.
25	COM5	Yakajairika terminal yerelay 5, inoshandiswa pamwe chete neinowanzo kuvhurika pinof relay 5, 5.08mm Phoenix terminal.
26	NO5	Relay 5 inowanzovhurika pini, inoshandiswa nerelay 5 common terminal, 5.08mmPhoenix terminal.
27	GND	Chiratidzo pasi, 5.08mm Phoenix terminal.
28	485-A	Iyo A yeserial port yakabatana neA interface yechishandiso chekunze, uye 5.08mm Phoenix terminal.
29	485-B	Iyo B yeserial port yakabatana neB interface yechishandiso chekunze, uye 5.08mm Phoenix terminal.

 Product Function Sumo

ITA zvabuda
Relay yekubuda modhi: inoburitsa akasiyana modhi inobuda zvinoenderana neiyo modhi yakaiswa nemushandisi, uye iyo nhanho yekubuda inovhurwa nekukasira.

 Input count
Tsigiro yekuverenga DI yekupinda, vashandisi vanogona kugadzirisa inokwira kumucheto kutora, kudonha kumucheto kutora, uye nhanho yekutora zvinoenderana nezvavanoda. Iwe unogonawo kuchinja nzira yekuchenesa maererano nezvaunoda.

Trigger nzira:

• Rising edge: Kana iyo inokwira inounganidzwa (haisi kuverengerwa kana yakavhurwa, inoverengwa kana yakadzimwa), ichaverengerwa kamwe chete.
• Kudonha kumucheto: Kana mupendero unodonha uchiunganidzwa (kuverenga kana uchinge wavhurwa, uye usingaverenge kana waburitswa), verenga kamwe.
• Level: Mipendero miviri inounganidzwa uye inoverengwa kamwechete zvichiteerana.

Kuchenesa nzira:

• Otomatiki: Chishandiso chinozojekesa pese pese iyo DI kuverenga kukosha kwerejista (0x09DF~0x09E6) inoverengwa. Manual: Mumanyorero maitiro, zvinodikanwa kunyora 1 kune yakajeka chiratidzo rejista (0x0AA7~0x0AAE), uye yega yega rejista inodzora chiratidzo chimwe chakajeka.

Level output
Kubuda zvinoenderana nechiyero chakatarwa nemushandisi, chinja hunhu hweiyo level mode yakafanana nebasa rekuzvivharira switch.

Pulse output
Mushure meiyo switch inobuda DO yavhurwa, switch inobuda DO inodzima otomatiki mushure mekuchengetedza iyo set pulse wide time (mu ms). Iyo pulse width setting range ndeye 50 ~ 65535ms (50ms by default).

Tevedzera modhi
Zvinoenderana neinoteedzera sosi inogadziriswa nemushandisi (kana chishandiso chine AI yekutora kana DI yekuona basa, zvese DI kana AI inogona kushandiswa seyanotevera sosi, zvikasadaro basa iri harina basa) kushandura iyo relay mamiriro, uye akawanda anobuda anogona kutevera. zvakafanana tevera source kubuda. Kuzvitaura zviri nyore, DI inoona iyo yekuisa, uye inoburitsa otomatiki relay inoishandisa seyekutevera sosi (ye ex.ample: DI iri 1, DO yakavharwa). Kana iyo yekutevera yakavhurwa, iyo yekutevera sosi inofanirwa kugadziridzwa panguva imwe chete, zvikasadaro ichatevera yekutanga yekuisa nekukasira.

Reverse kutevera mode
Zvinoenderana neinoteedzera sosi inogadziriswa nemushandisi (kana chishandiso chine AI yekutora kana DI yekuona basa, zvese DI kana AI inogona kushandiswa seyanotevera sosi, zvikasadaro basa iri harina basa) kushandura iyo relay mamiriro, uye akawanda anobuda anogona kutevera. zvakafanana tevera source kubuda. Kuzvitaura zviri nyore, DI inoona inopinza, uye inoburitsa otomatiki iyo relay inoitevera sesosi (ye ex.ample: DI ndeye 1, DO yakabviswa). Kana iyo yekutevera yakavhurwa, iyo yekutevera sosi inofanirwa kugadziridzwa panguva imwe chete, zvikasadaro ichatevera yekutanga yekuisa nekukasira.

Batidza toggle mode
Zvinoenderana neinoteedzera sosi inogadziriswa nemushandisi (kana chishandiso chine AI yekutora kana DI yekuona basa, zvese DI kana AI inogona kushandiswa seyanotevera sosi, zvikasadaro basa iri harina basa) kushandura iyo relay mamiriro, uye akawanda anobuda anogona kutevera. zvakafanana tevera source kubuda. Zvichitaurwa zviri nyore, kana DI inogadzira chiratidzo chetrigger (inokwira mupendero kana inodonha mupendero), DO ichave neshanduko yenyika. Kana iyo trigger flip modhi ikabatidzwa, iyo inotevera sosi inofanirwa kugadzirwa panguva imwe chete, zvikasadaro ichatevera yekutanga kuiswa nekukasira.

Simba-pane nyika
Maererano nehurumende yakagadzwa nemushandisi. Mushure mekunge mudziyo wabatidzwa, iyo inoburitsa relay inobatidzwa zvinoenderana nemamiriro akatarwa nemushandisi, uye inodzimwa nekusarudzika.

Modbus Gateway
Chigadzirwa chacho chinogona kutumira pachena mirairo yeModbus kubva kunetiweki / serial port kuenda kune serial port / network, uye mirairo yeModbus yemunharaunda inoitwa zvakananga.

 Modbus TCP/RTU protocol kutendeuka
Mushure mekuvhurwa, iyo Modbus TCP data padivi retiweki ichashandurwa kuita Modbus RTU data.

Modbus Kero Sefa
Iri basa rinogona kushandiswa kana imwe gadziriso software kana gadziriso chidzitiro chinoshandiswa semugadziri kuti asvike serial port yechigadzirwa, uye gedhi rekushandisa rinoshandiswa, muranda ari pamagumo etiweki, uye Modbus TCP kuRTU basa rakavhurwa. Varanda vakawanda mubhazi vanogona kukonzera kuvhiringidzika kwedata. Panguva ino, kugonesa kusefa kero kunogona kuve nechokwadi chekuti kero yakatsanangurwa chete ndiyo inogona kupfuura nepamudziyo; kana parameter iri 0, iyo data ichaendeswa pachena; apo parameter iri 1-255, chete seti yemuranda muchina kero data.

Modbus TCP Protocol Data Frame Tsananguro

TCP chimiro chimiro:

Transaction ID	Protocol ID	Urefu	Kero yemudziyo	Basa rekodhi	Data chikamu
2 Bit	2 Bit	N+2 Bit	1 Bit	1 Bit	N Bit

• Transaction ID: Inogona kunzwisiswa seserial nhamba yemeseji. Kazhinji, 1 inowedzerwa mushure mekutaurirana kwega kwega kusiyanisa akasiyana mameseji edata.
• Protocol identifier: 00 00 zvinoreva Modbus TCP protocol.
• Kureba: Inoratidza kureba kweiyo inotevera data mumabhayithi.

Example: tora DI chimiro

01 00	00 00	00 06	01	02	00 00 00 04
Transaction ID	Protocol ID	Urefu	Kero yemudziyo	Basa rekodhi	Data chikamu

Modbus RTU protocol data furemu tsananguro

RTU furemu fomati:

Kero yemudziyo	Basa rekodhi	Data chikamu	Tarisa kodhi CRC
1 Bit	1 Bit	N Bit	2 Bit

Example: tora DI chimiro chekuraira 

01	02	00 00 00 04	79 C9
Mudziyo Modbus kero	Basa rekodhi	Data chikamu	CRC cheki kodhi

Active upload

• Chishandiso chinotsigira basa rekurodha analog yekuisa kukosha nguva nenguva. Kuisa kukosha kwerejista inoenderana kunogona kudzora nguva yenguva uye kana kuisa.
• Midziyo ine dhijitari inopinza inoshinga kurodha kamwe mushure mekubudirira kubatana kune server, uye ipapo iyo yedhijitari inozoiswa ichitevera shanduko yemamiriro. Midziyo ine analog yekupinda inoshuma mamiriro eanalog yekupinda zvinoenderana neyakagadziriswa inoshanya yekuisa nguva yenguva (nguva yekumisikidza ndeye 1-65535).
• Kana yaiswa ku0, kurodha kunovharwa; kana ikaiswa kune imwe yakanaka integer value N, kukwidzwa kuchaitwa panguva dzeN masekondi.

[Cherechedza] Chishandiso chinogona kushanda chete kana chikagadziriswa mutengi modhi, uye kukosha kwerejista hakusi zero kugonesa kurodha.

 Custom Module Information

Modbus Kero
Kero yemudziyo ndeye 1 nekukasira, uye kero inogona kuchinjwa, uye kero yekero ndeye 1-247.

Zita reModule
Vashandisi vanogona kugadzirisa zita remudziyo zvinoenderana nezvavanoda kusiyanisa, kutsigira Chirungu, madhijitari fomati, anosvika makumi maviri mabhayiti.

Network parameter
Kunze kwekunge zvatsanangurwa neimwe nzira: inotevera inetiweki-inoenderana paramita default kune IPV4-ane hukama paramita.

1. MAC yechishandiso: mushandisi anogona kuiwana nekuverenga rejista yakataurwa, uye iyi parameter haigone kunyorwa.
2. IP kero: mudziyo IP kero, inoverengwa uye inonyorwa.
3. Modbus TCP chiteshi: nhamba yechiteshi chechishandiso, inoverengwa uye inonyorwa.
4. Subnet mask: kero mask, inoverengwa uye inonyorwa.
5. Kero yegedhi: gedhi.
6. DHCP: Seta nzira iyo mudziyo unowana IP: static (0), ine simba (1).
7. Target IP: Kana chishandiso chikashanda mumhando yemutengi, iyo yakananga IP kana zita rezita rekubatanidza mudziyo.
8. Chiteshi chekuenda: Kana chishandiso chiri kushanda mune mutengi modhi, nzvimbo yekuenda yekubatanidza mudziyo.
9. DNS server: Chishandiso chiri mumutengi modhi uye chinogadzirisa zita rezita reseva.
10. Module yekushanda modhi: chinja maitiro ekushanda emodule. Server: Chigadzirwa chacho chakaenzana nea
    server, yakamirira mutengi wemushandisi kuti abatane. Nhamba yepamusoro yekubatanidza ndeye 4. Mutengi: Chigadzirwa chacho chinonyatsobatanidza kune chinangwa cheIP uye chiteshi chakaiswa nemushandisi.
11. Active upload: Kana iyi parameter isiri 0, uye mudziyo uri mucustomer modhi, iyo discrete yekuisa mamiriro emudziyo inozoiswa kune server kana yakabatana kekutanga kana iyo yekuchinja shanduko, uye iyo analogi yekupinda ichaiswa zvinoenderana nenguva yakarongwa.

Serial Port Parameters
Parameters yekuseta serial kutaurirana:

Default parameters:

• Baud rate: 9600 (03);
• Data bit: 8bit;
• Kumira zvishoma: 1bit;
• Cheka nhamba: HAPANA(00);

 Baud rate:

Baud rate kodhi kukosha tafura
0x0000	1200
0x0001	2400
0x0002	4800
0x0003 (default)	9600
0x0004	19200
0x0005	38400
0x0006	57600
0x0007	115200

 Tarisa Digit:

Tarisa Digit
0x0000 (default)	HAKUNA
0x0001	ODD
0x0002	EVEN

OLED kuratidza uye parameter kumisikidzwa
Chiratidziro chekuratidzira chinosanganisira peji yekuratidzira ruzivo (DO mamiriro ekuratidzira peji) uye peji yekumisikidza paramende (chikamu chidimbu).

Information Display Interface
Kusanganisira iyo DO mamiriro ekuratidzira peji, pfupi dzvanya kumusoro uye pasi mabhatani kuti uchinje iyo interface.

Equipment parameter kuratidza interface
Dzvanya bhatani rekuruboshwe kana rekurudyi kuti uise pasiwedhi yekuisa interface, zadzisa iyo chaiyo password yekuisa, uye ratidza mudziyo weparameta ruzivo interface (password interface: default password: 0000. Kapfupi dzvanya pakati kuti uone pasiwedhi; Mabhatani ekuruboshwe nekurudyi anogona kushandura password bit; makiyi ekukwira nekudzika anogona kushandura kukosha kweiyo bit. Pasiwedhi ine huwandu hwemanhamba mana, uye imwe neimwe yekuisa inhamba kubva 4-0)

Iyo parameter yekumisikidza interface kubva kumusoro kusvika pasi ndeye:

1. Modbus kero;
2. Baud rate;
3. Data bits;
4.  Check Digit;
5. Stop bit;
6. Local port;
7. Local IP address;
8. Network mode;
9. Gateway;
10. Subnet mask;
11. DNS;
12. MAC kero;
13. DHCP;
14. Target IP;
15. Destination port;
16.  Modbus TCP/RTU protocol kutendeuka;
17. Active upload;
18. Modbus kero kusefa;;

 Equipment Parameter Configuration Interface
Dzvanya uye ubate bhatani rekusimbisa kuti uise iyo password yekuisa interface, zadzisa iyo chaiyo password yekuisa, uye isa iyo yekumisikidza interface (password interface: default password: 0000; ipfupi tinya pakati kuti uone password, mabhatani ekuruboshwe nekurudyi chinja password bit, uye kumusoro uye pasi mabhatani chinja kukosha kweiyo bit , password ine huwandu hwemanhamba mana, uye yega yega 4-0 nhamba). Sarudza chinhu chekumisikidza, isa iyo parameter yekumisikidza peji uye pfupi dzvanya kumusoro uye pasi makiyi kuti uchinje chinhu chekuisa;

Sarudza chinhu chekumisikidza, pfupiso yekusimbisa kana kudzvanya kurudyi, iyo yekumisikidza chinhu inowana iyo cursor inomiririra kusarudzwa uye isa chinhu chekuisa; Gadzirisa kukosha kweparameter: Mushure mekusarudza chinhu chekuisa, kumusoro uye pasi makiyi anogona kushandura kukosha kana kukosha kwesarudzo; makiyi ekuruboshwe nekurudyi anofambisa chitubu muchinhu cheparameter; Simbisa kukosha kweparameter: Mushure mekugadzirisa kukosha kweparameter, dzvanya kiyi yekuisa kuti ubude pane yazvino kuseta chinhu. Sevha zvigadziriso zveparameta uye wotangazve: Mushure mekumisa maparamendi, fambisa chitubu kuti uchengetedze uye utangezve, wobva wapfupika.

dzvanya kiyi yekusimbisa kuti uise yekusimbisa chengetedza uye wotangazve mamiriro. Pfupi dzvanya kiyi yekusimbisa (dzvanya mamwe makiyi kuti ubve iyo yekusimbisa mamiriro) kuchengetedza ma paramita uye wotangazve mudziyo.
Buda usina kuchengetedza ma paramita: fambisa chitubu kuti ubude, wobva wadzvanya kiyi yekusimbisa kuti upinde munzvimbo yekubuda yekusimbisa, pfupikisa kiyi yekusimbisa (dzvanya mamwe makiyi kuti uburitse iyo yekusimbisa mamiriro), wobva wabuda paparameter configuration interface usina kuchengetedza ma paramita. Pakati pavo, data bit uye stop bit haigoni kuiswa. Mushure mokunge DHCP mode yakashandurwa, kero ye IP yemunharaunda, gedhi, uye subnet mask haigoni kugadziriswa uye inongopiwa ne router;

Kurara kweSkirini
Chidzitiro chemudziyo chine basa rekurara, iro rinodzimwa nekusagadzika uye rinogona kusetwa kuti rirambe riri mukugadzirisa interface. Mune chero interface, kana pasina bhatani mashandiro e180 masekonzi, iyo skrini ichapinda yekurara mode. Panguva ino, iyo interface inoratidza Ebyte robhoti. Dzvanya chero bhatani rinogona kubuda mumodhi yekurara. Kana iyo skrini iri mumodhi yekurara, kushanda nesimba kwemapurogiramu emudziyo kunovandudzwa.

MODBUS parameter kumisikidza
Ongorora: Zvinoenderana nezvinodiwa zvekushandisa, imwe software (yakadai saKingView) inoda kuwedzera +1 paunoshandura kubva kuhexadecimal kuenda ku decimal kuitira kuti ushande pamarejista (ese madhisimali ari patafura akatogadziridzwa ne +1).

ITA Register List

Register basa	Nyoresa kero (HEX)	Bhalisa kero (DEC)	Register type	Number	Shanda	Data Range/Mashoko	Related function code
ITA chimiro	0x0000	0-0001	Coil	6	RW	Nyora kuti uchinje ikozvino DO mamiriro, verenga kuti uwane ikozvino DO mamiriro	R：0x01 W：0x0F、0x05
Taura kuti DO yakabatidzwa riini	0x0064	4-0101	Kubata rejista	6	RW	The default mamiriro coil pashure simba pamusoro	R：0x01 W：0x0F、0x05
DOworking mode	0x0578	4-1401	Kubata rejista	6	RW	0x0000 nhanho hapana yekutevera maitiro 0x0001 Pulse hapana yekutevera maitiro 0x0002 Tevera maitiro 0x0003 Reverse Follow Mode 0x0004 Trigger Flip Mode	R：0x03 W：0x06、0x10
ITA pulsewidth	0x05DC	4-1501	Kubata rejista	6	RW	Range: 50-65535ms	R：0x03W：0x06、0x10
TEVERA Kwakabva	DI:0x0000 AI:0x8000	DI:4-0001 AI:4-32769	Kubata rejista	6	RW	Chiyero: 0x0000: Tevedzera DI1 0x0001: Tevera DI2 0x8000: Tevera AI10x8001: Tevera AI2	R：0x03 W：0x06、0x10

 Module inoenderana nerejista

Register basa	Nyoresa kero (HEX)	Bhalisa kero (DEC)	Register type	Number	Shanda	Data Range/Mashoko	Related function code
Module kero	0x07E8	4-2025	Kubata rejista	1	RW	Modbus kero,1～247 kero dzinogadziriswa	R:0x03W:0x06
Module modhi	0x07D0	4-2001	Kubata rejista	12	R	Tora iyo yazvino modhi	R:0x03
Firmware vhezheni	0x07DC	4-2013	Kubata rejista	1	R	Tora iyo firmware version nhamba	R:0x03
Module zita	0x07DE	4-2015	Kubata rejista	10	RW	Custom module zita	R:0x03W:0x10
Modulerestart	0x07EA	4-2027	Kubata rejista	1	W	Nyora 0x5BB5 kuti utangezve.	W:0x06
Dzosera fekitari parameters	0x07E9	4-2026	Kubata rejista	1	W	Nyora 0x5BB5 kuti udzorere marongero efekitori.	W:0x06
Seri baud rate	0x0834	4-2101	Kubata rejista	1	RW	Ona baud rate kodhi tafura, Default ndeye 9600 (0x0003)	R：0x03W：0x06、0x10
Serial cheki digit	0x0836	4-2103	Kubata rejista	1	RW	0x0000 hapana checksum (default) 0x0001 odd parity0x0002 even parity	R：0x03 W：0x06、0x10

Network ine chekuita nerejista

Register basa	Bhalisa kero(HEX)	Bhalisa kero(DEC)	Register type	Number	Shanda	Data Range/Mashoko	Related function code
Module mac kero	0x0898	4-2201	Kubata rejista	3	R	Mudziyo MAC parameters	R:0x03
Local IP address	0x089B	4-2204	Kubata rejista	2	RW	Zvisizvo: 192.168.3.7	R：0x03W：0x06、0x10
chiteshi chengarava	0x089D	4-2206	Kubata rejista	1	RW	1～65535, default: 502	R：0x03W：0x06、0x10
Subnet mask kero	0x089E	4-2207	Kubata rejista	2	RW	Zvisizvo: 255.255.255.0	R：0x03 W：0x06、0x10
Gateway address	0x08A0	4-2209	Kubata rejista	2	RW	Zvisizvo: 192.168.3.1	R：0x03W：0x06、0x10

DHCPmode setting	0x08A2	4-2211	Kubata rejista	1	RW	0x0000 static IP (default) 0x0001 Wana IP otomatiki	R：0x03 W：0x06、0x10
TargetIP/domain name	0x08A3	4-2212	Kubata rejista	64	RW	Tambo fomati yakachengetwa muIP/domain zita default IP: 192.168.3.3	R：0x03 W：0x06、0x10
Chiteshi cheSeva	0x08E3	4-2276	Kubata rejista	1	RW	0-65535, default 502	R：0x03W：0x06、0x10
DNS server IP kero	0x08E4	4-2277	Kubata rejista	2	RW	Chaizvoizvo zana	R：0x03 W：0x06、0x10
Modulework mode	0x08E6	4-2279	Kubata rejista	1	RW	0x0000 server mode0x0001 mutengi maitiro	R：0x03W：0x06、0x10
Activeupload	0x08E7	4-2280	Kubata rejista	1	RW	0x0000 yakaremara, vamwe:1～65535s kutenderera kutumira	R：0x03W：0x06、0x10
MOSBUS TCP/RTU inoshandura inokwanisa	0x08E8	4-2281	Kubata rejista	1	RW	0, kuvhara, 1 yakavhurika protocol shanduko	R：0x03 W：0x06、0x10
MODBUSaddress kusefa	0x08E9	4-2282	Kubata rejista	1	RW	0: transparent transparent, 1- 255: kana iyo data isiri yemunharaunda, tarisa kero yemuranda yemurairo, uye inogona kupfuudzwa kana iri iyo yakatarwa kukosha.	R：0x03 W：0x06、0x10

 Exampzvinyorwa zveModbus mirairo yekushanda

Verenga coil (DO) chimiro
Shandisa iyo coil state yekuverenga (01) kodhi yebasa kuti uverenge inobuda coil state, yeexample:

01	01	00 00	00 04	3D C9
Modbus kero	Basa rekodhi	Bhalisa kero yekutanga	Nhamba yemakoiri ekubuda akaverengwa	CRC cheki kodhi

Mushure mekutumira murairo uri pamusoro kumudziyo kuburikidza nebhazi re485, chigadziro chichadzorera zvinotevera:

01	01	01	01	90 48
Modbus kero	Basa rekodhi	Bytes yedata	Yakadzoserwa mamiriro data	CRC cheki kodhi

Iyo data yemamiriro 01 yakadzoswa pamusoro inoratidza kuti yakabuda DO1 yakabatidzwa.

Kudzora coil (DO) mamiriro
Tsigiro yekushanda kwekoiri imwe chete (05), kushanda kwemakoiri akawanda (0F) kodhi kodhi yekushanda.
Shandisa murairo we05 kunyora murairo mumwechete, wemuenzanisoample:

01	05	00 00	FF 00	8C 3A
Modbus kero	Basa rekodhi	Bhalisa kero yekutanga	Kuenderera mberi: FF 00Vhara: 00 00	CRC cheki kodhi

Mushure mekutumira murairo uri pamusoro kumudziyo kuburikidza nebhazi re485, chigadziro chichadzorera zvinotevera:

01	05	00 00	FF 00	8C 3A
Modbus kero	Basa rekodhi	Register kero yekutanga	Operation nzira	CRC cheki kodhi

Iyo DO1 coil yakabatidzwa.
Shandisa 0F basa kodhi semurairo wekunyora akawanda macoil, eexample:

01	0F	00 00	00 04	01	0F	7E92
Modbus kero	Basa rekodhi	Kero yekutanga	Nhamba yemahara	Bytes yedata	Dzora coil data	CRC cheki kodhi

Mushure mekutumira murairo uri pamusoro kumudziyo kuburikidza nebhazi re485, chigadziro chichadzorera zvinotevera:

01	0F	00 00	OO O4	54 08
Modbus kero	Basa rekodhi	Register kero	Nhamba yemahara	CRC cheki kodhi

Makoiri ese akabatidzwa.

 Verenga bhuku rekubata
Shandisa 03 kodhi yebasa kuti uverenge imwe kana akawanda marejitari kukosha, kune example:

01	03	05 78	00 01	04 DF
Modbus kero	Basa rekodhi	Register kero yekutanga	Nhamba yemarejista akaverengwa	CRC cheki kodhi

Mushure mekutumira murairo uri pamusoro kumudziyo kuburikidza nebhazi re485, chigadziro chichadzorera zvinotevera:

01	03	02	00 00	B8 44
Modbus kero	Basa rekodhi	Bytes yedata	Yakadzoserwa data	CRC cheki kodhi

Iri pamusoro 00 00 zvinoreva kuti DO1 iri muzinga rekubuda mode.

 Operation holding register
Tsigiro yekushanda kwerejista imwe chete (06), kushanda kweakawanda marejista (10) basa rekodhi kodhi. Shandisa 06 kodhi yebasa kunyora rejista imwechete yekubata, semuenzanisoample: isa maitiro ekushanda eDO1 kune pulse mode:

01	06	05 78	00 01	C8 DF
Modbus kero	Basa rekodhi	Register kero	Nyora kukosha	CRC cheki kodhi

Mushure mekutumira murairo uri pamusoro kumudziyo kuburikidza nebhazi re485, chigadziro chichadzorera zvinotevera:

01	06	05 78	00 01	C8 DF
Modbus kero	Basa rekodhi	Register kero	Nyora kukosha	CRC cheki kodhi

Kana iyo shanduko yakabudirira, iyo data mu0x0578 rejista ndeye 0x0001, uye iyo pulse yekubuda mode inobatidzwa.
Shandisa kodhi yebasa 10 kunyora akawanda ekubata register mirairo, yeexample: isa maitiro ekushanda eDO1 uye DO2 panguva imwe chete.

01	10	05 78	00 02	04	00 01 00 01	5A 7D
Modbus kero	Function code	Register musoro kero	Nhamba ye mabhuku	Nhamba yemabhaiti e zvakanyorwa data	Written data	CRC tarisa code

Mushure mekutumira murairo uri pamusoro kumudziyo kuburikidza nebhazi re485, chigadziro chichadzorera zvinotevera:

01	10	05 78	00 02	C1 1D
Modbus kero	Function code	Register kero	Nhamba yezvinyorwa	CRC cheki kodhi

Kana kugadziridzwa kwacho kwabudirira, kukosha kwemarejista maviri akateedzana kutanga ne0x0578 ari 0x0001 uye 0x0001 zvakateerana, achimaka DO1 uye DO2 kugonesa kubuda kwepulse.

Configuration Software

Kuwana uye Kudzora

1. Danho 1: Batanidza mudziyo kune yekumisikidza software.
   1. Iwe unogona kugadzirisa mudziyo nekusarudza iyo interface (serial port / network port); kana ukasarudza chiteshi chetiweki, unofanira kutanga wasarudza kadhi retiweki wobva watsvaga mudziyo.
   2. Kana ukasarudza serial port, iwe unofanirwa kusarudza inoenderana serial port nhamba, uye yakafanana baud rate, data bit, stop bit, parity bit uye kero segment yekutsvaga renji semudziyo, wobva watsvaga.
2. Danho 2: Sarudza chinoenderana mudziyo.
3. Danho 3: Dzvanya mudziyo pamhepo kuti upinde iyo IO yekutarisa. Inotevera ndiyo IO yekutarisa skrini inoratidzwa.

Parameter inogadzirisa interface

1. Danho 1: Batanidza mudziyo unoreva "Kuwana uye Kudzora".
2. Danho rechipiri: Unogona kugadzirisa zvigadziriso zvemidziyo, network parameter, DI parameters, AI parameters, DO parameters, uye AO parameters (yeex.ample: kana mudziyo usina basa reAO, iyo AO paramita haigone kugadziridzwa)
   Copyright ©2012–2024, Chengdu Ebyte Electronic Technology Co.,Ltd
3. Nhanho 3: Mushure mekugadzirisa maparamita, tinya Dhawunirodha Paramita. Mushure memeseji yekukurumidza mune yekubuda kwelogi inoratidza kuti ma paramita akachengetedzwa zvinobudirira, tinya Restart mudziyo. Mushure mekunge mudziyo watangazve, iyo yakagadziridzwa parameter ichaita.

Ongorora nhoroondo

Version	Revision date	Revision Notes	Maintenance murume
1.0	2023-6-6	Shanduro yekutanga	LT
1.1	2024-10-18	Ongororo yezvemukati	LT

Nezvedu
Tsigiro yehunyanzvi: support@cdebyte.com
Zvinyorwa uye RF Setting download link: https://www.ru-ebyte.com

• Tel:+86-28-61399028
• Fax: 028-64146160
• Web：https://www.ru-ebyte.com
• Kero:Innovation Center D347, 4# XI-XIN Road,Chengdu, Sichuan, China

FAQ

• Mubvunzo: Iyo ME31-XXAX0060 module inogona kushandiswa munzvimbo dzekunze?
  A: Iyo module yakagadzirirwa kushandiswa kwemukati chete uye haifanirwe kuratidzwa kune ekunze mamiriro.
• Q: Mangani marelay ekubuda anowanikwa pane ME31-XXAX0060 module?
  A: Iyo module inopa X relay zvabuda zvekutonga zvinangwa.

Zvinyorwa / Zvishandiso

EBYTE ME31 Network IO Networking Module [pdf] User Manual ME31-XXAX0060, ME31 Network IO Networking Module, ME31, Network IO Networking Module, IO Networking Module, Networking Module, Module

References

• User Manual